How to reset the maintenance reminder for the 2016 Focus?

1 Answers
MacCaleb
07/29/25 10:07pm
The method to reset the maintenance reminder for the 2016 Focus is: Press the vehicle's one-touch start button to start the engine, then continuously press the 'set' button on the left side of the multifunction steering wheel until you hear a beep sound. Next, press the 'OK' button on the right side of the multifunction steering wheel to cancel the maintenance light reminder. Taking the 2020 Focus as an example, it belongs to the compact car category with the following dimensions: length 4378mm, width 1810mm, height 1468mm, wheelbase 2705mm, fuel tank capacity 53L, and curb weight 1242kg. The 2020 Ford Focus features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5T turbocharged engine delivering a maximum horsepower of 122PS, maximum power of 90kW, and maximum torque of 153Nm, paired with a 6-speed manual transmission.
Was this review help?
13
5
Share
More Forum Discussions

What causes the squeaking sound when the windows of the new Mondeo are rolled up and down?

New Mondeo's squeaking windows when rolling up and down can be repaired at a 4S shop. Functions of opening car windows: Opening a single car window while driving can ventilate the car, especially when smoking inside. Opening one side of the car window will quickly expel the smoke from the car. It is recommended that owners do not smoke while driving, as it can easily affect normal driving operations. Opening three windows simultaneously: Three windows can be opened at the same time because this method of opening windows will cause abnormal air circulation inside the car, and the air movement has a clear directionality, so the odor inside the car will be quickly discharged. Opening the windows diagonally while driving will reduce the noise inside the car, not only with good ventilation effect but also without affecting normal driving.
9
2
Share

What is the ground clearance of the new Elantra?

New Elantra's minimum ground clearance is 160mm. Definition of ground clearance: Ground clearance (i.e., minimum ground clearance) refers to the minimum height between the vehicle's chassis and the ground when the car is fully loaded. Ground clearance range: Theoretically, the ground clearance of family cars usually ranges between 110-150mm. For sedans, greater ground clearance (over 130mm) generally means better passing ability but poorer high-speed stability; smaller ground clearance (below 110mm) results in better high-speed stability but poorer passing ability. If you frequently drive on mountain roads, choose a car with higher ground clearance; if you mainly drive on city roads or highways, a car with lower ground clearance is sufficient.
16
0
Share

What does the yellow exclamation mark on the Vezel dashboard mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or fault in the corresponding system. There are many indicator lights on the car dashboard with exclamation marks, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed introduction to the exclamation mark warning lights: General Faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Main issues include parking sensor faults, fuel cutoff system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to go to a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. The transmission oil should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a warning for the brake system, mainly indicating a brake system fault or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Abnormal Tire Pressure: A horizontal line with parentheses and an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in the car lights. Solution: Go to a 4S shop for inspection as soon as possible, or check it yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the problem. In addition, during daily use of the vehicle, the fault lights displayed on the vehicle dashboard are divided into two different colors: yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the corresponding repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. In this case, do not continue driving. Pull over immediately and call for professional help to prevent unpredictable dangers to the vehicle and personal safety from forced driving. It should be noted that when the car is started, all lights will turn on, and the system will perform an automatic check. After the check is completed, they will automatically turn off. If a light does not turn on when the ignition is switched on, remains on without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for car inspection to eliminate potential safety hazards.
13
1
Share

Why does the MG 3 experience acceleration hesitation?

The reasons for acceleration hesitation in the MG 3 may include high-voltage misfire, dirty throttle, insufficient oil pressure, or clogged fuel injectors. Transmission contamination: Transmission jerking or hesitation often occurs not due to internal valve body damage, but because of stubborn dirt and impurities inside, especially when these contaminants accumulate in the valve body, forming blockages that prevent effective regulation of oil pressure, leading to hesitation, jerking, or slipping issues. The traditional solution currently is to replace the transmission fluid. Throttle blockage: The engine's intake system: besides fuel, the engine also requires air. If components like the air filter or throttle become clogged or malfunction, resulting in insufficient air intake, the car may experience weak acceleration, slow speed increase, and a sense of hesitation. The ignition system should not be overlooked either; if spark plugs misfire, leak, or fail to atomize properly, it can also affect engine acceleration.
13
2
Share

Why can't the Nissan Livina key be turned?

Nissan Livina key may not turn because the steering wheel is locked. Solution: Slowly turn the ignition switch while simultaneously turning the steering wheel until the steering unlocks, then you can restart the ignition. Replacing the key battery: Gently press the small switch on the back of the key to remove the mechanical key, open the key compartment cover, and then you can see the position of the old battery. Ensure the new battery is placed with the positive side up, reinstall the key cover and mechanical key, and confirm the key functions properly. Car remote control: In addition to controlling the opening and closing of the car doors, the car remote control can also operate the windows and the trunk. These two functions are also quite commonly used in daily life. When you want to increase air circulation inside the car for ventilation or to remove odors, you can simply use the remote to roll down the windows.
12
2
Share

What Causes the Lack of Network in Exeed Cars?

Exeed cars may experience a lack of network due to module damage or wiring issues. Solution: Disconnect the negative terminal of the car battery, unplug the onboard wireless communication module connector (located under the seat). Press the clip while pulling to make it easier to remove. Wait for more than ten minutes before reconnecting it, then reconnect the negative terminal of the car battery, start the car, and turn the steering wheel left and right. Reasons for No Network in Cars: Poor signal in the current location. If the mobile network signal is weak where the vehicle is located, the car's infotainment system may fail to connect to the network. Try moving the vehicle to an open area and check if the network connects successfully. Out of data balance. An unpaid data card can lead to SIM card deactivation. Check the balance of the data card via the client app and recharge it promptly if necessary. Incorrect network connection settings in the infotainment system. Verify the network connection settings in the infotainment system to ensure they are configured correctly.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.