How to reset the maintenance reminder on a Ford Focus?

2 Answers
DawsonAnn
07/23/25 8:53pm
To reset the maintenance reminder on a Ford Focus, follow these steps: 1. Press the one-touch start button. 2. Then, hold down the SET button on the left side of the multifunction steering wheel. 3. Wait until the car emits a "beep" sound. 4. Press the OK button on the right side of the multifunction steering wheel. 5. The maintenance reminder for the Focus will then be reset. Below is more information about the Ford Focus: 1. Vehicle dimensions: The Ford Focus is an A-segment family sedan with body dimensions of 4378mm in length, 1810mm in width, and 1468mm in height, and a wheelbase of 2705mm. 2. Exterior design: The Focus features a new family design, with sharp-looking LED headlights and striking L-shaped daytime running lights. The rear of the car is more rounded compared to the current model, and the newly designed LED taillights are highly noticeable. 3. The new car comes with dual-tone 18-inch wheels, a sporty bumper, and a rear spoiler, giving it a vibrant and youthful appeal with a strong sporty feel.
Was this review help?
14
3
Share
Mockingjay
08/10/25 6:43pm
Last time I drove a Focus, I encountered the issue of resetting the maintenance reminder. The procedure is actually quite simple: First, completely turn off the engine and ensure the dashboard is off. Then, press and hold the OK button on the steering wheel without releasing it, while turning the key to the accessory position (dashboard lights on but do not start the engine). At this point, an English prompt will appear on the dashboard. Continue holding the OK button for a few more seconds until you see the maintenance mileage reset, then release. Note that the button location may vary for different model years; for the 2015 model, it's on the right side of the dashboard. After completing the reset, it's advisable to drive for a while to check if the reminder disappears. If it still flashes, you should check if there's an actual fault. Regular maintenance is crucial for the vehicle's condition, so don't just focus on resetting the reminder and forget about the actual maintenance.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

How to Remove the Spare Tire of a Great Wall Pickup Truck?

The steps to remove the spare tire of a Great Wall pickup truck are: 1. Remove the dust cover; 2. Connect the socket wrench to the screw socket; 3. Rotate the socket wrench counterclockwise, and the spare tire will slowly descend under the traction of the steel cable; 4. Pull down the steel cable or chain and remove the clip below. Taking the Great Wall Pao 2020 model as an example, its body dimensions are: length 5437mm, width 1958mm, height 1893mm, wheelbase 3230mm, and fuel tank capacity 80L. The Great Wall Pao 2020 model is equipped with a 2.0L turbocharged engine, with a maximum power of 140kW, maximum torque of 360Nm, maximum power speed of 4000 to 5500 rpm, and is matched with an 8-speed automatic transmission.
2
5
Share

What is the size of the 230tid engine?

230tid engine is 1.2T, with a maximum horsepower of 143PS and a maximum power of 105kW. An engine is a machine that can convert other forms of energy into mechanical energy, and it is divided into: 1. Internal combustion engine: fuel burns inside the engine; 2. External combustion engine: fuel burns outside the engine; 3. Gas turbine: combustion produces high-pressure gas, which uses the high pressure to rotate the turbine blades; 4. Jet engine: an engine that directly generates thrust by the high-speed airflow ejected from the nozzle. The precautions for engine maintenance are: 1. Using high-quality engine oil can lubricate, clean, cool, seal, and reduce wear; 2. Using qualified coolant; 3. Regularly cleaning the radiator scale; 4. Regularly removing carbon deposits from the car; 5. Replacing the car's three filters on time.
14
1
Share

What does it mean when the 4WD warning light comes on?

The advantage of 4WD is that all four wheels are driven. For example, when driving on muddy roads, if one wheel or the front two wheels get stuck, the rear two wheels can still drive, allowing the vehicle to pass smoothly. Due to better tire traction and steering force, 4WD is classified as an active safety system. Active safety systems include ABS, ESP, etc. 4WD includes three types: on-demand four-wheel drive, part-time four-wheel drive, and full-time four-wheel drive. The 4WD warning light is a four-wheel drive fault indicator, which usually comes on due to the following situations: 1. Abnormal speed ratio of the four wheels: Abnormal speed ratio of the four wheels. Switching the four-wheel drive can solve the problem. 2. Open circuit in the four-wheel drive system: Open circuit in the four-wheel drive system. Disconnecting the negative terminal of the battery can restore normal operation. 3. Oxidation of the four-wheel drive switch connector: Oxidation of the four-wheel drive switch connector. Go to a 4S shop or a professional auto repair shop and have a professional use a computer to eliminate the fault.
16
1
Share

How to Remove Car Battery Cables?

The method to remove car battery cables is: 1. Confirm the battery location; 2. Prepare disassembly tools; 3. Use a wrench to loosen the screw on the negative terminal post of the battery, then twist the negative terminal left and right by hand to remove it. The functions of the battery are: 1. To supply power to the starting system, ignition system, and electronic fuel injection system during engine startup; 2. To provide power to the vehicle's electrical equipment when the engine is stopped or at low idle; 3. The car battery acts as a voltage stabilizer for the entire vehicle's electrical system; 4. The car battery can store excess electrical energy generated by the alternator. The maintenance methods for car batteries are: 1. Clean the accumulated white acid corrosion powder on the battery terminals to extend service life; 2. Add distilled water to the middle between the upper and lower level marks; 3. Check whether the battery is charging normally.
12
5
Share

What car has a T-shaped license plate?

A car with a T-shaped license plate is a Tesla. Taking the 2021 Tesla Model 3 as an example, its body dimensions are: length 4694mm, width 1850mm, height 1443mm, wheelbase 2875mm, minimum ground clearance 138mm, and trunk capacity 425L. The 2021 Tesla Model 3 has a total motor power of 202kW and a total motor torque of 404Nm, paired with a single-speed electric transmission. It features a front suspension type of double-wishbone independent suspension and a rear suspension type of multi-link independent suspension.
19
4
Share

What is the difference between 98 and 95 gasoline?

Here are the differences between 98 and 95 gasoline: 1. Different octane numbers. The grade only indicates the octane number of gasoline. The octane number of gasoline is determined by using isooctane and n-heptane as standard fuels, making the detonation intensity they produce the same as that of the sample. The volume percentage of isooctane in the standard fuel is the octane number of the sample. 95 gasoline: 95 gasoline is 95% isooctane and 3% n-heptane. 98 gasoline: 98 gasoline is a mixture of 98% isooctane and 2% n-heptane. 2. Different anti-knock combustion capabilities. The higher the octane number, the better the anti-knock combustion capability. 95 gasoline: The anti-knock combustion capability is average among the three types of gasoline. 98 gasoline: Compared with the above two types of gasoline, 98 gasoline has higher anti-knock performance and power. Additional information: 1. The formulation of the national standard for phase V vehicle gasoline not only considers the urgent requirements for air pollution prevention and air quality improvement in China at present and in the future but also takes into account the current production and use of vehicle gasoline products in China, as well as the technical transformation needs of oil product production enterprises and the requirements of vehicle emission control technologies. The main indicators are equivalent to the current European standard levels, meeting the requirements of China's phase V gasoline vehicle pollutant emission standards. 2. The implementation of the standard will help promote the overall improvement of the quality of vehicle gasoline in China, reduce the emission of pollutants from motor vehicles, and reduce the emission of nitrogen oxides and particulate matter from new vehicles by 25% and 80% respectively. The overall emission of in-use vehicles can be reduced by 10% to 15%. This standard is of great significance for protecting the environment and improving air quality.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.