How to Reset the Maintenance Reminder Light on a Chevrolet Captiva?

1 Answers
DeJessica
07/29/25 12:27pm
To reset the maintenance reminder light on a Chevrolet Captiva, follow these steps: 1. With the engine off, turn the ignition switch to the ON/RUN position. 2. Fully depress and release the accelerator pedal three times within five seconds. 3. If the engine oil change indicator does not appear, the system has been successfully reset. Taking the 2017 Captiva as an example, its body dimensions are: length 4690mm, width 1868mm, height 1756mm, with a wheelbase of 2707mm and a fuel tank capacity of 65 liters. The 2017 Captiva is equipped with a 2.4L naturally aspirated engine, delivering a maximum power of 123kW and a maximum torque of 230Nm, paired with a 6-speed automatic transmission.
Was this review help?
11
2
Share
More Forum Discussions

What are the hazards of forgetting to release the handbrake when reversing?

Forgetting to release the handbrake while reversing generally has minimal impact if the distance traveled is short, and it can be negligible. Below is the relevant content introduction: 1. Function of the handbrake: The handbrake provides resistance to the car when parked, preventing it from rolling. 2. Parking brake: Also known as the handbrake or the parking gear in automatic transmissions, it locks the drive shaft or rear wheels. The parking brake exerts much less force than the service brake. 3. Easy detection of an engaged handbrake: During driving, it's easy to notice if the handbrake is not released because the accelerator needs to be pressed deeper, the car may shake, the steering wheel becomes heavier, and these abnormalities are easily detectable. Additionally, increased driving resistance raises the load on the transmission and engine.
10
0
Share

What type of engine oil is suitable for the XRV?

The XRV engine uses original SM-grade 0W-20 or 5W-20 engine oil. Viscosity selection: In general, 5W is suitable for most regions during winter. However, in certain northern areas (such as Jilin Province), it is recommended to use 0W oil for better cold-start performance to adapt to driving environment temperatures. The high-temperature viscosity value is typically 20. However, if the vehicle frequently operates in congested areas, is older, or used for long-distance heavy-load transportation, the oil viscosity can be appropriately increased, such as using 0W-30 oil. Naturally aspirated engines have relatively modest oil quality requirements and can use mineral or semi-synthetic oil. If the budget allows, full synthetic oil can be used. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and harsher operating conditions, requiring higher-quality oil with better fluidity. Full synthetic oil is recommended. Oil brands: For long-lasting oil, Mobil oil is a good choice. For oil with strong cleaning capabilities, Shell oil can be used. For oil with strong oil film toughness, Castrol is recommended. Turbocharged engines are prone to carbon buildup during high-speed operation, so Shell oil with strong cleaning capabilities is a suitable option.
1
3
Share

What is the average lifespan of a private car?

Private cars generally have a service life of 15 years or reach 500,000 kilometers before being considered scrapped. Here is the relevant content introduction: 1. No mandatory scrapping regulations: Chinese law does not have mandatory scrapping regulations for non-operational private family cars. As long as the vehicle meets the annual inspection standards and continues to be used after reaching the scrapping standard, no approval is required. 2. The mandatory scrapping age limit has been abolished: The "Mandatory Scrapping Standards for Motor Vehicles" has been officially implemented, abolishing the maximum 15-year mandatory scrapping age limit for private cars. This means that even if a private car has been used for more than 15 years, as long as its condition meets national standards and passes the annual inspection, it can still continue to be used.
1
5
Share

How many versions does the Haval H6 Guochao Edition have?

Haval H6 Guochao Edition has four versions, namely H6.4G15, H6.4B15, H6.4C20, and H6.4N20. Features of H6.4G15: An early multi-point fuel injection engine developed by Great Wall Motors, with a power reserve of 110kw/210N.m, and an actual value of approximately 7-9 million. Features of H6.4B15: A small-displacement engine developed by Great Wall Motors, with a maximum power of 124kw and a maximum torque of 285N.m (1400-3500rpm). The technologies of continuously variable valve lift and exhaust manifold integrated into the cylinder head remain leading. Features of H6.4C20: A direct-injection 2.0T engine using Otto cycle, incorporating technologies such as DVVT, acoustic chain cover, and dual balance shafts. It also has a power reserve of 160kw/385N.m (1800-3600rpm). Features of H6.4N20: The 4N20 engine adopts Miller cycle technology, with a power reserve of 155kw/325N.m (1500-4000rpm).
2
2
Share

Where to Add Windshield Washer Fluid for Geely Binyue?

The location to add windshield washer fluid for Geely Binyue is in the engine compartment. There is a cap in the lower left corner, open it to find a blue cap, then open and pour the fluid in. Automobile windshield washer fluid is generally divided into 0℃ fluid for summer use and -20℃, -35℃ fluid for winter use. Below are the precautions for replacing windshield washer fluid: 1. In northern regions, choose antifreeze-type washer fluid to prevent the pipes from freezing and cracking when winter arrives before the fluid is used up. In southern regions, washer fluid with added insect-cleaning components is sufficient. 2. Generally, the purchased windshield washer fluid needs to be diluted before use, just follow the instructions on the manual. The car's windshield washer fluid capacity is about 1.5L, so choose a container for diluting the fluid with a capacity of 1.25L to 1.5L. 3. There is a water tank on the left side of the engine compartment, the one with a windshield spray symbol on the cap is the windshield washer fluid container. Open it and pour in the diluted antifreeze washer fluid, but do not fill it too full. It is enough to just see the water surface at the deepest point, do not exceed the MAX mark.
18
3
Share

What Causes the Brake System Warning Light to Illuminate?

Brake system warning light illumination is primarily caused by excessively worn brake pads. When this occurs, it is essential to inspect the vehicle's brake pads. Brake pads are consumable components that require regular replacement. As the vehicle's mileage increases, both the brake pads and brake discs will gradually wear down. Brake fluid is a crucial hydraulic fluid in the braking system, which also necessitates periodic replacement. Brake fluid is highly hygroscopic, and if its water content becomes too high, it can lead to extended braking distances and reduced braking force. When the brake fluid's water content reaches 3%, immediate replacement is required.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.