How to reset the maintenance reminder for GAC Trumpchi GS8?

1 Answers
DiSarah
07/29/25 11:36pm
The method to reset the maintenance reminder for GAC Trumpchi GS8 is: 1. Turn off the ignition switch, then press and hold both arrow buttons simultaneously and turn on the ignition switch; 2. After about 3 seconds, release the two arrow buttons, and the maintenance menu will appear, asking whether to reset; 3. Press and hold the SET button for more than 3 seconds, press the MODE button, and then turn off the ignition switch to complete the reset. Taking the 2021 GAC Trumpchi GS8 as an example, its front suspension is a MacPherson independent suspension, the rear suspension is a multi-link independent suspension, equipped with a 2.0T turbocharged engine, with a maximum horsepower of 252 PS, a maximum power of 185 kW, a maximum torque of 390 Nm, matched with a 6-speed automatic transmission.
Was this review help?
1
2
Share
More Forum Discussions

How to Set Up One-Touch Power Window Operation for Mazda?

Pull the switch up to the first position and hold it until the window moves to the desired position. Pulling the switch up with more force will reach the second position, at which point the window will fully open. Press and hold the lock button for 3 seconds to automatically raise all window glasses, or press and hold the unlock button for 3 seconds to automatically lower all window glasses.
19
2
Share

How to Get a New Remote Key for a Sedan?

You can go to a 4S shop or a professional car locksmith company to get one. Each remote key has a "code," which is also stored in the car's anti-theft system. To program a new remote key, it needs to be matched with the "code" in the original car. Once the matching is completed, the new remote key can be activated.
1
4
Share

What to do if the driver's license has been expired for 3 months?

Make sure to handle all traffic violation records. Go to a qualified medical examination institution or the medical examination room within the vehicle management office for a physical check-up. The examination content is very simple, with two methods available: manual and machine-based. Apply through the "Traffic Management 12123" app.
9
1
Share

How to Connect a Car Audio Cable?

First, prepare the connecting cable and connect one end of the AUX cable to the car's AUX interface. Then, connect the other end to the headphone jack of the audio device to complete the connection. Finally, adjust the input mode of the car audio system to AUX, and you can directly input the audio played by the audio device into the car audio system.
4
4
Share

How to Solve the Whistling Sound of Suzuki UY125?

When using full synthetic oil, the noise may become louder. Avoid excessive speed, and slightly easing off the throttle after exceeding 40 km/h can help reduce the noise. Many motorcycles experience changes in sound as the engine oil viscosity thins after warming up. Adjusting the valve clearance may alleviate this issue, but it could potentially result in reduced power output.
6
2
Share

How to Replace a Car Tire?

Check for tire issues to identify which tire has a problem, then remove the wheel. Use a tire changer to separate the tire from the rim. After removing the old tire, mount the new tire onto the rim in the correct direction. Secure the partially installed tire on the tire changer using the same method. Install the wheel with the new tire onto the hub, tighten the bolts, adjust the tire pressure, reset the tire pressure monitoring system, and finally conduct a test drive.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.