How to reset the maintenance reminder on Changan CS35?
2 Answers
The method to cancel the maintenance reminder on Changan CS35: 1. Press and hold the reset button on the instrument panel, then press and hold the short-distance counter reset button below the tachometer. 2. Turn on the ignition switch, set it to the ON position, release the short-distance counter reset button, and the SERVICE indicator will appear on the display. 3. Release the reset button on the instrument panel to reset the reminder message. 4. Rotate the reset button clockwise once, pull out the minute button on the clock, and turn the minute button to the right. The mileage will be displayed on the screen. 5. Turn off the ignition and turn it back on to the ON position. The SERVICE indicator will disappear.
I've been driving Changan cars for seven or eight years, and I've really studied this matter of resetting the CS35 maintenance reminder. First, completely turn off and power down the car, then sit in the driver's seat and hold down the TRIP button on the dashboard without letting go. With your right hand, turn the key to the ON position but don't start the engine. At this point, the wrench icon on the dashboard will start flashing. Keep holding the button for seven or eight seconds until the wrench icon disappears. Release the button and then turn off the key. The whole process takes less than half a minute. If the battery voltage is insufficient, it might fail, so it's recommended to start the engine before attempting this for better stability. For newer models with a central control screen, you might need to find the reset option in the vehicle settings menu. For older models with mechanical dashboards, this method is definitely correct. If you really can't figure it out, just visit a 4S shop—they can get it done in minutes with their computer.
