How to reset the maintenance reminder for Elantra?

1 Answers
DeJonathan
07/30/25 10:03am
The method to reset the maintenance reminder for Elantra is: Press the maintenance light reset button located in the middle of the three buttons on the lower right side of the odometer. The maintenance reminder information will display a small wrench and text message on the central screen of the instrument panel. The vehicle's computer calculates and displays the remaining maintenance time based on the parameter values set in the system. Once the actual mileage or days reach the set parameter values, the maintenance reminder message will appear every time the ignition switch is turned to the ON position. The Elantra is a mid-size sedan under Beijing Hyundai, with dimensions of 4610mm in length, 1800mm in width, and 1450mm in height, and a wheelbase of 2700mm. The car adopts the Fluidic Sculpture 2.0 design concept, incorporating Low Wide design elements to create a distinctive front face style, while the long hood design brings a sporty, coupe-like dynamic feel.
Was this review help?
14
5
Share
More Forum Discussions

The Simplest Method to Increase Power for the Mark X?

Methods to increase power for the Mark X include lowering the intake air temperature, among others. Below are specific methods for enhancing the power of the Mark X: 1. Lowering the intake air temperature: The principle behind lowering the intake air temperature is that cold air is denser. Under the same volume, more mass of air will be drawn into the engine cylinders to mix with fuel, allowing the fuel to burn more completely. Complete combustion can result in greater energy output. 2. Upgrading to a larger exhaust pipe: This is one of the most common methods to boost power. Replacing the exhaust pipe with one that has a larger diameter and faster flow rate improves the smoothness of exhaust gas expulsion and also enhances the exhaust sound. 3. Replacing the spark plugs: Most vehicles use a distributorless high-voltage ignition system, where the output voltage of the ignition coil exceeds 100KV. However, due to energy loss in the high-voltage wires and spark plugs, the actual voltage used for ignition is only 20-50KV. Therefore, to reduce energy loss in the ignition system, using high-energy, stable spark plugs can improve power.
3
3
Share

What is the bulb model for the Changan CS55 headlights?

The bulb model for the Changan CS55 headlights (high beam) is H1/55W. Other bulb models are: low beam H7/55W, brake light P21/5W, turn signal 1121/21W, parking light T10/5W, and fog light H3/35W. Method for replacing the headlights of the Changan CS55: Open the engine compartment cover and note the bulb model indicated on the lower part of the headlight's outer glass. Unscrew the headlight cover, keeping in mind that the removal method may vary slightly depending on the vehicle model. Firmly pull out the lamp holder with the power cord, making sure to hold the headlight with your hand during the process to avoid damage. Release the lamp holder's retaining clip to remove the bulb, then install the new bulb. Reassembly is the reverse of the disassembly process. Ensure the dust cover is properly tightened when reinstalling to protect the headlight from rain and dust.
6
1
Share

What are the consequences of not handling motorcycle traffic violations?

The consequences of not handling motorcycle traffic violations include incurring late fees and carrying over penalty points to the next scoring cycle. Below are the relevant details: 1. Incurring late fees: Failure to pay the fine will result in late fees. According to the 'Procedures for the Handling of Road Traffic Safety Violations,' if the fine is not paid by the due date, an additional 3% of the fine amount will be charged daily, with the total additional fine not exceeding the original fine amount. The maximum additional fine can be up to double the original fine. 2. Carrying over penalty points to the next scoring cycle: Additionally, as stipulated in the 'Implementation Regulations of the Road Traffic Safety Law,' if a motor vehicle driver's penalty points within a scoring cycle do not reach 12 points and the imposed fine has been paid, the penalty points will be cleared. However, if the penalty points do not reach 12 points but the fine remains unpaid, the penalty points will be carried over to the next scoring cycle.
12
5
Share

Does the Haval M6 have one-touch window lift function?

Haval M6 has one-touch window lift function. Generally, mid-to-high-end models are equipped with one-touch window lift function, mainly for the convenience of the driver and passengers, and to avoid the driver being distracted by operating the windows, thereby improving safety. Anti-pinch function: One-touch window lift usually has an anti-pinch function, otherwise it may pose a risk of pinching hands. Only the driver's seat has one-touch window lift, which is designed with safety considerations in mind. How to use the one-touch window lift function: When using it, you need to hold down the switch, and release the button when the window reaches the desired position, stopping the lifting process. Cars equipped with one-touch window lift have two levels of window lift control switches. The first level is the same as ordinary electric windows. The second level is that after pressing and releasing, the window will automatically fully open or fully close.
6
0
Share

How to Use the Nissan Sylphy Dash Cam?

Simply press and hold the power button to turn the device on or off. After powering on, it will automatically enter recording mode, indicated by a flashing recording symbol light. Pressing the OK button will stop the recording. Below are specific details about the Sylphy: 1. Body Dimensions: The Sylphy is a sedan series launched by Dongfeng Nissan Passenger Vehicle Company in 1959. It measures 4641mm in length, 1815mm in width, and 1447mm in height, with a wheelbase of 2712mm. It features front-engine, front-wheel drive, a 47L fuel tank capacity, and standard seating for five. 2. Powertrain Configuration: Equipped with a 1.6L HR16DE engine, it incorporates an all-aluminum cylinder block, true round machining process (F1 engine technology), reverse intake and exhaust layout, ultra-thin silent timing chain, CVTV continuously variable valve timing, double overhead camshafts, 16 valves, and platinum spark plugs. Maximum power output is 80KW with peak torque of 153NM.
5
1
Share

What is a CASE excavator?

CASE refers to Case excavators. Here is some extended information about Case excavators: 1. Case Mini Excavators: Case mini excavators deliver efficient power to enhance productivity and shorten work cycles. Featuring a center-mounted independent swing boom, they enable easy rotation and close-to-obstacle digging. Case's maintenance-friendly design and full-view inspection features allow operators to return to work faster. 2. Case Crawler Excavators: The Case CXB series excavators boast high work efficiency, PCS hydraulic control systems, and quiet operation. Case hydraulic excavators excel in fuel economy, significantly increasing output during faster work cycles. 3. Case Backhoe Loaders: Combining power and functionality, Case backhoe loaders achieve speeds of nearly 40 km/h with 110HP engines. With over 25 work attachments available for both the digging and loading ends, they cater to diverse industry needs including municipal pipelines, road maintenance, construction demolition, landscaping, oilfield facilities, and national defense applications.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.