How to Reset the Maintenance Reminder on Ford Kuga?

1 Answers
LeGraham
09/04/25 6:57am
To reset the maintenance reminder on the Ford Kuga, follow these steps: 1. Close all doors and windows. 2. Turn the ignition switch to the "2" position. 3. Simultaneously press and hold the accelerator and brake pedals for approximately 3 seconds. 4. After 25 seconds, "complete" will appear, indicating that the maintenance light has been successfully reset. Additional information about the Ford Kuga: 1. The Kuga is an SUV under the Ford brand, featuring a luxurious and stylish exterior, a highly modern interior, and numerous high-tech configurations leading its class. 2. The Kuga continues Ford's excellent family design, perfectly crafting a dynamic and powerful yet elegant image, showcasing a robust overall demeanor.
Was this review help?
16
2
Share
More Forum Discussions

What are the reasons for the ABS warning light in a vehicle to illuminate?

Vehicle ABS warning light illuminates due to: 1. ABS wheel speed sensor malfunction. The wheel speed sensor, located on the wheels, is easily contaminated by dirt or mud. A sensor covered with excessive dirt can affect the transmission of speed signals, triggering the ABS warning; 2. ABS wiring connection issues. Loose connections in the wheel speed sensor wiring are common and should be prioritized for inspection; 3. ABS control unit programming problems. It is likely that the data within the control unit is mismatched or incorrect, requiring data readjustment; 4. The illumination of the ABS light indicates a fault in the ABS system, causing it to cease operation. This means the vehicle operates as if it lacks an ABS system, leading to reduced braking effectiveness. Therefore, when the ABS light comes on, the fault should be promptly addressed.
17
4
Share

What Causes the Squeaking Sound During Cold Start?

The reasons for the squeaking sound during cold start are: 1. Aging of the generator belt, which is made of rubber. Affected by thermal expansion and contraction, the belt contracts when cold. Combined with daily stretching from rotation, this can cause belt slippage during cold starts, producing noise; 2. Issues with the valve tappet. During cold starts, engine oil is pressurized from the oil pump through the engine oil passages to reach the valve tappet, which can amplify the startup sound; 3. Lack of lubrication in the starter motor's internal gears, causing sticking and affecting timely gear retraction; 4. Malfunction of the carbon brushes inside the starter motor.
9
1
Share

What are the Toyota SUV models?

Toyota SUV models include: Wildlander, Highlander, Izoa, Prado, Land Cruiser, etc. Taking the 2020 Toyota Wildlander 2WD Leading Edition as an example, it is a compact 5-door 5-seat SUV with body dimensions of: length 4665mm, width 1855mm, height 1680mm, and a wheelbase of 2690mm. The 2020 Toyota Wildlander 2WD Leading Edition is equipped with a 2.0L naturally aspirated engine, with a maximum power of 126kw and a maximum torque of 209nm, matched with a continuously variable transmission. Its drive mode is front-wheel drive, the front suspension uses a MacPherson independent suspension, and the rear suspension uses an E-type multi-link independent suspension.
2
1
Share

What are the differences between the Accord 8.5 generation and the 8th generation?

The differences between the Accord 8.5 generation and the 8th generation are: 1. Different engines: The Accord 8.5 generation is equipped with a 2.4L iVTEC engine and a 2.0L iVTEC engine; the 8th generation is equipped with a 2.0L iVTEC engine. 2. Different front-end appearance: The Accord 8.5 generation features a hollow double-column design below the front emblem; the 8th generation features a hollow double-row grille design below the front emblem. The Accord is a B-segment car launched by GAC Honda, with body dimensions of 4930 mm in length, 1845 mm in width, and 1470 mm in height, a wheelbase of 2775 mm, and a fuel tank capacity of 65 liters.
2
5
Share

What car has a bull as its emblem?

The car with a bull as its emblem is Lamborghini. Its models include the Huracan, Aventador, Urus, Gallardo, and Reventon. Taking the 2019 Aventador SVJ as an example, its body dimensions are: length 4943 mm, width 2098 mm, height 1136 mm, with a wheelbase of 2700 mm. The 2019 Aventador SVJ is equipped with a 6.5L naturally aspirated engine, delivering a maximum horsepower of 770 hp, a maximum power of 566 kW, and a maximum power speed of 8500 rpm.
17
1
Share

What to Do When the Car Paint Gets Scratched?

Here are the steps to deal with minor paint scratches on a car: 1. Clean the scratched area thoroughly; 2. Soak sandpaper in water and wrap it around a hard cotton block; 3. Sand the scratched area smooth with the sandpaper; 4. Prepare masking tape and a cloth to cover areas not requiring touch-up; 5. Combine the touch-up pen with the mini spray can; 6. Spray the paint from a certain distance from the scratch; 7. Apply blending clear coat to the touched-up area and let it dry. Methods for maintaining car paint include: 1. Remove dust from the car body promptly before use; 2. Rinse the car immediately after rain; 3. Avoid washing the car under direct sunlight; 4. Use dedicated neutral running water for car washing; 5. Wipe gently in the direction of water flow, from top to bottom; 6. Remove contaminants like tar and bird droppings promptly; 7. Avoid frequent paint polishing.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.