How to Reset the Maintenance Reminder After Servicing a Chevrolet?

1 Answers
VanBradley
07/30/25 4:40am
Methods to reset the maintenance reminder after servicing a Chevrolet: 1. Turn on the ignition; 2. Press the "Menu" button on the audio control panel until "OilLifeReset" appears on the audio display; 3. Hold down the "Enter" button on the audio control panel for at least 1 second, at which point the audio display will show "Acknowledged" for approximately 3 seconds; 4. After completing these steps, the maintenance reminder will be reset. Chevrolet offers a variety of sedans and SUVs, among which the Malibu is a mid-size sedan. The Malibu measures 4855 mm in length, 1854 mm in width, and 1476 mm in height, with a wheelbase of 2737 mm. The Malibu is equipped with four engine options: a 1.5-liter turbocharged engine, a 1.6-liter turbocharged engine, a 2.0-liter naturally aspirated engine, and a 2.4-liter naturally aspirated engine.
Was this review help?
8
3
Share
More Forum Discussions

Does a car registered in June 2013 need an inspection in 2021?

A car registered in June 2013 requires an annual inspection in 2021. Below are the specific regulations for vehicle inspections: 1. Passenger transport vehicles: Inspected once a year for the first 5 years; every 6 months after exceeding 5 years. 2. Trucks and large/medium-sized non-passenger transport vehicles: Inspected once a year for the first 10 years; every 6 months after exceeding 10 years. 3. Small and mini non-passenger transport vehicles: Inspected every 2 years for the first 6 years; once a year after exceeding 6 years; every 6 months after exceeding 15 years. 4. Motorcycles: Inspected every 2 years for the first 4 years; once a year after exceeding 4 years. 5. Other motor vehicles: Inspected once a year.
11
0
Share

Where can the BMW S1000RR be purchased?

BMW S1000RR can be purchased at Beijing Lude and Shanghai Dongbao. Below is detailed information about the BMW S1000RR: 1. Model Information: The BMW S1000RR is a superbike, with the first model released in 2009. It features a four-stroke inline four-cylinder water-cooled engine, with a total displacement of 999cc, and a top speed exceeding 300 km/h. The BMW S1000RR superbike places great emphasis on weight design, utilizing an aluminum alloy frame, and the total weight is only 206.5 kg when fully fueled. 2. Performance Characteristics: Overall, the BMW S1000RR performs excellently, with smooth operation in all aspects.
9
3
Share

Does pulling the electronic handbrake directly in D gear damage the car?

Pulling the electronic handbrake directly in D gear will not damage the vehicle. The electronic handbrake is a technology that achieves parking braking through electronic control, and its working principle is similar to that of a mechanical handbrake. Both rely on the friction generated between the brake disc and brake pads to control parking braking, except that the control method has changed from the traditional mechanical handbrake lever to an electronic button. More information about the electronic handbrake is as follows: 1. Introduction: The electronic handbrake, also known as the Electronic Parking Brake (EPB) system, integrates the temporary braking function during driving with the long-term braking function after parking, and achieves parking braking through electronic control. 2. Function: The electronic handbrake extends from the basic parking function to the automatic parking function (AUTOHOLD). The application of AUTOHOLD technology allows drivers to avoid prolonged braking when the vehicle is stationary. With the automatic electronic parking brake engaged, unnecessary vehicle sliding can be prevented. Currently, there are generally two types of electronic parking brake technologies applied in vehicles: one is the cable-type electronic parking brake system, and the other is the caliper-integrated electronic parking brake system.
1
3
Share

How to Adjust the LNG Tank Economizer Valve for Maximum Fuel Efficiency?

LNG vehicles achieve maximum fuel efficiency when the economizer valve adjustment nut is rotated counterclockwise downward. Below are some related tips for saving fuel in LNG vehicles: Precautions for adjusting the economizer pressure valve: Pay attention to the direction and magnitude of adjustment. Rotating the adjustment nut clockwise upward increases the pressure in the gas tank and simultaneously raises the gas supply pressure to the engine, which enhances the gas supply volume, thereby improving engine power but also increasing fuel consumption. Conversely, reducing the tank pressure decreases the engine's gas supply, lowering engine power output. Daily fuel-saving precautions: Maintain a safe distance to reduce braking frequency. When braking, the gear shifts down. As speed increases, the vehicle will need to start from a lower gear, causing the engine to consume more fuel. Maintain a steady speed. Most highways in China have a speed limit of 120 km/h. Higher speeds lead to greater natural gas consumption. The vehicle's resistance is directly proportional to the square of its speed. Therefore, the faster the car goes, the greater the wind resistance and driving resistance. Speeds between 100 and 120 km/h are more fuel-efficient. Drive steadily and develop good driving habits. Frequent lane changes increase travel distance and consume more natural gas. To overtake when changing lanes, you must press the accelerator harder, naturally increasing fuel consumption. Additionally, vehicle misalignment is one of the main causes of fuel consumption. Unbalanced wheels force the engine to provide more power, consuming more fuel. Therefore, standardizing driving rules and cultivating good driving habits are effective measures for fuel conservation.
8
1
Share

What are the causes of EPB electronic parking brake system failure?

EPB electronic parking brake system failure requires inspection of the vehicle wiring, parking motor, and rear brake pads. The electronic parking brake system (EPB: Electrical-Park-Brake), commonly referred to as the electronic handbrake, integrates the temporary braking function during driving with the long-term parking braking function, and achieves parking braking through electronic control technology. More information about the electronic parking brake system is as follows: 1. Introduction: The electronic handbrake, also known as the electronic parking brake system (Electrical-Park-Brake, EPB), refers to the technology that combines the temporary braking function during driving with the long-term parking braking function and realizes parking braking through electronic control. 2. Function: The electronic handbrake extends from the basic parking function to the automatic parking function (AUTOHOLD). The application of AUTOHOLD automatic parking technology allows drivers to avoid prolonged braking when the vehicle is stopped. With the automatic electronic parking brake activated, unnecessary vehicle sliding can be prevented. Currently, there are generally two types of electronic parking brake technologies applied in vehicles: one is the cable-type electronic parking brake system, and the other is the caliper-integrated electronic parking brake system.
20
0
Share

Does Tree Sap Affect Car Paint?

Excessive accumulation of pine tree sap, if not cleaned for a long time and allowed to penetrate the car paint, may damage the surface paint of the car. Purchase a bottle of tar remover from an automotive supply store to remove the tree sap adhering to the car body. The specific method is to apply a few drops of tar remover directly onto the sap spots; once the sap dissolves into a yellowish liquid, wipe it off with a damp cloth. Additional tips for car paint maintenance: 1. Clean dust from the car body promptly before, during, and after use to minimize the attraction of dust due to static electricity. 2. Rinse the car promptly after rain. 3. Wash the car when the engine is cool, avoiding washing under direct sunlight or high temperatures to prevent the cleaning agent from drying and leaving marks.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.