How to Reset the Maintenance Reminder for the Sylphy?

1 Answers
ClaireFitz
07/29/25 4:38pm
The method to reset the maintenance reminder for the Sylphy is as follows: set the power mode to ON, press the trip button to display the engine oil life on the dashboard, hold the trip button for 5 seconds until the dashboard flashes, indicating entry into the reset mode. Release and then hold the button again for 5 seconds to reset. Taking the 2021 manual comfort version of the Sylphy as an example, its body dimensions are: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50L, and trunk capacity 510L. The 2021 manual comfort version of the Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, maximum power of 90kW, and maximum torque of 155Nm.
Was this review help?
4
4
Share
More Forum Discussions

How about the safety of Haval H6?

Haval H6 has high safety performance, covering a wider range, along with 6 airbags and other auxiliary functions. Function of airbags: The main function of airbags is to prevent injuries caused by collisions between passengers and interior components during a car crash. They usually serve as auxiliary safety devices to seat belts, working together with them. Composition of airbags: They mainly consist of airbag sensors, anti-collision airbags, and electronic control devices. The driver-side anti-collision airbag is installed in the steering wheel, while the passenger-side anti-collision airbag is usually mounted on the dashboard. Airbag sensors are installed on the left, right, and middle parts of the cabin partition.
19
5
Share

Where is the rear tow hook on the Volkswagen Polo hatchback?

The rear tow hook on the Volkswagen Polo hatchback is located in the trunk. Correct towing operation: Locate the tow hook positions at the rear of the towing vehicle and the front of the towed vehicle. Some cars have split-type tow hooks that require assembly before use. After removing the cover on the bumper, assemble the included hook. Install the towing equipment. The towing vehicle should start in 1st gear to ensure sufficient torque for adequate pulling force, while controlling speed to maintain smooth driving. Increase power output when slight resistance is felt. For manual transmission models, avoid abruptly releasing the clutch pedal; instead, use a half-clutch technique for a slow start to prevent damage to the vehicle. Meaning of tow hook: The tow hook, also known as the tow ring, can be referred to by keywords such as car tow hook or towing ring. It is generally placed at the front end of the tow vehicle and serves the purpose of towing the vehicle body.
10
1
Share

Are Mercedes-Benz Cars Fuel-Consuming?

Mercedes-Benz cars are fuel-consuming. The 1.3t model has a combined fuel consumption of 5.4 liters per 100 kilometers, while the 2.0t model consumes approximately 7-8 liters per 100 kilometers. Reasons for high fuel consumption: Possible causes include damaged pistons or piston rings leading to oil burning, where fuel cannot fully combust to generate power. New drivers may keep the accelerator pedal pressed without lifting it, neglecting to vary speed, which inadvertently increases fuel consumption. Aging machinery or faults in the computer control system can also contribute. Additionally, leaks in the fuel tank or fuel lines can result in fuel loss. Tips to reduce fuel consumption: Master the use of the clutch pedal through practice, ensuring smooth and steady operation. Develop good habits by pressing the clutch pedal fully and releasing it slowly. Coordinate the accelerator and clutch pedals effectively: start by engaging first gear, release the clutch slowly, apply throttle at the half-clutch point, and fully release the clutch only after the car starts moving.
4
0
Share

What is the wiper size for the Teana 2.3?

The wiper size for the Teana 2.3 is 26/17 inches. Wiper System: Wipers generally include vacuum wipers, electric wipers, and wipers with electronic control units. The wiper system is an important accessory installed on the windshield, designed to remove rain, snow, and dust that obstruct visibility on the windshield, playing a crucial role in driving safety. Wiper System Working Principle: The motor on an electric wiper drives the output shaft via a worm gear on the armature shaft, and the output gear is driven through an idler gear and idler shaft. The output arm connected to the wiper linkage is then operated by the output shaft. When the motor rotates, the output arm and linkage are driven to move in a back-and-forth motion.
10
2
Share

What is the curb weight of Chery Flagcloud?

Chery Flagcloud has a curb weight of 990KG. General weight of cars: A small car weighs about 1.5 tons, with general family cars ranging between 1.2 to 1.3 tons, mid-to-high-end cars around 1.4 to 1.6 tons, and heavier ones between 1.8 to 2.0 tons. Excessive body weight can lead to higher fuel consumption, poorer handling, slower acceleration, and increased braking distance. Methods to reduce car weight: In terms of materials, using lighter materials such as aluminum alloy and carbon fiber; in design, optimizing structural design to reduce the use of unnecessary materials while ensuring structural rigidity, thereby saving weight and cost.
13
3
Share

How long does it take to replace the taillight at an Audi 4S store?

Replacing the taillight at an Audi 4S store can take as short as about 2 hours or as long as about 6-7 hours. Introduction to taillights: Taillights are lights installed at the rear of a vehicle, typically with a main color of red. From an optical perspective, red light has the longest wavelength in the spectrum, making red objects visible from a great distance. Additionally, due to its strong penetrating power, red light remains highly visible in foggy or rainy conditions. Psychologically, red has a warning effect, creating an alert signal in the human brain and making people more vigilant. Therefore, not only car taillights but also many warning or prohibition signs in daily life are red. Repairing a damaged taillight: First, check the bulb—if it's damaged, it needs to be replaced. Then, inspect the wiring to see if it's due to a short circuit. Finally, check if the fuse is broken; if so, it should be replaced at a repair shop.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.