How to Reset the Maintenance Reminder on Golf 7?

1 Answers
JanelleLynn
07/29/25 1:42am
The method to reset the maintenance reminder on Golf 7 is: 1. Turn off the ignition switch and then turn it back on; 2. Press and hold the odometer hour reset button simultaneously until the reminder message disappears. Taking the 2021 Golf 200t as an example, it is a compact 5-door, 5-seat hatchback with body dimensions of 4296mm in length, 1788mm in width, and 1471mm in height, with a wheelbase of 2636mm. The 2021 Golf 200t is equipped with a 1.2T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 85 kW and a maximum torque of 200 Nm. It features front-wheel drive, with a front suspension using a MacPherson strut independent suspension and a rear suspension employing a torsion beam non-independent suspension.
Was this review help?
20
3
Share
More Forum Discussions

Does the car head sweeping the line in the reverse parking of Subject 2 result in penalty points?

In the reverse parking of Subject 2, if the car head sweeps the line, 100 points will be deducted, resulting in failure of the current test. Other actions that also lead to a 100-point deduction include the vehicle body crossing the line, failing to enter the parking space, stopping midway, not following the prescribed route, not driving in the correct sequence, and exceeding the specified time limit. Subject 2 has a full score of 100 points, with evaluation criteria set for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The rules for the Subject 2 driving license test state that any mid-test stopping, rolling back, or not following voice prompts will result in failure. Additionally, if the wheels or body cross the line, the test will be deemed a failure. Many students encounter line-crossing issues during Subject 2 training, with "crossing the line" being the most common reason for failure. The primary cause of wheel line-crossing is students not mastering the correct timing for steering. Besides missing the steering timing, another reason could be the steering speed not matching the vehicle speed. Subject 2 penalty standards: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using turn signals (including starting, changing lanes, overtaking, turning, and parking by the roadside); turn signals not used for more than three seconds (this is easily overlooked!); forgetting to turn off turn signals or using them incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse parking: Not following the prescribed route sequence: 100-point deduction. Vehicle body crossing the line: 100-point deduction. Failing to complete the parking: 100-point deduction. Before reversing, if both front wheels do not pass the control line: 100-point deduction. Exceeding the 210-second time limit for the task: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Slope parking and starting: After stopping, if the front bumper is not aligned with the pole line and exceeds 30 cm front or back: 100-point deduction. After stopping, if the front bumper is not aligned with the pole line but does not exceed 30 cm front or back: 10-point deduction. After stopping, if the starting time exceeds 30 seconds: 100-point deduction. Wheels touching the road edge line while driving: 100-point deduction. During starting, if the vehicle rolls back more than 30 cm: 100-point deduction. After stopping, if the vehicle body is more than 30 cm from the road edge line: 100-point deduction. After parking, if the parking brake is not fully engaged: 10-point deduction per occurrence. Parallel parking: After parking, if the vehicle body crosses the line: 100-point deduction. Not using or incorrectly using turn signals when exiting: 10-point deduction. Exceeding the 90-second time limit for the task: 100-point deduction. Touching the parking space boundary line while driving: 10-point deduction per occurrence. Wheels touching the lane boundary line while driving: 10-point deduction per occurrence. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. 90-degree turn: Wheels touching the road edge line: 100-point deduction. Not using or incorrectly using turn signals during the turn, or not turning them off after the turn: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Curve driving: Wheels touching the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Driving without the gear in second or higher: 5-point deduction.
6
4
Share

What brand are the tires on the 10th-generation Civic?

With a brand-new turbocharged direct injection engine delivering 130kW of powerful performance and an ultra-low fuel consumption of 5.4L/100km, the 10th-generation Civic makes a grand entrance as the ultimate dynamic driving machine. Depending on the trim level, the 10th-generation Civic is equipped with Yokohama tires in R16/R17 sizes. Below is more information about the tires: 1. For safe vehicle operation, tires must be of the appropriate type and size, with clear and well-maintained tread patterns, and correctly inflated. 2. Tire lifespan depends on various factors, including driving habits, road conditions, vehicle load, inflation pressure, maintenance records, speed, and environmental conditions (even when the tires are not in use). 3. In addition to regular inspections and inflation pressure maintenance, it is recommended to have tires inspected once they have been in use for five years. After 10 years of manufacture, regardless of the tire's condition or wear level, all tires, including the spare, should be removed and no longer used. 4. The wear indicator grooves are 1.6mm shallower than the rest of the tire tread. If the tread wears down to expose these indicators, the tire should be replaced. On wet or slippery roads, severely worn tires exhibit significantly reduced traction.
11
3
Share

Where is the radiator of Geely Emgrand located?

Geely Emgrand's radiator refers to the water tank, which is located below the cooling fan. Open the engine hood, and the place with red coolant is the water reservoir. Follow the pipes from the reservoir to find the water tank. The radiator is part of the car's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, the outlet chamber, the main plate, and the radiator core. The maintenance methods for the car water tank are as follows: 1. Park the vehicle and turn off the engine. After the coolant temperature drops, open the expansion tank and add radiator cleaner. 2. Start the engine and let it idle for 5-10 minutes after the cooling fan starts working. 3. Turn off the engine and remove the front bumper of the vehicle. When disassembling, make sure all fixing screws are loosened, and then slowly remove from both ends to the middle. Be careful not to break the fixing clips. 4. After ensuring the coolant temperature has completely cooled, drain the radiator cleaner along with the coolant, and finally replace it with new engine coolant.
15
4
Share

What suspension does the Kia KX7 use?

The Kia KX7 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The MacPherson independent suspension features only one L-shaped control arm. The multi-link independent suspension is an improved version based on the double-wishbone independent suspension, where the two wishbones are replaced with separate links. The multi-link independent suspension enhances the wheel's ground contact performance, thereby improving traction, which in turn enhances the vehicle's handling. It also improves ride comfort. Here are some details about the Kia KX7: 1. The Kia KX7 is equipped with three engines: a 2.0-liter naturally aspirated engine, a 2.0-liter turbocharged engine, and a 2.4-liter naturally aspirated engine. 2. The Kia KX7 offers strong power, a good driving experience, and high cost performance. 3. The Kia KX7 has a spacious interior, with dimensions of 4730 mm in length, 1890 mm in width, 1730 mm in height, and a wheelbase of 2700 mm.
16
2
Share

Where is the air conditioning filter of the new Santana located?

Santana's air conditioning filter is located under the glove box. Although it is simple to replace, the position is not very comfortable. You need to adjust the front passenger seat to the rearmost position for operation. At the lower left of the glove box, look up to find a flip cover secured by three clips. This is where the air conditioning filter is installed. After opening all three clips, you can see the air conditioning filter. Here are some tips for removing the air conditioning filter: 1. When replacing the air conditioning filter, pay attention to the arrow indication on the filter. During installation, align it with the direction indicated by the arrow. Do not install it in reverse, as the filter will not function properly if installed incorrectly. 2. There are two types of air conditioning filters on the market: one with activated carbon and one without. Generally, cars use the activated carbon filter. Although its service life is relatively short, the activated carbon filter provides better air filtration quality. 3. The recommended replacement interval for the air conditioning filter in the Volkswagen New Santana is one year or 20,000 kilometers. If the car is in an area with poor air quality, it is recommended to replace the air filter in advance to ensure the car interior always has fresh air.
13
0
Share

How to adjust the time on the Skoda Octavia dashboard?

Locate the knob on the dashboard and press it for 2 seconds. At this point, the short-trip mileage will reset. Rotate the knob left or right. When the clock icon is flashing, you can adjust the time. There may be some error when adjusting the car's time, so make adjustments based on the actual error. When approaching the precise value to be adjusted, make slow adjustments. Below is an introduction to the Skoda Octavia: 1. The Skoda Octavia is a compact sedan launched by Skoda. The Octavia is built on Volkswagen's globally leading PQ35 platform, and it is the first sedan launched by SAIC Skoda. This model is an advanced vehicle synchronized with Europe. 2. Skoda has a century of automotive manufacturing technology and experience. This car is designed based on the needs of domestic consumers, with extensive localization and user-friendly design improvements. After its launch, it quickly became one of the most competitive models in the domestic high-end sedan segment. 3. The front face of the Skoda Octavia features a split-type grille design, which enhances the car's sporty feel compared to the older models. The rear of the car includes chrome trim, elevating the overall design of the vehicle.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.