How to Reset the Maintenance Reminder on a Lavida?

1 Answers
DeMargaret
07/24/25 11:35pm
The method to reset the maintenance reminder on a Lavida is: 1. Remove the key to turn off the dashboard lights; 2. Press and hold the maintenance reset button; 3. Turn on the key and wait until the maintenance cycle indicator displays normally; 4. Turn off the key and then turn it on again to test if the reset is successful. If not, repeat the above steps. Taking the 2011 Lavida 1.4TSI Manual Elegance Edition as an example: the vehicle has a length of 4605mm, width of 1765mm, height of 1460mm, a wheelbase of 2610mm, braking system with front ventilated discs and rear discs, equipped with a 1.4-liter engine and a 5-speed manual transmission, front-wheel drive, and a maximum torque of 220 Nm.
Was this review help?
17
4
Share
More Forum Discussions

How many points will be deducted for not yielding to a school bus according to traffic regulations?

Not yielding to a school bus will result in a deduction of 6 points. Some regulations regarding the deduction of driving license points: 1. Violations resulting in a 12-point deduction: (1) Driving a motor vehicle that does not match the permitted vehicle type; (2) Driving a motor vehicle under the influence of alcohol; (3) Driving a commercial passenger vehicle (excluding buses) or a school bus carrying more than 20% of the approved passenger capacity, etc. 2. Violations resulting in a 6-point deduction: (1) Driving a motor vehicle in violation of traffic signal lights; (2) Driving a commercial passenger vehicle (excluding buses) or a school bus carrying more than the approved passenger capacity but less than 20%, or driving other passenger vehicles carrying more than 20% of the approved passenger capacity, etc.
4
4
Share

How to Remove Maintenance Reminder for Volkswagen?

First, turn off the car's ignition. Then, press and hold the 0.0/SET button on the right side of the dashboard with your left hand. While pressing the "SET" button, turn on the ignition. Release the "SET" button and press it once more. Finally, turn off the ignition and then turn it back on to complete the maintenance reminder reset. Below is more information about maintenance: 1. Maintenance intervals: The first service is at 5,000 km; the second service is when the vehicle reaches 10,000 km, followed by maintenance every 10,000 km. 2. Precautions: Keep the audio system dry, clean the car promptly after rain, maintain the chassis, remove water from brakes, care for the wipers, and use the air conditioner regularly.
20
5
Share

What does it mean when there are two creaking sounds when opening the door?

When a car door makes two abnormal sounds upon opening, it is due to damage to the door limiter, which can be replaced for free during the warranty period. Information about the door limiter is as follows: 1. Limiter: A safety device that protects the machine, also known as an overload limiter. 2. Function: It can limit the maximum opening angle of the door and keep the door in an open position. Additional information: 1. Rubber spring-type limiter: This type of limiter has a simple structure, low cost, requires no maintenance, and occupies little space. The downside is the high material requirements; if the chain strength is insufficient, the door may sag after some time, leading to abnormal sounds. Rubber spring-type limiters are mostly divided into two or three stages, with a length of about 60mm and a maximum opening angle below 70 degrees. 2. Torsion spring-type limiter: Commonly used in Europe, this type of limiter features low noise, long lifespan, and effective limiting, but it occupies more space, has a complex structure, and is difficult to repair. The maximum opening angle of a torsion spring-type limiter is between 60 and 65 degrees, with a maximum opening torque of 45 N/m and a maximum closing torque of 50 N/m.
10
0
Share

How long does it take to get a license plate for Tangeche?

The time required varies depending on the region, generally taking 5-10 working days. The vehicle pickup time for Tangeche typically takes 15 to 25 working days. Below is detailed information about Tangeche: 1. Overview: Tangeche was officially launched by Souche on November 15, 2016. It is a car financing lease service brand under Souche, connecting multiple entities such as car manufacturers, car dealers, logistics service providers, insurance, and after-sales services. 2. Others: Tangeche has certain drawbacks. For example, the price is higher than that of ordinary 4S stores, and additional service fees may be charged. The vehicle initially belongs to Tangeche and only later to the purchaser.
13
5
Share

Can a Battery-Powered Vehicle Without a Trunk Have One Installed?

Electric vehicles are a popular mode of transportation for many people, known for their lightweight and flexibility. It is possible to install a trunk on a battery-powered vehicle that does not have one. However, there are important considerations: 1. Purchase Genuine Products: Always buy authentic products when installing a trunk. 2. Installation: Ensure the trunk is securely installed. Below is some information about battery-powered vehicles: 1. Battery-Powered Vehicles: Also known as "electric vehicles," they are purely motor-driven vehicles powered by batteries (storage batteries) and driven by motors (DC, AC, series-wound, or separately excited). 2. Uses: Primarily used for sightseeing and passenger transport, security patrols, and cargo transportation. The main applications of electric sightseeing vehicles are in parks, scenic areas, leisure resorts, universities, hospitals, golf courses, real estate companies, and other locations for passenger transport.
12
5
Share

What are the causes of idle shaking in a new car?

New car idle shaking may be caused by the following reasons: 1. Engine carbon deposits: Excessive carbon deposits inside the engine can cause idle shaking after a cold start. Due to excessive carbon deposits, a large amount of gas sprayed by the engine will be absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture, which makes starting difficult and causes shaking. 2. Ignition system issues: Poor performance of the ignition system or suboptimal spark plug firing can lead to idle shaking in a new car. 3. Unstable fuel pressure: Abnormal fuel pump supply pressure or incorrect readings and poor performance of the intake pressure sensor can cause body shaking. It is recommended to check the fuel supply pressure and intake pressure sensor at a 4S shop to ensure they are functioning properly.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.