How to reset the maintenance reminder light on an Alto?

1 Answers
EmilianoMarie
07/29/25 10:31pm
The method to reset the maintenance reminder light on an Alto is: 1. Turn off the ignition switch; 2. Press the trip meter reset button on the dashboard while starting the vehicle to reset it. Taking the 2016 Alto Manual Luxury Dynamic Edition as an example, it belongs to the microcar category with body dimensions of 3570mm in length, 1600mm in width, 1470mm in height, and a wheelbase of 2360mm. The 2016 Alto Manual Luxury Dynamic Edition is equipped with a 1.0L naturally aspirated engine, delivering a maximum power of 52kW at 6200rpm and a maximum torque of 92Nm.
Was this review help?
2
5
Share
More Forum Discussions

Will I get points deducted for making a left turn into the wrong-way lane and reversing?

Making a left turn into the wrong-way lane and reversing will result in points being deducted, as this constitutes the illegal acts of driving against the traffic and not staying in the correct lane. Below are some precautions to take when turning a car: Pay attention to speed: You should slow down within 50 to 100 meters before the turn, use the turn signal to indicate your direction, and make sure to turn slowly, watch as you turn, and pass through safely. Be observant: When turning, you should closely monitor the inside of your car's turn to avoid getting too close to the roadside and hitting pedestrians. Additionally, you need to watch out for other vehicles, as well as pedestrians, bicycles, or motorcycles that might be too close to your car and trying to compete for the lane.
13
2
Share

What is the trick to maintaining clutch control in Subject 2?

Subject 2 maintaining clutch control trick is to press the clutch pedal all the way down after getting in the car, shift into first gear, and then gently release the clutch. The following is a related introduction to the Subject 2 test: Test content: includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. Passing standard: According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", the Subject 2 test for C1 and C2 driving licenses has a total score of 100 points. Each item has deduction standards for failure (directly deducting 100 points), deducting 20 points, deducting 10 points, and deducting 5 points. A total score of over 80 points is considered a pass.
20
2
Share

Which button is the interior door release button for Lincoln rear doors?

The interior door release button for Lincoln rear doors is the B-pillar keypad door unlock button. Taking the Lincoln Navigator as an example, here are the specific details of the Lincoln Navigator: 1. Vehicle Positioning: The Lincoln Navigator is a luxury full-size SUV produced by Ford Motor Company, with dimensions of 5350mm*2073mm*1937mm. 2. Powertrain: It is equipped with a 5.4-liter V8 engine, delivering a maximum output power of 224 kW and a maximum torque of 490 N·m, providing robust performance. It is paired with a 6-speed 2F automatic transmission, offering either two-wheel or four-wheel drive.
15
2
Share

Where is the seat adjustment button located?

The seat adjustment button is typically located on the left or right side of the inner seat cushion or near the armrest. Here are some relevant details: 1. Prioritize controllability: Adjusting the car seat is the first thing a driver should do before driving. This includes setting the height, front/rear distance, and backrest tilt angle, which also affects the distance between your legs and the brake, accelerator, or clutch pedals. The overall adjustment should aim for comfort and optimal controllability. 2. Requirements: Generally, adjust according to your height to ensure that when your right foot fully depresses the accelerator, brake, or clutch pedal, your leg maintains a naturally slightly bent position. This indicates the most suitable front/rear seat distance.
20
3
Share

What is the normal static pressure for a car's air conditioning system?

Under normal operating conditions of the air conditioning system, the low pressure is generally between 1.0—2.5 bar, and the high pressure is between 15—18 bar. When idling, the high pressure may be slightly higher in high ambient temperatures, reaching up to approximately 2.5~2.8 MPa, but it generally does not exceed 3.1 MPa. Related information: 1. Air conditioning components: Typically include refrigeration units, heating units, and ventilation units. This combined system makes full use of the limited space inside the car, featuring a simple structure and ease of operation, making it a popular modern car air conditioning system internationally. 2. Precautions: When using the air conditioning for the first time in summer, check the air conditioning system, pay attention to cleaning, and regularly replace the air conditioning filter.
8
2
Share

What causes the Landwind X7 EPB light to illuminate?

The illumination of the Landwind X7 EPB light indicates an issue with the electronic parking brake. Below is a detailed introduction to the Landwind X7: 1. Vehicle Positioning: The Landwind X7 is positioned as a compact SUV, with body dimensions of 4421mm in length, 1911mm in width, and 1631mm in height, and a wheelbase of 2660mm. 2. Powertrain: It is equipped with a 1.5T 163-horsepower engine, delivering a maximum power of 120kW and a maximum torque of 250Nm. The GTDI direct-injection engine is paired with a Honeywell small-diameter dual-cooling exhaust turbocharger. 3. Features: The vehicle comes with engine start-stop, snow driving mode, sport mode, front radar, electronic parking brake, automatic air conditioning, Bluetooth phone, and navigation system.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.