How to Reset the Maintenance Reminder on the Octavia?

Where are car airbags installed?

Car airbags are installed in the following locations: 1. Inside the middle position of the steering wheel; 2. Under the dashboard on the passenger side; 3. On the side of the seat; 4. Hidden inside the roof lining. The airbag is an auxiliary configuration for passive vehicle safety, consisting of an airbag sensor, an anti-collision airbag, and an electronic control device. It needs to be used in conjunction with seat belts to provide effective collision protection for occupants. Precautions for using airbags include: 1. Maintain an appropriate distance from the airbag when riding; 2. Do not place items in front of, above, or near the airbag; 3. Keep a certain distance between the driver's chest and the steering wheel; 4. Do not alter the airbag system or its surrounding layout without authorization.

20

5

Share

What kind of engine oil should a Volkswagen Jetta use?

Volkswagen Jetta should use 5W40 engine oil. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction in the engine, assist in cooling, provide sealing to prevent leaks, protect against rust and corrosion, and act as a shock absorber. Taking the 2019 Jetta VS5 as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4419 mm in length, 1841 mm in width, and 1616 mm in height, a wheelbase of 2630 mm, and a fuel tank capacity of 51 liters. The 2019 Jetta VS5 is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kW and a maximum torque of 250 Nm, paired with a 5-speed manual transmission.

3

0

Share

Why is the Elantra engine so loud?

The reasons for the loud engine noise in the Elantra are: 1. The engine oil does not meet the standard or too much is added, increasing the stirring resistance of the crankshaft connecting rod; 2. The viscosity of the engine oil is unsuitable; 3. Excessive engine carbon deposits, aggravating the wear of the cylinder and piston; 4. Mixing different brands of engine oil; 5. Not changing the engine oil on time. The Elantra is a compact 4-door 5-seater sedan with body dimensions of: length 4610 mm, width 1800 mm, height 1450 mm, and a wheelbase of 2700 mm. The Elantra is equipped with a 1.4T turbocharged engine, with a maximum power of 95.6 kW and a maximum torque of 211 Nm, paired with a 7-speed dual-clutch transmission.

14

1

Share

How to install the generator belt on Changan CS95?

The installation steps for the generator belt on Changan CS95 are: 1. Use a wrench to loosen the support nut of the generator; 2. After loosening the track screw, push the generator towards the engine; 3. Replace the belt and push the generator back; 4. Use a pry bar to tighten the generator; 5. Tighten the track screw, then tighten the support bracket nut. The Changan CS95 is a 5-door, 7-seat mid-to-large SUV with body dimensions of: length 4949mm, width 1930mm, height 1790mm, wheelbase 2810mm, fuel tank capacity 74L, and curb weight 2007kg.

6

4

Share

Should the clutch be released after shifting to first gear when pulling over?

Do not release the clutch after shifting to first gear when pulling over. The precautions for Subject 3 are as follows: 1. Before getting in the car for the test: Before getting in the car for the test, walk around the vehicle counterclockwise to check the vehicle condition. This is a very crucial step and should not be overlooked. 2. After getting in the car: After getting in the car, adjust the seat position, adjust the angle of the rearview mirror, and fasten the seat belt. Only after completing these steps can the test begin. 3. Voice instructions: During all test items, listen to the voice prompts and do not act before the voice prompt, as the computer will not record the operation, resulting in test failure. Special attention should be paid to the school and bus stop projects, where there are no voice reminders. Be sure to perform the deceleration and braking actions within 30 meters, and avoid braking too early.

3

2

Share

Can the engine be washed with a water gun?

Engine can be washed with a water gun. It is better not to use a water gun to wash the engine in the following situations: 1. Hot engine state: According to the principle of thermal expansion and contraction, using cold water high-pressure washing when the engine is hot will cause the engine temperature to drop sharply, which may cause oil seal leakage, and in severe cases, cylinder block rupture may occur. 2. Older cars: When cleaning the engine compartment of a new car, a high-pressure water gun can be used, but for cars that have been used for too long, although the engine compartment is insulated, there is no guarantee that it will not cause a short circuit. It is best to ask the 4S shop master to blow it with an air gun during maintenance.

17

3

Share

How to Reset the Maintenance Reminder on the Octavia?

Where are car airbags installed?

What kind of engine oil should a Volkswagen Jetta use?

Why is the Elantra engine so loud?

How to install the generator belt on Changan CS95?

Should the clutch be released after shifting to first gear when pulling over?

Can the engine be washed with a water gun?

How Long is the Warranty Period for Dongfeng Nissan?

How to Set the Steering Angle Sensor?

What are the methods for repairing car glass scratches?

How many kilometers should an automatic transmission car change the transmission oil?