How to Reset the Maintenance Reminder for the 2020 Teramont?

2 Answers
JohnMarie
07/25/25 12:17am
2020 Teramont maintenance reminder can be reset by selecting the oil change content with the indicator key on the right side of the steering wheel and then pressing and holding the confirmation key. Below is some relevant information about the 2020 Teramont: 1. Introduction: The 2020 Teramont series is equipped with a 10.2-inch full digital LCD instrument panel and adds luxurious leather leg rests for the front driver and passenger seats. In addition, the Comfort and Luxury versions feature an upgraded 8-inch full touchscreen entertainment and navigation system. 2. Powertrain: The 2020 Teramont is powered by an EA390-2.5T-V6 turbocharged engine, delivering a maximum torque of 500Nm and a rated power of 220kW. The engine works seamlessly with the DQ500 DSG seven-speed wet dual-clutch transmission, achieving a 0-100 km/h acceleration time of just 6.9 seconds.
Was this review help?
10
5
Share
SanCole
08/10/25 3:42pm
I drive a 2020 Touareg, and the maintenance reminder light is quite annoying when it pops up. Once I forgot to reset it after maintenance, and the light kept flashing, distracting me. Here's the method: First, don't start the engine; turn the key to the ON position (where the dashboard lights up but the engine doesn't run). On the right side of the dashboard, there's a small button labeled 0.0 or the reset button. Hold it down for 5 to 10 seconds, and a 'Reset Maintenance Data' prompt will appear on the screen. Confirm it using the directional keys or knob. The process is simple, but make sure the key is in the correct position. The first time I tried, I didn't hold it long enough and released it too soon, causing the light to shine even brighter. Timely operation is crucial to avoid it interfering with daily driving reminders for maintenance. Make it a habit to reset it after each maintenance to keep the car in better condition.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

What Lights to Use When Driving on Highways at Night?

When driving at night, whether on highways or regular roads, the width indicator lights must be turned on. For highway driving at night, high beams can be used, but they should be used appropriately in combination with low beams. High beams can be used when the distance to the vehicle ahead is greater than 150 meters, but should be switched to low beams when the distance decreases. Rules for using car lights: The parking lights, commonly known as "small lights," are usually the first setting on the light switch. When activated, all dashboard lights inside the car illuminate, and small lights at the front and rear of the car also turn on. These lights are not very bright but are mainly used to make the four corners of the vehicle visible. They should be turned on during dusk, rainy weather, or in dimly lit areas like underground parking lots. Low beams are used for driving in urban areas at night. Since city roads are usually well-lit by streetlights, there is no need for high beams to illuminate distant road surfaces; low beams are sufficient to see the road ahead clearly. High beams are suitable for use in rural areas or on roads without street lighting. When high beams are activated, a prominent blue indicator light on the dashboard will illuminate as a reminder.
9
4
Share

How much engine oil should be added to a scooter?

Different scooters require varying amounts of engine oil. Taking common small-displacement scooters as an example, the oil capacity typically ranges between 0.75~1.0 liters (750-1000 milliliters). The exact amount should be verified using the oil dipstick or inspection window. On level ground with the bike supported by its main stand, the oil level should reach between the lower and upper marks on the dipstick's grid pattern or between the lower and upper lines of the inspection window. Below is some information about engine oil: 1. Composition of engine oil: Engine oil is the lubricant used in engines, consisting of base oil and additives. 2. Density and functions of engine oil: With a density of approximately 0.91×10³ (kg/m³), engine oil serves multiple purposes including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption.
4
0
Share

How to Check the Engine Oil Level in a Mercedes-Benz E200?

To check the engine oil level in a Mercedes-Benz E200: view it on the car's dashboard by using the adjustment buttons on the multifunction steering wheel to switch the display to the maintenance oil section. Generally, the engine oil should be replaced every 5,000 kilometers of driving, as prolonged use leads to varying degrees of oil consumption. Engine oil serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. The dimensions of the Mercedes-Benz E200 are a length of 5012mm, width of 1855mm, height of 1464mm, with a wheelbase of 3014mm, offering significantly more space compared to the imported short-wheelbase version.
2
1
Share

What models are available in the Mercedes-Benz A-Class?

Mercedes-Benz A-Class has three models: A180L, A200L, and A220L. It is a joint venture model introduced and produced by Beijing Benz. All Mercedes-Benz A-Class models comply with the China VI emission standards, with body dimensions of 4622mm in length, 1796mm in width, and 1454mm in height, and a wheelbase of 2789mm. The newly developed pre-tensioned seat belts and airbags represent the latest technology from Mercedes-Benz, such as adaptive dual-stage front airbags, seat belt tensioners, and newly developed head and thorax airbags installed in the previous side airbag positions. In terms of driving dynamics, the new A-Class also has unique features. The main innovation in the chassis is reflected in the rear axle, which ensures high-precision path tracking and excellent anti-roll performance during cornering.
15
0
Share

Should the e300 use 95 or 98 octane fuel?

e300 can use 95 octane gasoline, and 98 octane gasoline is also acceptable. Gasoline is composed of isooctane and n-heptane, and the octane rating should be selected based on the engine's compression ratio. The Mercedes-Benz E-Class is a mid-to-large-sized sedan under the Mercedes-Benz brand. The domestically produced models are all long-wheelbase versions, with a wheelbase of 3014mm, providing ample interior space and enhancing comfort for both front and rear passengers. The Mercedes-Benz e300 is equipped with three types of engines: a 1.5-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine.
5
1
Share

What Does the Blue Parking Space Line Represent?

Blue parking space lines indicate free parking spaces, white lines denote paid parking spaces, and yellow lines represent dedicated parking spaces. Blue parking spaces are further distinguished by solid and dashed lines: dashed lines indicate 3-minute or 15-minute free temporary parking spaces, while only solid lines signify free long-term parking spaces, typically designated around government office areas. The differentiation of road traffic markings is as follows: White dashed lines, when marked on road sections, are used to separate traffic flows in the same direction or serve as safety distance recognition lines; when marked at intersections, they guide vehicle movement. White solid lines, when marked on road sections, separate motor vehicles from non-motor vehicles traveling in the same direction or indicate the edge of the roadway; at intersections, they may serve as guide lane lines or stop lines. Yellow dashed lines, when marked on road sections, separate opposing traffic flows. When marked on the roadside or curbs, they prohibit long-term parking along the road. Yellow solid lines, when marked on road sections, separate opposing traffic flows; when marked on the roadside or curbs, they prohibit both long-term and temporary parking along the road.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.