How to reset the maintenance mileage for Changan CS15?

[LaFrancisco]

Turn the ignition switch to the OFF position, press the DISP button for 3 seconds, then release the button. Turn the ignition switch to the ON position again, and press and hold the DISP button for another 3 seconds. This will complete the maintenance mileage reset. Note that you do not need to start the engine. Insert the key and turn it forward once to reach the OFF position, and turn it forward once more to reach the ON position. Below is some relevant information: 1. The purpose of the maintenance light is to record the mileage of some important components, similar to a timer in a sprint race, serving as a reminder for the car owner and maintenance personnel. If the owner replaces the relevant components but does not reset the light, it will not affect the vehicle's performance, but it may cause trouble for the next replacement of car parts, as the exact usage time of the new components cannot be accurately known. 2. The first maintenance should not be delayed. It is best not to delay the first maintenance of the car because new cars go through a break-in period. During this period, the internal parts of the engine, through contact and friction, leave some fine metal shavings in the lubricant. Therefore, at the time of the first maintenance, the break-in oil and filter must be replaced to avoid causing greater damage to the car.

[SanBeau]

I remember resetting the maintenance mileage for the Changan CS15 was quite simple. Last time after my car had just been serviced, I did it myself. First, sit in the car and close the door, then turn the key to the ACC position—that's when the engine isn't running but the dashboard lights up. Next, locate the odometer reset button near the steering wheel, press and hold it for a few seconds until the setup menu appears, and you see the 'Maintenance' option highlighted. Use the directional buttons to select it and confirm the reset. The whole process takes less than a minute and requires no tools, making it easy even for beginners. After resetting the maintenance mileage, the wrench icon disappears, and you won't be bothered by annoying reminders until your next visit to the 4S shop. Regular maintenance is really crucial—it helps check engine fluids, tire wear, and more, extending your car's lifespan and improving fuel efficiency. Ignoring it could increase the risk of accidents. So, I recommend keeping a copy of the owner's manual handy, as it provides detailed steps for added assurance.

[LeonardoFitz]

I've helped friends fix several cars, and resetting the maintenance mileage for models like the Changan CS15 is no big deal. Turn the key to the ON position without starting the engine, locate the small button on the dashboard, and press it to enter the menu interface. Navigate to the vehicle settings section, select the maintenance information, and press the OK button to confirm the reset. Sometimes, if the key is not inserted long enough, you'll need to try again—don't worry, a few attempts should do the trick. I always remind owners not to overlook this small task because it alerts you when it's time to change the oil and filters; otherwise, vehicle performance may decline, increasing repair costs. If the button is unresponsive, it might be due to poor wiring contact and needs checking. Paying attention to these details during daily driving can prevent the embarrassment of breaking down on the road—developing good habits is all about safety first.

[DerekLee]

When I first learned to drive, I was quite curious about the maintenance mileage reset for the Changan CS15. Actually, it's just turning the key to light up the dashboard without starting the engine, then holding down the reset button on the dashboard for a few seconds until the menu pops up. Select the maintenance item and press confirm to reset it to zero—super simple! I learned it from an online tutorial and got it right the first time without needing to memorize the steps. Remember, after resetting, the light will come on again next time maintenance is due to remind you that maintenance is important, blah blah blah.

[McLouis]

Every time after maintenance, I quickly reset the mileage indicator on my Changan CS15 because if I don't turn it off, I tend to forget the next service date, which could lead to engine carbon buildup issues affecting brake performance and such. The method is: get in the car without stepping on the brake, turn the key to the ignition position, wait for the dashboard to light up, then press and hold the reset button to enter the menu, find the maintenance option, and click reset to complete the process. The key is not to miss this step, otherwise, the car light keeps on, causing distracted driving which is unsafe. Anyway, once you develop the habit, it saves money and gives peace of mind, reducing potential troubles.