···
Log in / Register

How to Reset the Maintenance Reminder for BYD Qin?

4 Answers
DeSawyer
09/03/25 7:32am

The method to reset the maintenance reminder for BYD Qin is: 1. Under the menu interface of the central dashboard display, use the scroll wheel on the right side of the steering wheel to short press and select the driving information interface; 2. Navigate to the maintenance information interface, then long press the scroll wheel for more than 2 seconds to reset the maintenance information, thereby clearing the maintenance reminder. The maintenance light is a reminder function set by the manufacturer based on specific mileage or time intervals, appearing as dashboard/screen messages or indicator lights to prompt owners for scheduled maintenance. BYD is a Chinese automotive brand, with product lineups including BYD Qin, All-New Tang, All-New Song, BYD F3, etc. Taking BYD Qin as an example, its body dimensions are 4675mm in length, 1770mm in width, and 1500mm in height, with a wheelbase of 2670mm.

Was this review help?
17
4
Share
SanWalter
09/16/25 2:08am

I've been driving my BYD Qin for over three years now, and whenever the maintenance reminder light comes on, I've always reset it myself—it's both cost-effective and convenient. Here's how I do it: First, without starting the engine, just turn the power to the ACC position. At this point, the dashboard will display the reminder message. Then, locate the multifunction button on the steering wheel, usually the one with an OK or enter symbol. Press and hold it firmly for about 5 to 10 seconds without releasing until the screen flashes or a message pops up indicating a successful maintenance reset, meaning the light is off. The process is straightforward, but be careful not to do it while driving to avoid distraction. After resetting, I always jot down the latest maintenance date in my phone's notes to ensure timely servicing and not miss the next reminder. Trying it yourself gives a sense of accomplishment, but if you're unsure about the button's location, check the owner's manual first to avoid pressing the wrong button and triggering a false alarm. In short, maintaining good servicing habits keeps your car running longer and more reliably.

Was this review help?
8
3
Share
Expand All
LeAubrey
10/30/25 2:42am

As a tech-savvy car enthusiast who loves tinkering with vehicles, I've discovered several methods to eliminate the maintenance reminder on the BYD Qin, with the core approach involving operations through the instrument cluster menu. Typically, with the power switched to ACC mode, press the left steering wheel button to enter the settings menu, select the vehicle information or maintenance option, and locate the maintenance reminder reset function to execute it. Some newer Qin models even support remote operation via a mobile app connected to the car's system, which is quite intelligent. However, I always ensure the car is parked safely before performing any operations and recommend beginners to first watch tutorial videos on YouTube for practice to avoid issues. After clearing the reminder, don't become complacent—regularly check the engine oil and filters, as the absence of a reminder doesn't mean the car is problem-free. This approach not only enhances technical skills but also makes daily driving more carefree.

Was this review help?
17
4
Share
Expand All
JuliannaAnn
12/13/25 2:49am

Having driven for a lifetime, when dealing with the maintenance reminder for my BYD Qin, I always prefer to go to a nearby 4S shop or repair shop and let professionals handle it. They know all the details and can turn off the light in just a few seconds. Although you might manage it yourself with some combination of button presses, if you accidentally press the wrong buttons or can't remember the menu location, not only might you fail to turn off the light, but you could also cause more trouble and potentially affect the system's alarm function. The maintenance reminder is a good mechanism that helps you remember when to change the oil and perform maintenance, which can extend the engine's lifespan. I suggest simply letting the technician reset it during the maintenance service—it's both convenient and safe. Regular vehicle maintenance is key; don't neglect it just because you're too lazy to visit the shop. After all, preventing problems is much better than spending a fortune fixing them later.

Was this review help?
14
1
Share
Expand All
More Forum Discussions

Should the car air conditioning AC be turned on in winter?

In winter, the car air conditioning AC should not be turned on. AC is the cooling option of the air conditioning system, and it is unnecessary to use it in winter. Simply turning on the heater is sufficient. Activating the AC means the air conditioning compressor is engaged, which initiates the cooling process, so it should not be used in winter, and cold air should definitely not be turned on. The car air conditioning system, abbreviated as car AC, is designed to regulate and control the temperature, humidity, air cleanliness, and airflow within the car cabin to optimal conditions. It provides a comfortable riding environment for passengers, reduces travel fatigue, creates favorable working conditions for the driver, and plays a crucial role in ensuring safe driving as a ventilation device.
17
1
Share

Can you make a U-turn within the left-turn channelizing line?

U-turns are not allowed within the left-turn channelizing line. The channelizing line typically consists of one or several white V-shaped lines or diagonal stripes set according to the intersection terrain, indicating that vehicles must follow the prescribed route and are not allowed to drive over or cross the line. It is mainly used for wide, irregular, or complex intersections, ramp entrances of interchanges, or other special locations. The purpose of setting the channelizing line is to ensure that every vehicle can 'stay in its lane,' serving to regulate, guide, and warn traffic, thereby reducing accidents. The channelizing line is a type of prohibited marking, and vehicles must follow the designated route and are not allowed to make U-turns or park arbitrarily within the channelizing line area.
13
1
Share

How to reset the engine fault light on a 307?

307 engine fault light reset method is: Use a dedicated OBD diagnostic tool to check the fault codes. If it's an intermittent fault code or caused by power interruption, simply reset it directly. If there's a fault code indicating an issue with a specific sensor or assembly, it's recommended to perform repairs. An engine is a machine capable of converting other forms of energy into mechanical energy, originating in the UK. It can refer to either the power generation device or the entire machine including the power unit (such as gasoline engines, aircraft engines). Types include internal combustion engines (gasoline engines, etc.), external combustion engines (Stirling engines, steam engines, etc.), and electric motors.
20
3
Share

What are the symptoms of a bad ignition coil?

Ignition coil failure symptoms include: 1. Noticeable body vibration at idle; 2. When observing the exhaust pipe outlet, there's obvious intermittent exhaust gas flow with severe pipe vibration, accompanied by clear popping sounds. As gasoline engines evolve towards higher RPM, higher compression ratios, greater power, lower fuel consumption, and reduced emissions, traditional ignition systems no longer meet operational requirements. The core components of an ignition system are the ignition coil and switching device. By enhancing the ignition coil's energy output, the spark plug can generate sufficient spark energy - this constitutes the fundamental requirement for modern engine-compatible ignition systems.
17
4
Share

How Often Should the Transmission Fluid in a Volkswagen Be Changed?

Volkswagen transmission fluid is generally recommended to be changed every two years or approximately 40,000 kilometers. The replacement interval varies for different models. Below are the recommended intervals for changing transmission fluid. Manual Transmission: Manual transmission fluid is generally recommended to be changed every three years or approximately 100,000 kilometers. Automatic Transmission: Automatic transmission fluid is generally recommended to be changed every two years or approximately 40,000 kilometers. Continuously Variable Transmission (CVT): CVT fluid is generally recommended to be changed every two years or approximately 60,000 kilometers. The methods for changing transmission fluid are as follows: 1. Loosen the drain plug at the bottom of the transmission to drain the old fluid and then refill. 2. Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it removes deposits and impurities from the bottom of the oil pan. 3. Use a circulation machine to change automatic transmission fluid: A smart circulation machine performs dynamic fluid replacement, filtering and cleaning sludge and impurities inside the automatic transmission.
6
1
Share

What is the HOLD button in a car?

HOLD means to maintain. After pressing this button, the automatic transmission enters the hold mode, and the hold mode indicator light on the dashboard will illuminate. The HOLD button adjusts the optimal driving state according to different road conditions, effectively preventing the transmission from frequent shifting. During overtaking, it forces downshifting and prevents upshifting. The working principle of an automatic transmission is as follows: After the engine starts, the crankshaft drives the pump impeller to rotate through the flywheel. The centrifugal force generated by the rotation causes the working fluid between the pump impeller blades to be thrown from the inner edge to the outer edge. When the turbine speed is relatively low, the working fluid flowing out of the turbine moves backward and impacts the front of the stator blades. Since the stator is restricted by the one-way clutch and cannot rotate backward, the stator blades redirect the backward-flowing working fluid to push the pump impeller blades forward, promoting the rotation of the pump impeller and thereby increasing the torque acting on the turbine. As the turbine speed increases, the circumferential velocity becomes larger. When the resultant velocity of the tangential speed and circumferential velocity starts to point toward the back of the stator blades, the torque converter reaches the critical point. When the turbine speed further increases, the working fluid will impact the back of the stator blades. The HOLD function can be used in the following situations: Slippery roads: For example, starting on snow. Starting in snow with 2nd gear instead of 1st gear is more stable. When starting on snow, you can place the gear lever in position 2 and press HOLD, so the transmission will maintain the gear ratio of 2nd gear, making the start smoother. Continuous curve driving: When driving on continuous curves, the automatic transmission in normal mode may shift frequently due to the driver's control of the accelerator pedal. Pressing the HOLD button in D4 gear enters the hold mode, and the transmission will stay in 3rd gear, not only reducing transmission wear but also allowing the transmission to continuously output greater torque during driving, improving acceleration performance and making the ride smoother. Mountain roads or continuous slopes: Pressing the HOLD button in D4 or 2nd gear enters the hold mode. When going uphill, acceleration becomes more powerful. When going downhill, the drag is greater and safer, and it also avoids wear caused by frequent shifting of the transmission.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.