···
Log in / Register

How to reset the maintenance reminder for K3?

3 Answers
DiIsabel
08/28/25 7:12am
k3 reset the maintenance reminder method is: 1. Turn the power to ON mode; 2. Press the toggle button on the steering wheel to switch to user settings, where you can see the maintenance settings; 3. Enter the maintenance settings, long press the OK button to reset the maintenance mileage. The K3 body dimensions are: length 4660mm, width 1780mm, height 1450mm, wheelbase 2700mm, fuel tank capacity 53L, curb weight 1265kg. The K3 is equipped with a 1.4L turbocharged engine, maximum horsepower 130ps, maximum power 96kw, matched with a 7-speed dual-clutch transmission.
Was this review help?
6
5
Share
Clayton
09/10/25 5:25am
I'm the kind of person who enjoys DIY car maintenance, and resetting the maintenance reminder on a Kia K3 is actually quite simple. Generally, you'll need to first turn off the engine, make sure it's completely shut down, then press and hold the "SET" button on the steering wheel or a specific button on the center console. Next, turn the key to the ON position without starting the engine, wait a moment, and the maintenance light should blink and then turn off. If it doesn't work, check the owner's manual or online tutorials, as the steps might vary slightly for different model years. I'd suggest trying this method first before rushing to a repair shop—doing it yourself can save you some money. Also, after the maintenance reminder disappears, remember to service the engine on schedule to extend your car's lifespan and prevent minor issues from turning into major problems. Regular check-ups can also improve fuel efficiency, which is good for your wallet.
Was this review help?
11
2
Share
Expand All
KhloeMarie
10/24/25 6:16am
Having driven for many years, the Kia K3 maintenance reminder reminds me of the importance of safety first. The steps to clear it are straightforward: sit in the car without starting the engine, locate the prompt message on the dashboard, use the steering wheel buttons to enter the settings menu, and select 'Reset Maintenance.' Follow the prompts, and it usually takes just a few seconds. If the reminder keeps popping up, it might be a sensor issue that needs checking. I believe this system is designed to remind us to change the oil and filters regularly, keeping the engine running smoothly and avoiding dangerous situations like breakdowns. After clearing it each time, I note down the maintenance date to build the habit—safe driving starts with daily routines.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

Which country currently manufactures Land Rover vehicles?

Land Rover is a British SUV manufacturer, with most of its models produced in the UK. However, some Land Rover models are also manufactured domestically in China. The Land Rover Group is the largest automobile manufacturer in the UK. Current Land Rover models include: Range Rover Sport (classified as a mid-to-large-size SUV) - a large luxury vehicle; Range Rover (mid-to-large-size SUV); Range Rover Velar (mid-size SUV); Range Rover Evoque (compact SUV); Defender (mid-size SUV). The Land Rover Defender is a mid-to-large-size SUV. The dimensions of the Range Rover are: length 4950mm, width 2191mm, height 1863mm, with a wheelbase of 2880mm. The front track is 1629mm and rear track is 1626mm. The Range Rover seats 5 passengers and has 5 doors. It is equipped with two engine options: a 5.0L supercharged engine producing maximum power of 375kW and torque of 625Nm, and a 5.0L naturally aspirated engine with maximum power of 276kW and torque of 510Nm.
10
3
Share

What Causes the Car Lights to Keep Flashing?

The reasons for car lights continuously flashing are: 1. The hazard light switch is turned on; 2. Partial circuit failure connected to the vehicle's computer, bulb or ignition coil failure, stabilizer malfunction; 3. Poor wiring contact causing a short circuit, resulting in continuous light flashing; 4. The vehicle computer activates the recognition system for the anti-theft chip; 5. Insufficient battery power alerts the owner through flashing lights when the battery is low; 6. Brake system failure causing the tail lights to flash continuously; 7. The steering wheel is locked when parked, and the car activates the anti-theft function. Car lights are primarily used for daily, nighttime, and poor visibility conditions to provide illumination and warn other vehicles, ensuring driving safety.
14
4
Share

What Causes Excessive Tire Pressure?

The reasons for excessive tire pressure are: 1. Over-inflation of tires leading to high pressure; 2. Hot weather causing gas expansion and increased pressure; 3. Prolonged driving generating friction heat, resulting in higher pressure; 4. Aging and wear of suspension components related to wheels causing misalignment, uneven wear, increased temperature, and higher tire pressure. Effects of excessive tire pressure: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Steering wheel vibration and deviation, decreasing driving comfort; 3. Accelerated wear of central tread patterns, shortening tire lifespan; 4. Increased vehicle vibration, indirectly affecting other components' longevity; 5. Excessive stretching deformation of tire cords, reduced elasticity, and increased load during driving; 6. Decreased resistance to punctures.
8
4
Share

How to Remove the Side Mirror of the New X-Trail?

The steps to remove the side mirror of the new X-Trail are: 1. Press down the head of the mirror to tilt the tail upward, then grasp the tail and pull outward to remove the mirror; 2. After removing the mirror, unplug the wire connector of the mirror heating element, and manually connect the metal buckle on one end of the heating wire; 3. Connect the metal buckle to the slot on the top of the black plastic holder on the back of the mirror, then place the wired mirror back into the mirror housing, adjust its position, and press it firmly; 4. Unscrew the screw at the bottom of the mirror and the screw beneath the middle component of the mirror; 5. Remove the hidden screw and take off the middle component to complete the entire disassembly process.
5
1
Share

How to Turn Off the Auto Start-Stop Function on the Qashqai?

The method to turn off the auto start-stop function on the Qashqai is: 1. Start the vehicle's power; 2. Locate the engine start-stop control button; 3. Press the button marked with an 'A' to deactivate the engine start-stop function. Taking the Qashqai 2021 2.0L CVT Smart Edition as an example, its body dimensions are: length 4401mm, width 4401mm, height 1593mm, with a wheelbase of 2646mm and a fuel tank capacity of 57 liters. The Qashqai 2021 2.0L CVT Smart Edition is equipped with a 2.0L 151 horsepower L4 engine, delivering a maximum horsepower of 151hp, a maximum power of 111kW, and a maximum torque of 194Nm.
15
3
Share

What is the reason for jerky acceleration and inability to increase fuel during cold start?

The reasons for jerky acceleration and inability to increase fuel during cold start are: 1. Excessive carbon buildup on the throttle valve and air flow meter, which can cause jerky acceleration and inability to increase fuel when pressing the accelerator; 2. Too much carbon deposit in the combustion chamber of the cylinder. The combustion chamber has a certain adsorption effect on gasoline, and excessive carbon deposits prevent normal adsorption of gasoline, thus prolonging the ignition start time; 3. Lean mixture causing insufficient gas thrust on the piston after ignition, prolonging combustion time and leading to engine overheating; 4. Intermittent operation of the engine due to high and low voltage component and circuit faults in the ignition system, resulting in discontinuous high-voltage sparking and causing weak acceleration.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.