How to Reset the Maintenance Reminder on the Lynk & Co 03?

What does ECO mean in cars?

ECO is the fuel-saving mode in cars. Here are the relevant details: How the fuel-saving mode works: It analyzes various factors affecting fuel consumption, such as transmission gear position, engine speed, braking system, etc., through multiple sensors. The ECU then calculates the optimal fuel injection quantity for the engine operation. When ECO mode is activated, it comprehensively evaluates and analyzes conditions influencing fuel consumption, including automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel quantity to supply the engine, effectively reducing fuel consumption compared to normal driving mode. Advantages of the fuel-saving mode: It enhances the vehicle's fuel efficiency, with particularly noticeable effects on high-displacement cars. For family cars used in daily life, fuel consumption performance is also a key consideration.

19

5

Share

How Many Years Are Cars Allowed to Operate?

For non-commercial passenger cars, the previous mandatory scrapping age limit was 15 years. However, this did not align well with the actual usage patterns of motor vehicles in China. Therefore, the country introduced new regulations for private vehicle scrapping, eliminating the mandatory scrapping age limit and replacing it with a mileage-based standard of 600,000 kilometers for mandatory scrapping. Based on an average annual mileage of 20,000 kilometers, car owners can theoretically drive their vehicles for up to 20 years. Although the age limit has been abolished, this does not mean that any vehicle can actually reach 600,000 kilometers. The new policy has implemented stricter standards for vehicle usage: Under the new regulations, private vehicles must undergo two annual inspections per year starting from the 15th year after initial registration. For vehicles over 20 years old, four periodic inspections per year are required starting from the 21st year. If a vehicle fails to pass these inspections, it must be declared scrapped. The annual inspection process imposes stringent requirements on older vehicles. During the power performance test for private vehicles, the chassis output power must not be lower than 60% of the engine's rated power or 65% of its maximum net power. Additionally, the new standards stipulate that vehicles failing safety or environmental protection requirements during an inspection cycle will be mandatorily scrapped. The power performance test will replace the current fuel consumption test to phase out vehicles with poor performance indicators. According to the "Mandatory Motor Vehicle Scrapping Standards," any vehicle that fails to obtain a passing inspection mark for three consecutive inspection cycles after its inspection validity period expires shall be mandatorily scrapped.

18

2

Share

How to charge the Tayron GTE?

The Tayron GTE is a hybrid new energy vehicle. When driving on the highway, you can activate the charging mode, utilizing the engine's excess kinetic energy to charge the battery. It is also equipped with functions like coasting energy recovery, enabling the battery to be quickly recharged. Below are the relevant details: Driving Modes: The Tayron GTE features five driving modes, including pure electric mode, hybrid mode, battery hold mode, charging mode, and GTE mode. Detailed Analysis: For daily commuting and short-distance trips, it is recommended to select the pure electric mode. The hybrid mode simplifies operation, making it ideal for novice drivers, as it automatically allocates the workload between the electric motor and the engine. The charging mode can be activated on highways, while the battery hold mode is suitable for congested road sections. The GTE mode is a sport mode that unleashes the potential of both the engine and the electric motor, delivering greater torque output. The Tayron GTE's battery system adheres to development standards significantly higher than national requirements, ensuring a higher safety coefficient.

12

2

Share

How to Remove Cigarette Smell from a Car?

You can use fruits, an air purifier, or activated charcoal bags. Fruits like apples, pineapples, and oranges can absorb unpleasant odors while emitting natural fragrances to freshen the air. Using an air purifier helps eliminate odors inside the car, ensuring the driver breathes clean air, stays alert, and reacts quickly. Placing activated charcoal bags in the car is another effective method. Activated charcoal is a black, porous solid carbon processed through activation, known for its strong adsorption properties. It effectively absorbs cigarette smoke inside the car.

8

3

Share

What are the techniques for finding 30 centimeters during hill start?

Here are the detailed techniques for finding 30 centimeters during hill start: Observe the position of the engine hood: After hearing the voice prompt, you need to drive forward and stay to the right. When you see the right front corner of the engine hood (about 1/3 of its length) align with the roadside line, the distance between the car body and the roadside line is exactly 30 centimeters. Look at the raised part of the wiper: From the driver's seat, when the raised part of the wiper aligns with the right roadside line, the distance is approximately 30 centimeters. Check the right front door handle: Observe the right front door handle in the right rearview mirror. If the right front door handle is tangent to the right roadside line, the distance is just right. If it's too far, you need to adjust the direction slightly; if it's too close, there's a risk of crossing the line.

18

0

Share

Why Does Fuel Consumption Increase After Maintenance?

The reasons for increased fuel consumption after maintenance include higher oil viscosity and replacement of brake pads. Detailed explanations are as follows: Higher Oil Viscosity: Excluding the use of different oil, even with the same oil, newly replaced oil will have higher viscosity compared to oil that has been used for 10,000 kilometers. This naturally creates greater resistance, leading to higher fuel consumption under the same road conditions and driving habits. This situation usually diminishes after a few hundred kilometers of driving. Replacement of Brake Pads: After installing new brake pads, the friction gap is relatively smaller, resulting in greater resistance during braking, which can slightly increase fuel consumption. This issue resolves after the brake pads' break-in period. Slightly Overfilled Oil: Excessive oil increases the energy required for the crankshaft to rotate, thereby adding to the engine's load and naturally increasing fuel consumption.

10

3

Share

How to Reset the Maintenance Reminder on the Lynk & Co 03?

What does ECO mean in cars?

How Many Years Are Cars Allowed to Operate?

How to charge the Tayron GTE?

How to Remove Cigarette Smell from a Car?

What are the techniques for finding 30 centimeters during hill start?

Why Does Fuel Consumption Increase After Maintenance?

What are the steps for replacing the clutch plates in a dry dual-clutch transmission?

How many people's licenses can be used for one traffic violation handling?

Is Fuel System Cleaning Necessary?

What is the lifespan of an MT transmission?