How to reset the maintenance reminder for a Polo car?
3 Answers
The method to reset the maintenance reminder for a Polo car is: 1. Turn off the ignition switch, press the clock adjustment button "SET" while turning on the ignition switch; 2. Release the "SET" button, then press the "SET" button once more; 3. Turn off the ignition switch, then turn it on again to check if the reminder has been reset. If not, the process must be repeated from the beginning. The Polo is a 5-door, 5-seat hatchback produced by SAIC Volkswagen. The car has a length of 4053mm, a width of 1740mm, a height of 1449mm, a wheelbase of 2564mm, and a fuel tank capacity of 42.5 liters. This model is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 83kW and a maximum torque of 145Nm.
I've been driving a Polo for over ten years, and resetting the maintenance reminder is quite common. The specific method is to turn off the car but don't start it, locate the small reset button on the dashboard, usually below the speedometer, press and hold it, then turn the key to the ON position (without starting the engine), and wait 5-10 seconds for the reminder to disappear. Remember one thing: make sure the maintenance has been done, such as an oil change, otherwise the reminder will pop up again soon after resetting, causing unnecessary trouble. Different model years of Polo might vary—older models use a physical button, while newer ones operate through the settings menu; just explore a bit. I think this function is a reminder for regular maintenance, and ignoring it can distract you and make driving unsafe. If you can't reset it, it might be a minor issue with the battery or a sensor, so I recommend taking the car to the shop for a check to avoid complications. I usually reset it immediately after maintenance to keep the car in good condition.
I find clearing the Polo's service reminder quite simple and fun. You just need to turn off the car, press and hold the dashboard reset button without releasing it, then turn the key to ON position (don't start the engine), and hold for a few seconds until the reminder disappears. This operation is based on the vehicle's computer system, which resets the counter through button signals, essentially telling the car 'maintenance is done'. It works for most Polo model years, but post-2015 models may require finding the reset option in the menu. Always check maintenance records before resetting - resetting without actual service may accelerate the next reminder. The service reminder is designed to protect the engine; ignoring it may lead to increased carbon buildup or higher fuel consumption. DIY reset saves money, but when in doubt, having a professional technician handle it with proper tools is more reliable.
