How to Reset the Maintenance Reminder Light on Chery Vehicles?

1 Answers
ConnorRose
07/29/25 3:17pm
The method to reset the maintenance reminder light on Chery vehicles is as follows: 1. Turn on the ignition switch and use the instrument mode adjustment button to switch the display to the instantaneous fuel consumption state. 2. Turn off the ignition switch, hold down the right mode switch, then turn on the ignition switch, and release the right mode switch. 3. Within 30 seconds, simultaneously press both buttons on the instrument panel—the mode switch and the clock switch—to clear the maintenance light. Below is some related information: The original purpose of the maintenance light is to remind the vehicle owner to perform maintenance as soon as possible. Therefore, the owner should promptly visit a 4S shop for maintenance. After the maintenance is completed, the 4S shop will use a diagnostic tool to reset the maintenance light. The quickest and most accurate way to reset the maintenance reminder light is by using a diagnostic tool. Most vehicle owners do not have such equipment, so it is recommended to reset the light at a 4S shop after maintenance or visit an external 4S shop for resetting.
Was this review help?
17
0
Share
More Forum Discussions

What is the weight of vehicle-mounted fire extinguishers as stipulated by national regulations?

According to national regulations, the minimum filling capacity of a vehicle-mounted fire extinguisher is one kilogram. As a car owner, when purchasing a vehicle-mounted fire extinguisher, you can choose one weighing between 1-3 kilograms. Below are the relevant instructions: How to choose: Common causes of car fires include electrical fires and fuel leakage fires. For electrical fires, a water-based mist extinguisher is more suitable; for fuel fires, a water-based foam extinguisher is preferable. Dry powder fire extinguishers have good versatility and a wide range of applications, making them suitable for both types of fires mentioned above. Usage specifications for dry powder fire extinguishers: Before use, the extinguisher should be fully inverted and shaken several times to ensure the dry powder inside is loosened. Pull out the safety pin, hold the nozzle with your hand (or support the bottom of the bottle with your hand if it is a tubeless extinguisher), and aim the nozzle at the base of the flame. Press the handle of the extinguisher firmly, and the dry powder will then be discharged from the nozzle.
7
5
Share

What is the weight of the Boyue in tons?

The weight of the Geely Boyue varies depending on the configuration. The heaviest is the four-wheel-drive model, weighing 1745 kg, while the lightest is the 2.0L manual transmission model, weighing 1565 kg. Below is some relevant information about the Boyue: 1. The Boyue is a compact SUV under Geely, equipped with two engines: a 2.0L naturally aspirated engine and a 1.8L turbocharged engine. The 1.8L turbocharged engine has a maximum power of 135 kW, a maximum torque of 300 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1750 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. 2. The 2.0L naturally aspirated engine has a maximum power of 104 kW, a maximum torque of 178 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed range of 4000 to 4500 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum cylinder head and block.
10
4
Share

How to Turn Off the Air Conditioning in a Chevrolet Cruze?

Turn the air vent volume adjustment knob of the Cruze all the way to the right to turn off the blower. When the cold air is on, you can directly press the AC button. Related instructions are as follows: 1. The button marked with the A/C symbol on the Cruze's air conditioning panel is the compressor switch, which needs to be turned on for cooling. The three buttons in the middle adjust the direction of the air vents. The two buttons in the upper right corner are the front windshield defogging buttons, used when the windows fog up. The button in the lower right corner is the rearview mirror heating switch, used in rainy weather. The knob on the left adjusts the air volume, and the one on the right adjusts the temperature. 2. When using the air conditioning in winter, do not rush. Wait until the water temperature rises before turning it on. For warm air, simply turn on the air conditioning and adjust the wind speed and temperature. The warm air in the car's air conditioning comes from the heat dissipation of the car's radiator. The water in the radiator needs some time to reach a certain temperature after the engine starts. You can check the current water temperature through the temperature gauge on the dashboard. If the temperature is not high enough, turning on the air conditioning will only blow cold air.
8
5
Share

What is the recommended speed for a new car during the high-speed break-in period?

During the break-in period of a new car, the speed should generally be maintained between 30-90 km/h, and the engine RPM is best kept between 2,000-2,500, not exceeding 3,000 RPM. Controlling the engine RPM is more critical during the break-in period. Here are some additional details: 1. Generally, the break-in period is divided into three stages: initial, middle, and late. During the initial stage, the maximum speed should be kept around 40 km/h; in the middle stage, on roads with good conditions, the maximum speed can be increased to 60 km/h; by the late stage, it can be raised to around 80 km/h. Maintaining a moderate speed during the break-in period is essential—speed should not be too high or too low, as excessively low speed can increase fuel consumption. 2. Speed limits are essentially limits on engine RPM. During the break-in period, it is crucial to control driving speed and avoid excessively high speeds. After driving 1,500 km, you can gradually increase the RPM and speed to the vehicle's maximum allowed speed, but avoid pressing the accelerator too hard to ensure that pistons, cylinders, and other important components increase their load in a gentle state.
11
3
Share

Is it necessary to replace the steering knuckle ball joint?

Whether to replace the steering knuckle ball joint depends on the situation. A loose tie rod end can cause the steering to pull to one side, uneven tire wear, steering wheel vibration, and in severe cases, the ball joint may detach, leading to sudden wheel misalignment. It is recommended to replace it promptly to avoid safety hazards. External symptoms of a damaged steering knuckle ball joint include: hearing abnormal noises when turning; feeling excessive play in the steering, resulting in unstable steering while driving; minor issues may cause unstable steering, while severe cases can lead to sudden wheel misalignment, especially at high speeds. During use, it is essential to regularly inspect the vehicle's steering ball joints and address any issues promptly to prevent a series of faults caused by steering ball joint failure. Neglecting such faults is an incorrect driving mindset, so vehicle issues should be addressed immediately. Note: After replacing the ball joint, a wheel alignment must be performed. Steering wheel misalignment is unrelated to ball joint alignment. If the steering wheel looks off, first have a professional correct it by straightening the wheels, removing the steering wheel (just a few screws), and reinstalling it in the correct position. Drive the car on a straight road, center the steering wheel, and ensure the vehicle travels straight. If the car drifts, it indicates the ball joint is not aligned correctly and requires re-alignment.
5
3
Share

Is the Accord produced by GAC Honda or Dongfeng Honda?

Accord is a model produced by GAC Honda. Since the sixth-generation Accord entered China in 1999, it has now reached its tenth generation. Below is an introduction to the GAC Honda Accord: Safety Performance: The Accord consistently applies high-level collision safety research results to its body design. The high-strength body enhances driving reliability, while the use of a sliding subframe, enlarged buffer structures, and high-strength steel plates maximizes the dispersion and absorption of impact energy, preventing deformation of the passenger compartment and injuries to occupants. Power Configuration: The new Accord is equipped with an i-VTEC intelligent variable valve timing and lift electronic control engine. The ECU computer controls the opening and closing of the intake valves to maintain the engine's optimal performance. Most importantly, it continuously provides over 80% of torque within the 2500 to 5500 rpm range.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.