How to reset the maintenance reminder on Haval H6?

[StEden]

The method to reset the maintenance reminder on Haval H6 is: 1. Turn off the ignition, press and hold the button at the lower right corner of the instrument panel; 2. Turn the ignition to the position where all dashboard lights are on, release the button after the wrench symbol on the dashboard stops flashing; 3. Press the button at the lower left corner of the instrument panel, and the wrench symbol will disappear, indicating the maintenance reminder has been reset. The original purpose of the maintenance reminder light is to prompt the owner to perform maintenance as soon as possible. Therefore, the owner should promptly go to a 4S shop for maintenance. After the maintenance is completed, the 4S shop will use a diagnostic tool to reset the maintenance reminder light. The fastest and most accurate method to reset the maintenance reminder light is to use a diagnostic tool, which most car owners do not have. It is recommended that owners reset the reminder light after maintenance at a 4S shop or visit a 4S shop to have it reset.

[SiennaFitz]

After each maintenance of my Haval H6, I have to manually reset this reminder light. I figured out a method myself: Don't start the engine first, hold down the OK button on the left side of the steering wheel without releasing, and simultaneously press the start button twice to power up the instrument panel. Wait for about ten seconds until you see the maintenance reminder flashing, then release. Usually, this can reset it. However, pay attention to the differences in model years; older models might be easier to operate. If you really can't manage it, just go to the 4S店 and let the technician help you out in two minutes—don't overthink it. Last time when I tried it myself, I also checked the oil dipstick to make sure the car's condition was fine.

[DiKyle]

I often help friends with resetting maintenance reminders. For the Haval H6, there are mainly two methods. For newer models, simply operate through the dashboard menu: power on by pressing the start button without starting the engine, use the steering wheel buttons to navigate to the maintenance option in settings, then select reset. Older models are even simpler—just hold the OK button for three seconds while powering on. The key is to identify your vehicle's configuration correctly. Last year when helping my cousin, I noticed his 2019 model had a different menu location compared to the 2023 version. After completing the reset, it's good to check the vehicle status information, where you might also see the recommended mileage for the next maintenance.

[DelBryce]

The service reminder light has been on since my last maintenance. I tried to reset it myself by following these steps: park the car, press the start button to power on without starting the engine, navigate to the maintenance page using the buttons on the left side of the steering wheel, and then long-press the OK button to reset. However, it's best to confirm that the maintenance has just been completed before resetting to avoid missing an actual service interval. If you can't remember the steps, just place your phone on the holder and search for video tutorials—there are plenty of Haval H6 operation demos online these days. If it feels too troublesome, next time after maintenance, simply ask the technician to set it up for you before driving away.