···
Log in / Register

How to reset the maintenance reminder on Volkswagen Lamando?

3 Answers
StElias
07/30/25 2:57am
Method to clear the maintenance reminder on Volkswagen Lamando: With the car turned off, first turn the key to the OFF position. Hold down the (maintenance reset button) with your left hand, and simultaneously turn the key to the ON position with your right hand. Wait a moment, and the wrench icon on the dashboard will disappear. If the wrench icon disappears, it means the maintenance reset was successful. Here are some additional notes: 1. Please do not reset the maintenance display between maintenance cycles to avoid incorrect displays. The maintenance reminder function is only an auxiliary tool; the detailed maintenance intervals should still follow the maintenance regulations. 2. If the car battery is disconnected for a long time, the system may not correctly calculate the next maintenance due date. To check maintenance information, simply hold down the "Reset" button while the ignition is on until the display shows the maintenance message, then release the button.
Was this review help?
4
5
Share
Georgia
08/16/25 9:20am
As a seasoned Volkswagen driver, I find resetting the maintenance reminder quite straightforward. Turn off the engine, sit in the driver's seat, locate the small button on the right side of the dashboard (usually the SET button), and hold it down firmly. Then turn the key to the ON position without starting the engine. Once the screen lights up, keep holding the button for about 10 seconds, and that annoying maintenance reminder should disappear. Remember, this reminder is your car's health alert – regular maintenance protects the engine and reduces fuel consumption. I recommend noting down the time after each reset to avoid missing actual oil or filter changes. Ignoring these warnings long-term may allow problems to accumulate, and you wouldn't want a breakdown during highway driving. Paying regular attention to these small things can significantly extend your vehicle's lifespan.
Was this review help?
10
0
Share
Expand All
CoraMarie
10/22/25 2:33am
I just successfully reset the maintenance reminder on my Volkswagen Lamando with a simple and practical method. After turning off the engine, firmly hold the reset button on the instrument panel (usually the right button), turn the ignition on to light up the dashboard, and keep pressing until the maintenance reminder flashes a few times and disappears. This method works universally on Volkswagen models, but always ensure the vehicle is stationary and safe during operation. The maintenance reminder is a thoughtful feature—don't just reset it without servicing. Change the oil when due, and a dirty air filter affects intake efficiency. Paying attention to reminders saves money in the long run, as delayed maintenance can lead to costly major repairs. Regular upkeep ensures reliability and reduces roadside breakdowns.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

What engine is used in the P8?

The P8 is equipped with a 2.0T in-line 4-cylinder turbocharged engine, with a maximum horsepower of 234ps, maximum power of 172kw, maximum torque of 360nm. It adopts a plug-in hybrid fuel system and direct injection fuel supply, paired with a 6-speed dual-clutch transmission. Taking the 2018 P8 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4760mm, width 1931mm, height 1655mm, wheelbase of 2950mm, minimum ground clearance of 180mm, fuel tank capacity of 45l, and curb weight of 2281kg.
14
4
Share

How to Turn Off the Rear Wiper of Volkswagen Touareg?

To turn off the rear wiper of the Volkswagen Touareg: 1. Locate the wiper switch on the lower right side of the steering wheel; 2. Push the wiper switch to the 'off' position. Taking the 2021 Volkswagen Touareg as an example, it is a mid-to-large-sized SUV with body dimensions of length 4878mm, width 1984mm, height 1717mm, and a wheelbase of 2899mm. The 2021 Volkswagen Touareg is equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 245PS, maximum torque of 370Nm, and maximum power of 180kW, paired with an 8-speed automatic transmission.
20
1
Share

How to Adjust the Rearview Mirror of a Sagitar?

The method to adjust the rearview mirror of a Sagitar is: 1. Rotate the button to the 'L' position, then move the button left or right to adjust the angle of the left rearview mirror; 2. Rotate the button to the 'R' position, then move the button left or right to adjust the angle of the right rearview mirror; 3. After adjustment, rotate the button back to the middle position. Types of rearview mirrors include: interior rearview mirror, exterior rearview mirror, and under-mirror. The function of the rearview mirror is to facilitate the driver's observation of the rear situation and prevent traffic accidents. Taking the 2021 Fashion Smart Connect Edition Sagitar as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, fuel tank capacity 50L, and trunk capacity 553L.
18
0
Share

What is the normal range for tire pressure monitoring?

The normal range for tire pressure monitoring is between 2.2 and 2.5 bar. Tire pressure refers to the air pressure inside the tire, and unstable tire pressure can reduce the tire's lifespan. Hazards of unstable tire pressure: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates uneven wear of the tread pattern in the center of the tire. The method to reset the tire pressure monitoring system is: 1. Ensure the vehicle's tire pressure is within the normal range; 2. Park the vehicle on a level surface and turn off the engine; 3. Power on the vehicle and hold down the tire pressure monitoring button; 4. After 5 seconds, a warning sound will be heard, and releasing the button indicates a successful reset.
14
2
Share

What is the method to check the engine oil level?

To check the engine oil level, follow these steps: 1. Park the vehicle on a level surface; 2. After parking for 10 minutes, pull out the dipstick; 3. Hold the dipstick perpendicular to the ground to check the oil level. The standard for adding engine oil is to maintain the oil level between the minimum and maximum marks on the dipstick. The effects of excessive engine oil are: 1. It creates unnecessary resistance to the crankshaft rotation, affecting power output; 2. Reduces engine power; 3. Worsens exhaust emissions and damages the catalytic converter; 4. Causes engine oil leaks. The effects of insufficient engine oil are: 1. Affects the overall lubrication of the engine; 2. Causes damage to internally lubricated components such as the camshaft, crankshaft, cylinder liners, and bearings.
11
1
Share

How to Read the Scale on a Torque Wrench?

To read the scale on a torque wrench, follow these steps: Align the pointer at the edge of the handle with the scale to directly read the value. The scale value where the handle is turned to represents the set torque value, which is measured in Newton meters (Nm) or kilogram-force meters (kgf·m). The unit is indicated on the dial. A torque wrench, also known as a torque spanner, moment wrench, or adjustable torque wrench, measures torque as the product of force and distance. It is essential for tightening screws and bolts to ensure they are securely fastened without damaging the threads due to excessive torque. Torque wrenches are categorized into: electric torque wrenches and manual torque wrenches, with the key feature being adjustable torque settings.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.