How to reset the maintenance reminder for Audi Q5L?
3 Answers
Audi maintenance is generally required once a year or every 10,000 kilometers. Automobile Maintenance: Automobile maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as automobile servicing. Audi Q5L Maintenance Items: Replace engine oil and oil filter, visually inspect the engine for leaks or damage, visually inspect all components related to exhaust emissions, check the exhaust system for leaks or damage, check the concentration of coolant/antifreeze, add coolant or adjust concentration if necessary, query the self-diagnosis system fault memory, check the thickness of brake friction linings, visually inspect the brake system for leaks or damage, check the brake fluid level based on the wear state of brake friction linings, visually inspect the transmission, final drive, and constant velocity joint boots for leaks or damage, check the steering ball joint dust boots for leaks or damage, check the tread depth and wear pattern of all tires, check tire pressure and adjust if necessary, check the battery electrolyte level and add distilled water if needed, check the steering tie rod end play, tightness, and dust boot condition, check the air reservoir and drain valve for cleanliness, clean if necessary, check and lubricate the function of door locks, safety locks, and child safety locks, check the function of lighting, turn signals, hazard warning lights, warning/indicator lights, and horn, check the function of windshield wipers/washers, headlight washers, washer nozzles, and the wiper stop position.
Clearing the maintenance reminder for the Audi Q5L, as a long-time Audi owner, I can share my experience. First, turn off the engine and all power sources. Then, locate a small button near the steering wheel on the dashboard, usually the trip reset or settings button. Hold it down and turn the car key to the second position—where the dashboard lights up but the engine doesn't start. You'll see the maintenance reminder or a similar message pop up on the screen. Continue holding the button for about 5 to 10 seconds until the reminder disappears or shows a successful reset, then release it. Once done, restart the engine to confirm the reminder is gone. Don’t forget, this procedure might vary slightly depending on the model year, so it’s best to check the user manual first. I do this regularly and find it quite convenient—no more annoying reminders, and clearing it promptly helps accurately track the next service to avoid costly repairs from neglected maintenance. Just be careful not to damage the button during the process to prevent extra hassle.
The method to reset the maintenance reminder for the Audi Q5L can be achieved quite simply, in my opinion. First, ensure the engine is turned off. Then, press and hold the trip reset button located on the instrument panel—it's tucked away below the left side of the steering wheel. Next, turn the key to the ON position without starting the engine. The service reminder will flash on the screen. Continue holding the button for about 10 seconds until the reminder disappears or the reset is complete. Once done, release the button and start the car to test. Having driven several models, I've noticed these procedures are quite similar, with Audi's design being particularly intuitive. A quick reminder: always ensure the maintenance work is completed before resetting. Otherwise, resetting without changing the oil or performing other necessary services might affect the vehicle's performance or sensors. Routine maintenance is crucial for any car. I recommend checking your vehicle every six months—developing good habits can significantly extend your car's lifespan. If you've misplaced the manual, searching online for model-specific steps can save both time and money.
