How to Reset the Maintenance Reminder on Volkswagen Tiguan?

What is the displacement of the Audi Q5 40TFSI?

The Audi Q5 40TFSI has a 2.0T displacement. Here are the details about the Audi Q5 40TFSI: 1. Meaning: The number '40TFSI' at the rear of the car represents the vehicle's acceleration value. A higher number indicates faster acceleration. 2. Configuration: The Q5 40TFSI is a midsize SUV with body dimensions of 4629mm in length, 1898mm in width, and 1655mm in height. It has a wheelbase of 2807mm and a fuel tank capacity of 75L. The Q5 40TFSI is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 230ps, a maximum power of 169kw, and a maximum torque of 350nm. It is paired with an 8-speed automatic transmission. The front suspension is a five-link independent suspension, and the rear suspension is a trapezoidal link independent suspension.

10

3

Share

How to Check Brake Pad Wear?

Methods for observing car brake pad wear are as follows: 1. Check thickness: The thickness of brake pads greatly affects braking performance. When pads become thin, timely replacement is necessary to avoid abnormal braking while driving. Generally, new brake pads are about 1.5cm thick. For safety, consider replacing them when worn down to 0.5cm; 2. Dashboard alert: Many modern cars have warning systems that help drivers monitor brake system status. If there's an issue with the brake pads, the brake warning light on the dashboard will illuminate, prompting the owner to inspect and determine if replacement is needed; 3. Sound: Car brake pads are typically made of iron. If unusual noises occur during braking and persist, immediate inspection is required as this may indicate the pads have exceeded their wear limit and need replacement; 4. Braking performance: Experienced drivers can assess pad wear through braking effectiveness. If braking becomes less effective or the pedal position feels noticeably lower during emergency stops, it indicates significant pad wear requiring prompt replacement.

16

3

Share

Which Button is the Cruise Control?

Currently, most cruise control systems mainly consist of the following buttons: the power button (ON/OFF), the cancel button (CANCEL), the set current speed button (SET), the resume set speed button (RES), the accelerate button (+) usually paired with the RES button, and the decelerate button (-) paired with the SET button. Below are the conditions under which cruise control should not be used: 1. Non-enclosed roads: In principle, cruise control should be used on highways or fully enclosed roads. On non-enclosed roads, complex road conditions are not conducive to traffic safety; 2. Rainy or snowy days: Use with caution on rainy days and avoid on snowy days; 3. Mountainous or winding roads: Use with caution on roads with many turns or curves. Under normal circumstances when exiting a curve, it is necessary to appropriately accelerate to provide greater steering force. In cruise control mode, the vehicle automatically maintains a constant speed, with the throttle controlled by the onboard computer, which often poses a danger when driving on winding roads.

9

3

Share

How to Transfer a Company-Owned Vehicle to an Individual?

Go to the vehicle management office to obtain the vehicle transfer application form and agreement. Fill out the transfer application form and agreement. For company-owned vehicles: the company seal is required, along with proof from both the buyer and seller, a copy of the new owner's business license, and for passenger cars, a copy of the allocation certificate. Here are additional details: 1. Vehicle Transfer: Clear any traffic violation records of the vehicle to ensure the traded vehicle is within its annual inspection validity period. With the completed transfer application form, agreement, relevant copies, and the original vehicle license, go to the used vehicle trading point to obtain the appraisal form. The owner should bring all necessary documents to the vehicle management office to complete the vehicle transfer approval process. 2. Notes: Before purchasing a vehicle, the buyer should check whether the vehicle's documentation is complete and verify if the vehicle can be legally transferred before inspecting the vehicle's condition. When buying a used car, the first step is always to check the vehicle's documentation—only vehicles with complete documentation can be legally traded.

7

1

Share

Why does the brake feel soft when pressed?

The reasons for a soft brake pedal are: 1. Brake system oil leakage; 2. Deteriorated brake fluid; 3. Excessive wear of brake pads; 4. Damage to the brake master cylinder. The brake is a mechanical braking device that can slow down the vehicle, also known as a decelerator. The car brake pedal is located under the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake shoes on the brake drum, clamping the brake disc, thereby slowing down or stopping the car. When driving in water, the wheels are almost submerged, leaving a layer of water film between the brake shoes and the brake drum, acting like a lubricant, reducing the friction between them and making it difficult to control the car to stop. Additionally, the water inside the drum is not easily dispersed.

16

4

Share

What are the regulations for motorcycle color changes?

Motor vehicle owners must bring the motor vehicle certificate, driving license, and ID card to the vehicle management office at the registration location to apply for a change of registration. Below is more information about motorcycle color changes: 1. Relevant regulations: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," registered motor vehicles must apply for a change of registration with the traffic management department of the public security authority under the following circumstances: changing the body color of the motor vehicle. 2. Precautions: The appearance cannot be modified, the horn cannot be modified, and modifications must be legal. Illegal motor vehicle modifications refer to alterations to the vehicle's appearance, power system, transmission system, or braking system that exceed the original design standards and are not permitted by national laws or agreed upon by the manufacturer, including the replacement of key components. Article 16, Item 1 of the "Road Traffic Safety Law of the People's Republic of China" stipulates that no unit or individual may assemble a motor vehicle or alter the registered structure, construction, or characteristics of a motor vehicle without authorization.

10

5

Share

How to Reset the Maintenance Reminder on Volkswagen Tiguan?

What is the displacement of the Audi Q5 40TFSI?

How to Check Brake Pad Wear?

Which Button is the Cruise Control?

How to Transfer a Company-Owned Vehicle to an Individual?

Why does the brake feel soft when pressed?

What are the regulations for motorcycle color changes?

What is the most fuel-efficient RPM for a car engine?

What is the role of the blower in a car's air conditioning system?

How Many Cylinders Does the Chevrolet Cavalier Engine Have?

What is the current load capacity for a 4-axle truck with front 4 and rear 8 wheels?