How to Reset the Maintenance Reminder for Mazda Axela?

[DiGia]

To reset the maintenance reminder for Mazda Axela, follow these steps: 1. Press the one-touch start button of the Axela; 2. Press the info button on the left side of the multifunction steering wheel; 3. Press the set button on the right side of the steering wheel; 4. Press the off button at the lower right of the steering wheel to complete the reset. The Mazda Axela has a body length, width, and height of 4662mm, 1797mm, and 1445mm respectively, with a wheelbase of 2726mm and a fuel tank capacity of 50 liters. The Mazda Axela is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 117PS, a maximum power of 86kW, and a maximum torque of 148Nm, paired with a 6-speed manual transmission.

[VanLeo]

Last time I reset the maintenance reminder light on my own Mazda Axela after servicing, and the method was actually quite straightforward. First, turn the car key to the off position to completely shut down the engine; then press and hold the trip button on the dashboard—usually the Trip button near the steering wheel; without releasing the button, turn the key to the ON position to illuminate the dashboard lights without starting the engine; continue holding the button for about five or six seconds until the small wrench icon on the screen flashes or disappears; then release the button. Remember to start the car to confirm the reminder is gone—that’s how you know it was successful. If you skip this step, the system will keep nagging you about maintenance even though you just changed the oil, which is a waste of money and affects your driving mood. I’ve done this multiple times—it’s simple and takes about 10 minutes. If you’re unsure about the button’s location, checking the manual is safer, as there might be slight differences between model years. In short, DIY resetting can save you a lot of hassle.

[Rylee]

To reset the maintenance reminder for the Mazda Axela, follow these steps carefully. First, turn off the engine and ensure the car is stationary. Then, locate the trip button on the dashboard. Press and hold it while turning the key to the ON position. Keep holding the button for about 5-7 seconds until the light flashes, indicating a reset. Release the button and start the car to verify. It's a simple process, but don't skip any steps or rush it—if you release the button too soon, you may need to try again. I recommend resetting it every six months during maintenance to avoid distracting alerts or incorrect maintenance schedules. Once, I forgot to reset it, and the system falsely prompted an early oil change, costing me an extra 200 yuan. Paying attention to these details can extend your car's lifespan, especially for beginners practicing car care. Remember, the button's location is detailed in the owner's manual.

[JocelynDella]

To reset the Mazda Axela maintenance reminder, the core process involves button operations on the instrument system. Turn off the engine; press and hold the Trip button; turn on the ignition without starting the engine; hold for a few seconds until the warning light goes off. If successful, start the car without any reminder and you're done. The whole process is basic yet practical, just like operating phone settings. I recommend owners keep the manual handy to check button positions and avoid accidentally triggering other functions. Failing to reset promptly may cause sensor misreporting, leading to unnecessary repair costs. This simple DIY saves time.