How to reset the maintenance reminder light on the Great Wall VV7?

[DeKate]

The method to reset the maintenance reminder light on the Great Wall VV7 is: 1. Turn on the ignition switch while pressing the reset button; 2. Turn off the ignition switch and hold the reset button until the clock and mileage on the dashboard disappear, then release the button; 3. Press the reset button again, turn on the ignition switch once more, and the maintenance reminder will flash; 4. Turn on the ignition again to reset the light. Taking the 2021 Great Wall VV7 as an example, its body dimensions are: length 4760mm, width 1931mm, height 1655mm, wheelbase 2950mm, minimum ground clearance 211mm, fuel tank capacity 65L, and trunk capacity 306L.

[DiElaina]

Last time I helped a friend with their Great Wall VV7 on this issue, resetting the maintenance light was quite straightforward. Turn the car key to the ON position without starting the engine, and the dashboard will light up. Use the left or right buttons on the steering wheel to navigate—usually, a long press to the right enters the menu. Find the vehicle settings or maintenance option, where there's a button to reset the maintenance reminder. Click to confirm and hold for about 5 seconds until the light goes off. Don’t forget to do this right after maintenance to avoid false alerts. If the light comes on again later, it might indicate a need for new maintenance, so it’s recommended to check every 5,000 kilometers. This method works for most modern cars—quick to learn, safe, and reliable.

[VonMaya]

I've been driving my Great Wall VV7 for over three years now, and resetting the maintenance light is something I do regularly—it's simple and hassle-free. Turn the key to the ON position without starting the engine, then use the steering wheel buttons to navigate the dashboard menu. Usually, a few presses of the right button will bring up the maintenance settings, where you can select the reset option and hold it until the light disappears. Don’t attempt this while driving on the highway; it’s safer to do it when parked. This light serves as a reminder that your maintenance period is due—clearing it keeps your car running smoothly, so don’t delay resetting it after servicing. On a side note, regular maintenance can extend your engine’s lifespan, saving you fuel and headaches in the long run.

[OMason]

The steps to reset the maintenance light on the Great Wall VV7 are straightforward, based on my several practices. Turn the ignition to the ON position, use the steering wheel controls to locate the settings menu, navigate to the maintenance item, and select reset. Press the button to confirm for a few seconds until the light goes off. Ensure the operation is performed safely in a parking space. Remember to reset it after maintenance to avoid annoying reminders.

[LukeLee]

My VV7's maintenance light came on last time, so I promptly reset it. Turn the key to the ON position without starting the engine. Once the dashboard activates, use the steering wheel buttons to switch options. Navigate to the maintenance settings in the vehicle information menu, select 'Clear Reminder,' and confirm. Wait patiently for a few seconds, and the light will turn off. It's a simple one-minute fix—don't wait until the next startup to avoid distractions. After clearing the maintenance light, the car runs quieter, and regular upkeep helps reduce repair costs, killing two birds with one stone.