How to reset the maintenance reminder for a 2016 Roewe RX5?

2 Answers
VonEvan
09/01/25 6:57am
2016 Roewe RX5 maintenance reminder reset steps are as follows: 1. Turn off the ignition switch, press and hold both arrow buttons simultaneously, then turn on the ignition switch; 2. After approximately 3 seconds, release both arrow buttons, and the reset menu will appear, asking whether to reset; 3. Press and hold the SET (reset) button for more than 3 seconds, then press the MODE (mode) button; 4. Turn off the ignition switch to complete the reset. Below are some relevant details about the Roewe RX5: 1. The Roewe RX5 adopts the "Blue Core" high-efficiency power technology, equipped with 2.0T and 1.5T in-cylinder direct injection turbocharged engines. The 2.0T engine delivers a maximum power of 220 horsepower and a peak torque of 350 Nm, with a combined fuel consumption as low as 8.1L per 100 km; the 1.5T engine provides a maximum power of 169 horsepower and a peak torque of 250 Nm, with a combined fuel consumption of only 6.8L per 100 km. 2. The Roewe RX5 features a GKN intelligent all-wheel-drive system, fully independent suspension system, and a four-way high-speed CANBUS system bus, comprehensively enhancing the driving and riding experience.
Was this review help?
16
4
Share
VonEliza
09/14/25 2:46am
Last year my RX5's maintenance light came on, which initially made me panic. Later I learned the method: first park the car stably and turn off the engine, insert the key and turn it to the ON position - that's when the dashboard lights up but the engine isn't started. Then locate the TRIP button on the left side of the steering wheel, press and hold it for about 10 to 15 seconds, and the maintenance light will flash a few times before turning off - it's super simple. Doing it yourself saves time and money, and also reminds me to check the oil and filters. Don't slack off on regular maintenance as it helps keep the engine more durable. If the process seems stuck, try holding the button a few seconds longer - it usually works. Safety first: make sure the car is on level ground and won't roll before performing this operation.
Was this review help?
20
0
Share
Expand All
More Forum Discussions

Which Engine Oil to Choose for Audi Q3?

Audi Q3 is recommended to use the official Audi original engine oil. The following is the relevant information: For car owners, the official original engine oil can generally be used when servicing at a 4S shop, and it should be replaced according to the maintenance manual or the recommendations of the 4S shop, while also considering the model. Audi Q3 introduction: 1. The body dimensions of the Audi Q3 are 4385mm in length, 1831mm in width, and 1608mm in height, with a wheelbase of 2603mm. 2. The Audi Q3 offers two engine options: a 1.4-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.4-liter turbocharged engine has a maximum horsepower of 150 HP; the low-power version of the 2.0-liter turbocharged engine has a maximum horsepower of 186 HP, while the high-power version has a maximum horsepower of 220 HP.
16
4
Share

How to reset the trip?

trip reset methods are as follows: 1. Mechanical meter: (1) There is a protruding small round button on the dashboard. Press and hold this button for a while to reset the meter. (2) Remove the dashboard, take off the upper cover of the meter, and remove the pointers for speed, fuel gauge, water temperature, and RPM. Then use a flat-head screwdriver to adjust the mileage gear, which can roll back or reset. 2. Electronic meter: The mileage data is stored in an encrypted form on the chip of the dashboard. To reset, you need to clear the data storage location on the chip and then directly input the desired mileage data into the corresponding location on the chip. After reinstalling the chip into the dashboard, it will display the desired mileage. The simplest way to reset is to directly replace the dashboard with a new one.
8
1
Share

Is a Qualification Certificate Required to Drive a Truck?

Trucks with a gross mass exceeding 4.5 tons require a qualification certificate, while those with a gross mass of 4.5 tons or less do not. Relevant details are as follows: According to the "Notice of the General Office of the Ministry of Transport on the Cancellation of Road Transport Certificates and Driver Qualification Certificates for Ordinary Cargo Vehicles with a Total Mass of 4.5 Tons or Less," starting from January 1, 2019, the management of qualification certificates for ordinary cargo transportation and vehicle operation certificates for vehicles of 4.5 tons or less will be temporarily implemented as follows: 1. Starting from January 1, 2019, transportation management departments across the country will no longer issue road transport certificates for ordinary cargo vehicles with a total mass of 4.5 tons or less. 2. Starting from January 1, 2019, for ordinary cargo vehicles with a total mass of 4.5 tons or less engaged in ordinary cargo transportation activities, transportation management departments across the country shall not impose administrative penalties on such vehicles or drivers on the grounds of "unlicensed operation" or "driving road passenger and cargo transport vehicles without obtaining the corresponding qualification certificate."
16
4
Share

Is the GAC Trumpchi GS4 cost-effective?

GAC Trumpchi GS4 offers excellent value for money. Below are its pros and cons: Pros: 1. In terms of appearance, the overall design is robust yet sporty. The five-spoke alloy wheels feature a new style, giving a fashionable look. 2. Regarding configuration, the Trumpchi GS4 is generous with safety features. The Comfort trim, except for the manual transmission variant, comes equipped with ESP stability control, hill-start assist, hill descent control, and rear parking sensors as standard across all models. 3. Fuel consumption is satisfactory, with the 1.5T version averaging around 7/8 liters per 100km for manual/automatic transmissions. Cons: 1. Although the car has independent suspension front and rear, the tuning is somewhat stiff, compromising comfort on rough roads. 2. The engine lacks punch at low RPMs, and there's noticeable lag when accelerating hard by stomping the throttle. 3. There are too few interior color options, only available in dark tones.
19
5
Share

How to reset the tire pressure warning light on Changan CS55?

Method to reset the tire pressure warning light on Changan CS55: There is a circular operation button in the middle of the right side of the Changan CS55 cockpit. First, turn on the ignition switch without starting the car. Then press the operation button, and options will appear on the central display screen. Select the "Vehicle Information" option and click OK, then the reset items will appear. Find the tire pressure reset and follow the on-screen system prompts to reset the tire pressure settings. Below is some related information: 1. When the tire pressure warning light comes on, it indicates that the pressure in one or more tires is too low or too high. When the vehicle's tire pressure monitoring system detects an abnormality, a warning message will appear on the display screen, and the tire pressure warning light will illuminate. 2. If the tire pressure warning light comes on while driving on the highway, do not panic. Immediately reduce your speed and avoid sharp steering and sudden braking, then check the tires. If you find that the tire pressure is significantly low, you can drive to the nearest service area for inspection and repair. 3. Generally, the standard tire pressure for small cars is between 2.4-2.5 bar. Both overinflation and underinflation can affect tire performance. Overinflation can affect braking power, while underinflation can cause rapid wear on the tire sidewalls. Continued driving with low pressure can lead to sidewall rupture and even tire blowouts. Always refer to the car's maintenance manual for the standard tire pressure.
10
1
Share

What is the function of the activated charcoal canister in a car?

The function of the activated charcoal canister in a car is to absorb gasoline vapors that escape from the fuel tank and carburetor when the engine is turned off. When the engine starts, the absorbed gasoline is then blown out and burned. Additional relevant information is as follows: 1. The gasoline vehicle fuel vapor adsorption and desorption device, commonly known as the 'carbon canister,' is an apparatus designed to reduce the emission of gasoline vapors from the car's fuel tank and carburetor. 2. Since gasoline is a volatile liquid, the fuel tank is often filled with gasoline vapors at normal temperatures. The fuel evaporation emission control system's role is to direct these vapors into the combustion process and prevent them from evaporating into the atmosphere. 3. The automobile engine's activated carbon canister has three outlets: the top two outlets connect to the fuel tank and the activated carbon canister solenoid valve, respectively, while the bottom outlet vents to the atmosphere.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.