How to reset the maintenance reminder for Citroen C5?

2 Answers
VonJeffrey
07/29/25 5:36am
Citroen C5 maintenance reset method: 1. Turn off the ignition switch of the C5; 2. Press and hold the "CHECK" maintenance mileage reset button; 3. Turn on the ignition switch, and you will see the odometer start counting down; 4. When the display shows "Initialization completed" or "Equal to 0", you can release the button, and the maintenance indicator light will be successfully reset. The Citroen C5 is a model under Dongfeng Citroen, with body dimensions of 4825mm in length, 1860mm in width, and 1480mm in height. In terms of appearance, the Citroen C5 features a smooth arc running from the engine hood to the rear of the car, and from the A-pillar to the C-pillar, combined with a slightly raised waistline, giving it a very streamlined look from the side.
Was this review help?
1
1
Share
SophieFitz
08/12/25 9:10am
I've been driving my Citroen C5 for over a decade, and resetting the maintenance reminder is actually quite common. After turning off the ignition, hold down the "Trip" or mileage reset button on the dashboard without releasing it, then turn on the ignition without starting the engine. Keep holding for about 10 seconds until the small wrench maintenance indicator light goes off before releasing. The whole process is simple and can be done at home without spending money at a repair shop. The key is to reset it immediately after maintenance, otherwise the next maintenance reminder will be messed up, and missing the timing could harm the engine. My suggestion is that the specific steps are written in the maintenance manual, but the reset procedure for the C5 is basically this set of operations, applicable to both old and new models.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What is the penalty for not wearing a seat belt in the co-driver seat of a large truck?

For any passenger not wearing a seat belt in the co-driver seat, traffic police on duty can impose a fine. Below are some precautions for safe driving: 1. Accelerate when changing lanes: Under normal road conditions, it is common for novice drivers to brake suddenly and then slowly change lanes. This behavior is highly likely to cause accidents, or at least lead to immediate traffic congestion. After turning on the turn signal, identify a safe gap, slightly accelerate while turning the steering wheel to change lanes, and try to maintain a speed about 10KM/h faster than the vehicle behind to avoid the latter from reacting too late. 2. Check the rearview mirror when braking: Nowadays, vehicles on the road are often close to each other. When braking, also pay attention to the distance of the vehicle behind. If the distance is too close and there is still some space between you and the vehicle in front, slightly release the brake to avoid a rear-end collision. 3. Cornering technique: Slow down before the curve, accelerate halfway through the curve, ensuring both speed and stability. Avoid entering the curve too quickly and then braking suddenly.
18
2
Share

What is the fuel consumption of the Kawasaki 400?

The fuel consumption of the Kawasaki 400 is approximately 4L. The specific fuel consumption depends on the condition of the motorcycle. If the condition is poor, the fuel consumption will increase. Below are detailed introductions about the Kawasaki 400: 1. Kawasaki 400: The Kawasaki 400 is a road motorcycle and is a preferred choice for many motorcycle enthusiasts. The Kawasaki 400 excels in appearance, featuring an LED headlight on the front, which makes its design look much softer compared to the previous generation. 2. Design: The headlight of this motorcycle is divided into three sections, with inverted triangular positioning lights on both sides. The high beam converges towards the center when lit, illuminating in a fill-light manner. The turn signals use halogen bulbs and are designed to be very flat, seamlessly integrating with the body. For the taillight, it adopts the design of the WSBK champion ZX-10R, featuring a multi-faceted three-dimensional design that offers high visibility when lit at night. In terms of power, this motorcycle is equipped with a water-cooled, four-stroke, DOHC parallel-twin engine with a displacement of 399cc, making its performance among the top in its class.
9
4
Share

What are the body dimensions of the Audi A4L?

Audi A4L has a length, width, and height of 4858mm × 1847mm × 1439mm, with a wheelbase of 2908mm. Below is some knowledge about the configuration and advantages of the Audi A4L: Configuration of the Audi A4L: This car offers two powertrain options, equipped with a 1.4T and a 2.0T turbocharged engine respectively. The 1.4T engine delivers a maximum power of 110kw and a maximum torque of 250 Nm, while the 2.0T engine provides a maximum power of 140kw and a maximum torque of 320 Nm. Additionally, the high-end model of this car is equipped with a four-wheel-drive system. Advantages of the Audi A4L: The Audi A4L features a completely new exterior and chassis design, both front and rear, resembling the Audi A5. It has a stylish and dynamic appearance with smooth lines; the interior boasts exquisite craftsmanship and excellent configuration; the sound system is of high quality; the space is spacious and practical, offering great comfort; and it carries a classic brand reputation.
12
0
Share

How to Renew a Driver's License That Is About to Expire?

If your driver's license has expired, you should apply for a renewal at the vehicle management office of the place where the license was originally issued as soon as possible. The reasons are: 1. Continuing to drive with an expired license will be treated as driving without a license. 2. According to relevant regulations, the driver should apply for a renewal at the vehicle management office of the place where the license was issued within 90 days before the expiration date. Additional information: Some details about driver's license management are: 1. Renewal: To renew a driver's license, citizens need to bring two copies of their ID card, two recent 1-inch color photos without a hat, the original ID card, the original driver's license, and a medical examination certificate from a county-level or above hospital to the vehicle management office. After filling out the "Motor Vehicle Driver's License Application Form," they can renew the license for free. 2. Replacement: Citizens who need to replace a lost driver's license should also bring the above materials to the vehicle management office and fill out the "Motor Vehicle Driver's License Application Form" and the "Motor Vehicle Driver's License Replacement Application Form." After paying the replacement fee, they can receive a new version of the driver's license.
7
0
Share

Location of 8 Speakers in Tiggo 8 Plus?

Tiggo 8's speakers are installed on the dashboard, left and right front doors, left and right rear doors, and left and right C-pillars. Car speakers, commonly known as car horns, are an indispensable and important component of an audio system. Below is an introduction to car audio: 1. Introduction to Car Audio: As the only device that converts electrical energy into sound energy, the quality and characteristics of car speakers play a decisive role in the sound quality of the entire audio system. Due to the special nature of cars, it is not possible to install universal speakers like those in home theaters inside the car. Instead, individual car speakers are directly installed in the car. A high-end car can even have more than ten car speakers installed. 2. Speakers: Speakers include bass units, midrange units, and treble units. Most cars today use coaxial speakers. The actual power of a speaker is not necessarily greater just because its nominal power is higher. To produce perfect music, a perfect match between the amplifier and the speaker is required. 3. Installation Techniques: By understanding the attributes, uses, categories, compatibility, and characteristics of car speakers, along with correct installation experience and techniques, the installation positions of speakers with different frequency ranges can be properly handled. Maintaining good directivity and making technical adjustments with compatible power amplifiers can ultimately achieve excellent results.
19
0
Share

What Are the Consequences of Leaving Car Doors Unlocked Overnight?

The consequences of leaving car doors unlocked overnight are: the battery may be depleted, as many areas inside the car are equipped with sensors that are powered by the battery. If the car is not locked, it will not stop working, and more sensors will remain active, consuming more power. Here is some relevant information: After the car is turned off: the power is not completely cut off. Devices such as the anti-theft alarm and warning lights continue to operate. Additionally, many parts of the car have sensors, all of which are powered by the battery. If the car is not locked, it will not enter sleep mode, resulting in more sensors remaining active and consuming more power. Leaving the car doors unlocked after turning off the engine may cause exhaust fumes to accumulate and enter the car through the air intake vents. The car is not completely airtight, and the exhaust gases can seep in through small gaps or holes, leaving unpleasant odors inside the car while also producing many harmful substances and gases. Turn off all devices: Before parking and turning off the engine, make sure to turn off all electrical devices such as lights, air conditioning, reading lights, and windows. Since the engine stops generating electricity after being turned off, closing windows and other electrical devices at that time will overload the battery. Always ensure the car doors are properly closed when locking the car, otherwise, it will increase the car's power consumption. In severe cases, the battery may be completely drained overnight.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.