How to Reset the Maintenance Reminder for Aeolus Yixuan?

How to Reset the Maintenance Reminder Light on a Ford Focus?

Here are the steps to reset the maintenance reminder light on a Ford Focus: 1. First, press the vehicle's one-touch start button to start the engine. 2. Then, continuously press the SET button on the left side of the multifunction steering wheel. 3. Upon hearing a beep sound, press the OK button on the right side of the multifunction steering wheel to cancel the maintenance light reminder. Additional information about the Ford Focus is as follows: 1. The new Ford Focus adopts a fresh family design, featuring dual-tone 18-inch wheels and the SYNC3 multimedia system. It also comes with a newly designed rotary gear shift knob and a USB port on the interior rearview mirror for dashcam use. 2. In terms of powertrain, the new model is equipped with two engines: a 1.0T and a 1.5T. The 1.0T engine delivers a maximum power of 94kW, while the 1.5T engine offers a maximum power of 135kW. The transmission system includes an 8-speed automatic gearbox paired with the engine, providing three driving modes.

4

2

Share

Where is the Renault Air Conditioning Filter Located?

Renault's air conditioning filter is located inside the glove compartment on the passenger side. Below are the steps to replace the air conditioning filter: 1. Open the glove compartment on the passenger side; 2. Then release the plastic clip on the right side of the glove compartment; 3. Squeeze both sides of the glove compartment and remove it; 4. Pull out the old air conditioning filter; 5. Install the new air conditioning filter. Additional Information: 1. Renault cars are among the most exported vehicles to Germany. The new Renault Captur features a horizontally connected lower air intake on the front bumper, with newly added C-shaped daytime running lights on both sides. The tailgate lines have been adjusted, and it comes with black-background taillights and a slightly modified lower bumper. 2. In terms of power, the new car will continue to be equipped with the existing 1.2T engine, which has a maximum power of 116 horsepower, paired with a 6-speed dual-clutch transmission.

6

1

Share

Where is the engine number located on the Bora?

The engine number of the Bora is located on the front side wall of the engine block, below the front windshield, near the wipers. There is a small horizontal strip, and the engine number is found below the barcode on this strip. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It is used to represent information such as the manufacturer, specifications, performance, features, craftsmanship, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and multiple engines can share the same model. The engine number, however, refers to the production serial number of the engine. Each engine has a unique number, and no two engines share the same engine number. Composition of the vehicle engine number: First part: Includes the product series code, generation symbol, and regional or corporate code. Manufacturers may choose appropriate letters as needed, but these must be approved and recorded by the industry standard's regulatory body. Middle part: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear part: Composed of symbols for structural features and usage characteristics. Tail part: Distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same product series, the manufacturer selects an appropriate symbol. The rear and tail parts can be separated by a hyphen (-).

3

2

Share

How to Use the Cruise Control on Kia K5?

How to use the cruise control function on Kia K5: 1. Press the CRUISE button on the steering wheel to activate the cruise control system. 2. The cruise control indicator on the instrument panel will illuminate. Accelerate to the desired speed, which must be greater than 30 km/h (20 mph). 3. Move the lever downward (to SET-) and release it when the desired speed is reached. The cruise set indicator on the instrument panel will illuminate. 4. Release the accelerator pedal simultaneously, and the vehicle will automatically maintain this desired speed. Below is an introduction to the cruise control functions of the Kia K5: 1. ON/OFF button – Cruise control switch: Function one: When the ON/OFF button is pressed, the CRUISE/MAIN cruise main indicator above the coolant temperature gauge will illuminate. The cruise control system is activated and ready to receive various speed control operations. Function two: When the ON/OFF button is pressed again, the CRUISE/MAIN cruise main indicator above the coolant temperature gauge will turn off. The cruise control system is deactivated. 2. SET/COAST button – Speed setting/deceleration control switch (allowed when speed is greater than 30 km/h): Function one: When the SET/COAST button is pressed while driving, the current speed is set, and the CRUISE set indicator above the coolant temperature gauge will illuminate. Release the accelerator pedal, and the vehicle will drive at the set speed. Function two: During cruise control, pressing the SET/COAST button again will reduce the speed by 1.6 km/h each time. Function three: During cruise control, holding the button down will gradually decrease the speed.

10

4

Share

Can the BMW X5 be fitted with regular tires?

The BMW X5 can be fitted with regular tires, but it is essential to check the specifications of the wheel rims and ensure that the tires match the original vehicle specifications to prevent deviation in driving trajectory. The BMW X5 originally comes equipped with run-flat tires. If switching to regular tires, it is advisable to carry a spare tire as a precaution. Below are specific details about run-flat tires: 1. Run-flat tires, also known as zero-pressure tires, differ most significantly from regular tires in that their sidewalls are much thicker. 2. Run-flat tires consist of an outer tire, a standard inner tube, a spare inner tube, a steel rim, and a gas generator. 3. Run-flat tires have special symbols following the specifications on the tire sidewall, which regular tires do not have.

20

1

Share

What is the weight of the Volkswagen Lavida?

The weight of the Volkswagen Lavida varies from 1210-1290kg depending on the engine displacement. Below is an introduction to the Lavida: 1. As a new car tailor-made for Chinese consumers, the LAVIDA Lavida not only maintains the excellent quality of German design but also incorporates many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. 2. Produced by Shanghai Volkswagen, the Lavida embodies a new design DNA—fusion, while continuing the dynamic and stylish design language of the A-segment car market. 3. With its forward-looking design language, the Lavida injects more luxury and grandeur into the A-segment car market, rewriting consumers' traditional impressions of this segment and thus meeting more localized consumer demands. 4. The currently available Lavida models come with 1.6 and 2.0 engine displacements.

4

5

Share

How to Reset the Maintenance Reminder for Aeolus Yixuan?

How to Reset the Maintenance Reminder Light on a Ford Focus?

Where is the Renault Air Conditioning Filter Located?

Where is the engine number located on the Bora?

How to Use the Cruise Control on Kia K5?

Can the BMW X5 be fitted with regular tires?

What is the weight of the Volkswagen Lavida?

What is the total weight of the Corolla?

How to reset the maintenance light on the Emgrand GL dashboard?

How to Use the Cruise Control in the Nissan X-Trail?

What to Do When the Passat Key is Locked in the Trunk?