How to Reset the Maintenance Reminder on a Golf?

3 Answers
StLeo
07/25/25 9:02am
Method to reset the maintenance reminder on a Golf: 1. With the engine turned off, press and hold the trip odometer reset button located below the tachometer; 2. Turn the ignition to the ON position, then release the trip odometer reset button. The display will show "SERVICE"; 3. Pull out the minute button on the clock and turn it to the right. The odometer reading will appear on the display; 4. Turn off the engine to reset the reminder message; 5. Turn the ignition to the ON position again, and the "SERVICE" indicator will disappear. The Golf's body dimensions are 4296mm in length, 1788mm in width, and 1471mm in height.
Was this review help?
6
4
Share
SanEva
08/11/25 2:02pm
Yesterday I just cleared the maintenance reminder for our Golf, and actually the method is quite simple. Don't start the engine, just turn the key to the ACC position to light up the dashboard. Then use the multifunction buttons on the right side of the steering wheel to navigate to the maintenance menu page. For some models, you need to press and hold the OK button or the reset button for a few seconds for it to take effect. I've encountered this a few times; when the indicator light flashes, I lose patience waiting, and manually resetting it immediately feels much better. Also, a little tip: when the maintenance reminder appears, it means it's time to change the oil, filter, etc. Developing a habit of checking every 5,000 kilometers or so can save a lot of hassle, and the engine will last longer. Doing it yourself saves money by avoiding trips to the repair shop.
Was this review help?
15
4
Share
Expand All
MackenzieLee
09/27/25 7:21am
I often do the maintenance reminder reset. After driving a Golf for five years, I can do it blindfolded. Don't start the engine, just turn the key to the power-on position. When the dashboard lights up, check the button combination based on your model. Older models without touchscreens may require holding down a small button on the dashboard side until the reminder disappears. For newer models with digital displays, just navigate to the menu settings and select the reset option. After resetting, don't forget to set the next maintenance interval - the system defaults to reminding you about critical component servicing. Maintaining this habit has been really useful; my car hasn't needed major repairs thanks to timely response to these reminders. Cost-wise, DIY saves me hundreds compared to dealership labor fees.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

What Causes a Car to Suddenly Stall?

Here are the reasons why a car may suddenly stall: 1. Electrical circuit failure: This could be due to low-voltage power interruption during driving, causing the engine to stall. In this case, you should primarily check the ignition and starter switches, as well as the fuse box. 2. Electrical component failure: This issue is usually related to the ignition coil, capacitor, or electronic ignition module. The car may start initially but stall after a while, then restart and stall again. 3. Fuel system failure: This could be caused by a damaged fuel pump, ruptured fuel line, clogged carburetor fuel inlet, or an empty fuel tank. However, in such cases, the car can usually be restarted, though with difficulty.
17
3
Share

What is BMW?

BMW is a German automobile manufacturer. Taking the BMW 320i as an example, it is a 4-door, 5-seater mid-size sedan with the following dimensions: length 4719mm, width 1827mm, height 1459mm, wheelbase 2851mm, fuel tank capacity 50L, trunk capacity 350L, and curb weight 1850kg. The BMW 320i is equipped with a 2.0T turbocharged engine, delivering a maximum power of 115kW and a maximum torque of 250Nm. It is paired with an 8-speed automatic transmission. The front suspension features a double-joint spring strut front axle, while the rear suspension uses a multi-link independent suspension.
15
4
Share

Does frequent stalling in a manual transmission car cause significant damage to the vehicle?

Frequent stalling in a manual transmission car can indeed cause damage, particularly to the engine. When the engine stalls due to being overloaded, the crankshaft may experience some impact, and unburned gasoline can remain in the cylinders. Over time, this can lead to an increase in carbon deposits within the engine. To prevent stalling when starting a manual transmission car, it's advisable to use the half-clutch technique. This method gradually reduces the speed difference between the clutch plate and the engine flywheel, allowing the car to start smoothly. When starting, first engage the first gear, then slowly lift the clutch pedal with your left foot. Pause briefly when the clutch reaches the engagement point, then continue to lift the pedal slowly while gently pressing the accelerator pedal with your right foot. This helps prevent the engine from stalling.
10
5
Share

What is the fuel tank capacity of the Mercedes-Benz C200L?

The fuel tank capacity of the Mercedes-Benz C200L is 66 liters. The fuel tank is a container for storing fuel in a vehicle and a specialized container in the hydraulic system for storing hydraulic oil or hydraulic fluid. Its functions include heat dissipation, separating air bubbles from the oil, and settling impurities. The Mercedes-Benz C200L is a mid-size sedan with a body structure of 4 doors and 5 seats. Its dimensions are: length 4784 mm, width 1810 mm, height 1457 mm, with a wheelbase of 2920 mm and a fuel tank capacity of 66 liters. The Mercedes-Benz C200L is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115 kW at 5700 rpm, paired with a 9-speed automatic transmission.
18
4
Share

How to reset the tire pressure warning on Honda CRV?

The method to reset the tire pressure warning on Honda CRV is: 1. Press the arrow button at the lower right corner of the steering wheel; 2. Press the sel/reset button to enter the tire pressure monitoring system calibration; 3. Press the sel/reset button to set the tire pressure monitoring system calibration; 4. Press the arrow button at the lower right corner of the steering wheel to calibrate; 5. Press the sel/reset button, and the calibration will complete in a few seconds to reset the warning. The Honda CRV is a compact 5-door, 5-seat SUV with body dimensions of: length 4621mm, width 1855mm, height 1679mm, and a wheelbase of 2661mm.
18
4
Share

How to operate the air conditioning in Baojun 730?

The operation method for the air conditioning in Baojun 730 is: 1. Press the AC button located at the center bottom of the central control panel; 2. The left knob is the temperature adjustment knob for the air conditioning, turning clockwise increases the temperature, while turning counterclockwise decreases it. The Baojun 730 is a 5-door, 7-seater MPV with body dimensions of: length 4780mm, width 1780mm, height 1740mm, and a wheelbase of 2750mm. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 108kW and a maximum torque of 250Nm. The front suspension uses a MacPherson independent suspension, and the rear suspension employs a torsion beam non-independent suspension.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.