How to Reset the Maintenance Reminder Light on Great Wall Fengjun 5?

[DelMalachi]

Great Wall Fengjun 5 maintenance light reset method is as follows: Turn off the car's engine, after the engine is off, press and hold the reset button, insert the key to start the engine. After the vehicle starts, release the reset button, briefly press the clock adjustment button once, at this time the maintenance cycle light shows it is in reset mode, after a few seconds it returns to the normal view, and the maintenance light reset is completed. Great Wall Fengjun 5 model features: The interior color scheme has changed from gray to a black and gray dual-tone combination, and the center console panel and air vent trim panels are painted silver. In addition, the seats have undergone process improvements, and new seat fabrics have been selected, making them more comfortable. In terms of power, it still comes with a 2.0T diesel engine, 2.5T diesel engine, 2.8T diesel engine, and 2.2L, 2.4L gasoline engines, paired with a 5-speed manual transmission.

[DeLane]

I've been driving a Great Wall Wingle 5 for several years, and I can handle the maintenance reminder light myself when it comes on. The method is quite simple: After getting in the car, turn the key to the ON position but don't start the engine. At this point, the dashboard will display some information. Then, locate the small TRIP button or ODO button on the dashboard, press and hold it while keeping an eye on the maintenance light indicator. After holding it for about 5 to 10 seconds, the light will go off. Why does this light exist? It reminds you to perform maintenance based on mileage, such as changing the oil every 5,000 kilometers. If you don't reset it in time, the light will keep flashing, which can be a bit annoying, but it doesn't affect driving safety. I recommend resetting it right after each maintenance to save trouble next time. You can also check the user manual, which details the specific steps, as the button location may vary slightly for different models.

[SanAaliyah]

As an ordinary car owner, I find resetting the maintenance reminder light quite easy. First, sit in the car and turn the key to the ON position without starting the engine, then observe the dashboard; usually, there's a small wrench-like icon button—just press and hold it for about 5 seconds, and the light will go off. Don't worry about damaging the car; this feature is just a reminder for maintenance. Occasionally, I forget to reset it, and the light stays on for a few days without any issues, but it's best to clear it promptly to avoid affecting your driving mood. Additionally, if the light doesn't turn off after maintenance, it might be due to the system not being reset or an issue with the maintenance data—in such cases, it's best to visit a repair shop for a check. Remember, safety first—don't get distracted while performing this operation.

[AdalynnFitz]

From my experience with car maintenance, resetting the maintenance light on the Great Wall Wingle 5 is quite straightforward. Turn the key to the ON position, press and hold the RESET or TRIP button on the dashboard for a few seconds until the light goes off. Why does the light come on? It's designed based on engine running time to remind you to change the oil and filter. If not reset, the light will keep flashing. While it's not a big deal, a friend of mine once got distracted by it while driving. I recommend resetting it promptly after regular maintenance to avoid future hassles; you can also try different button combinations—sometimes you can access the reset menu via steering wheel buttons too. Overall, it's not technically challenging and takes just minutes to complete.

[JulietLynn]

I remember the maintenance light was on after the last service, and it took me a little time to reset it. The method is as follows: Sit in the car, turn the key to the ON position but don't start the engine, then look for the small control button on the dashboard; usually, it's the TRIP button, hold it for 5-10 seconds, and release when the maintenance light icon disappears. This light comes on because the car calculates the maintenance cycle, and if not addressed in time, the light will stay on constantly. Although it doesn't affect performance, it can be a bit annoying. I think it's smart to reset it yourself after maintenance, saving money and avoiding a trip to the repair shop. Also, make sure the car is stationary and safe during the operation to avoid doing it while driving; if the button doesn't respond, check the manual or seek professional help.