How to Reset the Maintenance Reminder on Lavida?

1 Answers
RebeccaFitz
07/30/25 5:06am
Steps to reset the maintenance reminder on Lavida: 1. Turn off the ignition switch. 2. Press and hold the "0.0" button on the instrument panel. 3. Turn on the ignition switch while keeping the "0.0" button pressed. 4. Release the "0.0" button when the maintenance light on the instrument panel display resets. Below is an introduction to vehicle maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 2. The purpose of car maintenance: to keep the car clean and in good technical condition, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
Was this review help?
7
5
Share
More Forum Discussions

Is the Chevrolet Logo Black?

The Chevrolet logo is mostly yellow, with the exception of the Cruze, which features a black logo. Other black logos are typically the result of owners applying black film wraps. The Cruze's black logo is a black bowtie, symbolizing elegance, grace, and sophistication. The Cruze model incorporates classic design elements from Chevrolet's Redline series, featuring the brand's signature black bowtie logo on both the front and rear. Key design elements such as the grille, side mirrors, wheels, and spoiler also adopt the Redline styling. Below is an introduction to the Cruze: 1. Interior: The Cruze follows Chevrolet's classic winged dual-cockpit design, enhanced with 3D tailoring craftsmanship. The dashboard features a wraparound structure that extends horizontally to the door panels, along with an 8-inch HD touchscreen, piano black finish panels, extensive soft-touch materials, and a floating central armrest. 2. The Cruze MONZA is equipped with SAIC-GM's next-generation Ecotec dual-injection turbocharged engine, fully compliant with China's National VI emission standards. The 320T variant delivers a maximum power of 92 kW and a peak torque of 170 N·m, paired with either a 6-speed DCG intelligent dual-clutch transmission or a 6-speed enhanced manual transmission, achieving a combined fuel consumption as low as 5.2L per 100 km.
11
0
Share

Which engine oil is best for Changan CS55?

For the Changan CS55, Shell HX7 5w-40 synthetic engine oil is recommended, with an oil capacity of approximately 4 liters. Here is some relevant information: 1. Engine oil, also known as engine lubricant, has a density of about 0.91×10³ (kg/m³). It serves multiple functions such as lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the "blood" of a car. 2. Gasoline engine oils are divided into two types: mineral oil and synthetic oil. Synthetic oils are further categorized into semi-synthetic and full-synthetic oils. 3. Engine oil consists of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the shortcomings of the base oil, providing new characteristics. It is a crucial part of lubricating oil. The engine is the heart of a car, containing many metal parts that move against each other at high speeds, in harsh environments, and under high temperatures.
16
5
Share

How often should the transmission fluid be changed in a Hyundai Elantra?

For the Hyundai Elantra, manual transmission fluid should be changed every 2 years or 60,000 kilometers, while automatic transmission fluid generally does not require replacement. The benefits of regular transmission fluid changes are as follows: 1. Ensures smooth and seamless gear shifting, improving driving performance. 2. Provides excellent oxidation resistance, reducing rust on mechanical parts. 3. Contains high-quality extreme pressure additives, offering superior protection for gear sets. 4. Delivers optimal anti-wear performance, extending the lifespan of the automatic transmission. Note: When changing the fluid, it is essential to use the transmission fluid specified by the manufacturer. The transmission is a precision electro-hydraulic control device, and different transmissions have varying internal structures, friction coefficients, etc. Therefore, automatic transmission fluids differ and should not be mixed.
9
5
Share

How to Replace the Battery in a DS6 Key?

The method for replacing the battery in a DS6 key is as follows: 1. First, press the button on the electronic key to remove the mechanical key; 2. Insert a screwdriver into the small notch at the top covered by the mechanical key and gently pry it upwards, at which point the electronic key will separate; 3. Now you can see the battery. Pry out the old battery and replace it with a new one. Be careful not to reverse the positive and negative poles; 4. Snap the two parts back together, press the edges, and the clips will return to their original position. 5. Insert the mechanical key back into the electronic key to lock it. The battery replacement is now complete.
19
2
Share

Is the Highlander better in 2WD or 4WD?

The differences between the Highlander 2WD and 4WD are: 1. Drive system: 4WD means all four wheels have power, while 2WD only has two wheels with power; 2. Price: 4WD is more expensive than 2WD; 3. Displacement: 2WD has a 2.7L engine, while 4WD has a 3.5L engine; 4. Road stability: The 4WD Highlander performs better on rough roads compared to the 2WD version; 5. Fuel consumption: The new Highlander 2.0T's on-demand 4WD consumes slightly more fuel than the 2WD version, but the difference in fuel consumption per 100 kilometers does not exceed 1 liter.
4
3
Share

What is the tire pressure for Jetta VS5?

The normal tire pressure range for the Jetta VS5 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The tire pressure monitoring system of the Jetta VS5 can be viewed on the central control screen. The vehicle comes equipped with a tire pressure monitoring system that provides automatic alarm alerts without manual operation. This tire pressure monitoring system uses ABS wheel speed sensors to compare the rotational speed differences between tires to determine if there is abnormal tire pressure, issuing immediate alerts if any abnormalities are detected. The module is integrated into the ABS pump. Generally, tire pressure above 2.8 bar is considered too high, and tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. Typically, the system will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, the tire pressure warning light will illuminate. For sensor damage issues, the only solution is to replace the sensor with a new one.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.