How to Reset the Maintenance Reminder on a Focus?

1 Answers
MacNora
07/29/25 7:52pm
To reset the maintenance reminder on a Focus, follow these steps: 1. Close all doors and windows; 2. Turn the ignition switch to position 2; 3. Simultaneously press and hold the accelerator and brake pedals for 15 seconds; 4. Release both pedals when English text appears on the instrument panel; 5. The system will reset, clearing the reminder. The Focus is a compact 4-door, 5-seater sedan with dimensions of 4647mm in length, 1810mm in width, and 1468mm in height, featuring a 2705mm wheelbase. It is powered by a 1.5L naturally aspirated engine delivering 90 kW of maximum power and 153 Nm of peak torque, with front-wheel drive configuration. The front suspension utilizes MacPherson struts, while the rear employs a torsion beam non-independent suspension.
Was this review help?
2
4
Share
More Forum Discussions

What does S-line mean on Audi cars?

Audi S-line refers to the sport appearance package. Differences from other Audi models: front fog lights, side panels and foot pedals with "S-line" lettering. Below are detailed explanations about Audi S-line: 1. Package features: Audi S-line indicates a style package configuration, not a specific model. The common differences between A4 S-line and regular A4 are limited to front grille, front bumper style, side skirt style, trunk style, rear bumper style, etc. 2. "Pillow with embroidery": The S-Line series is colloquially called "pillow with embroidery". It simply adds sport packages designed and manufactured by Quattro GmbH to mainstream models, with power levels and braking systems identical to mass-produced models. The only "real deal" is the stiffer suspension after tuning, so don't confuse it with the S series or even RS series. 3. No essential changes to the model: S-line adds these packages and configurations to the original A4, making the traditional A4 look more sporty like the S4, but at a much lower price than S4. This meets the psychological demands of some enthusiasts, while the essential tuning methods and style of the model remain unchanged.
4
2
Share

Why is the engine shaking and weak?

Engine shaking and weakness are caused by severe carbon deposits inside the engine. If there is excessive carbon buildup in the engine, during a cold start, the fuel injected by the fuel injector will be largely absorbed by the carbon deposits, resulting in insufficient fuel entering the cylinders and causing the engine to shake and feel weak. An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. The engine can refer to both the power generation device and the entire machine including the power unit (e.g., gasoline engines, aircraft engines).
9
1
Share

Can Shell and PetroChina Gasoline Be Mixed?

Shell and PetroChina gasoline can be mixed as long as they have the same octane rating. Gasolines with different formulations share the same base oil, differing only in additives. However, these additives do not affect gasoline usage—only the octane rating impacts engine performance. Therefore, gasolines from different stations can be mixed if they share the same octane rating. The octane rating represents the ratio of the actual gasoline's anti-knock properties to those of standard gasoline. A higher octane rating indicates stronger anti-knock performance. Standard gasoline consists of isooctane and n-heptane, and a higher octane rating is not necessarily better. The appropriate octane rating should be chosen based on the engine's compression ratio.
13
2
Share

Can You Make a U-Turn in a Lane Marked for Left Turns?

A lane marked for left turns may or may not allow U-turns, depending primarily on the signage at the intersection. Here are the specifics: 1. Vehicles are prohibited from making U-turns at locations with signs or markings indicating 'No U-Turn' or 'No Left Turn.' 2. If there is a dashed line between the left-turn stop line and the crosswalk, U-turns are permitted. However, whether you can make a U-turn on a red light depends on the presence of barriers or green islands. Basic considerations for making a U-turn include: 1. Intersections with U-turn signals: Follow the traffic signals and ground markings, typically in the leftmost lane. 2. Intersections without U-turn signals but with left-turn signals: As long as there are no 'No U-Turn' signs or separate U-turn signals, vehicles can make U-turns at any time, provided they do not interfere with normal traffic and ensure safety. 3. Yellow grid areas: These indicate no stopping. If the light is red ahead, vehicles behind should avoid this area. 4. Crosswalk areas: Although these areas generally lack 'No U-Turn' signs, they are equivalent to pedestrian walkways and do not permit U-turns.
5
4
Share

What does Yinglang GT mean?

Yinglang GT refers to the Buick Yinglang GT, which truly integrates performance and comfort and is known as the 'little LaCrosse'. This vehicle, with its product strength of a premium sedan, has created a new pattern in the mid-to-high-end car market and is a three-box car. The Yinglang GT features a native vertical waterfall-style grille design that is harmoniously matched. The willow-leaf-shaped crystal diamond headlights have rounded edges, aligning with the plain and stable styling of family cars. The cooling vent area of this car has been reduced, and the front fog lights have been changed to a mild and simple oval shape. The Yinglang GT has a body length, width, and height of 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm. The car is front-engine, front-wheel drive, and its engine delivers a maximum power of 120kW and a maximum torque of 230Nm.
2
3
Share

How to Solve the Problem of Door Glass Rattle?

Solutions for door glass rattle: 1. The rubber guide rail of the door glass is too dirty or has foreign objects: Use clean water or rubber protectant sprayed on a lint-free cloth, then wrap it around a ruler or other flat tool and insert it into the rubber groove for cleaning; 2. The rubber guide rail of the door glass has aged: Use rubber protectant to temporarily restore some elasticity to the rubber, reducing the noise caused by friction with the glass, but this only lasts for about ten minutes, and the rubber can be replaced; 3. The lifting mechanism has dust, debris, or a faulty lifting motor: Clean the contaminated grease and apply new grease to solve the problem, but if the motor is faulty, it can only be replaced entirely.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.