How to reset the maintenance light reminder on the Ford Kuga?
4 Answers
The method to reset the maintenance light reminder on the Ford Kuga is: 1. Close all doors and windows; 2. Turn the ignition switch to position 2; 3. Simultaneously press and hold the accelerator and brake pedals for about 3 seconds, the dashboard will display an interface that remains for 25 seconds; 4. After 25 seconds, the interface will show "complete", indicating the maintenance light has been reset. Taking the 2019 Ford Kuga as an example, its body dimensions are: length 4524mm, width 1838mm, height 1685mm. It is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 182ps, maximum power of 134kw, and maximum power speed of 6000rpm.
I've been driving a Ford Escape for several years, and every time the maintenance light comes on, I clear it myself. The method is actually quite simple: first, turn the key to the OFF position without starting the engine. Then locate the TRIP button near the steering wheel and press it with your thumb. Next, turn the key to the ON position (where the dashboard lights up but the engine doesn't start), hold it for about 8 to 10 seconds, and wait until the maintenance light goes off before releasing. After completing this, I always make it a habit to check the oil dipstick, coolant level, and brake fluid to avoid any issues next time. As a long-time owner, I believe regular maintenance is crucial—only with good car condition can you drive with peace of mind. If you can't handle it yourself, it's best to visit a professional shop to check for hidden faults, rather than just clearing the light. Paying attention to these details regularly can save you from spending big on major repairs later.
As an automotive technology enthusiast, I consider resetting the Escape's maintenance light a fundamental skill. The general procedure is: Turn off the ignition to ensure the vehicle is stationary, then firmly press and hold the trip reset button on the instrument panel. Next, rotate the key to the ON position (all dashboard lights will illuminate but the engine won't start), continue holding the reset button for 5-7 seconds until the maintenance light automatically extinguishes. Don't release the button midway as it may cause failure. Actually, the light reminds you to change oil or inspect components, so I recommend performing maintenance checks before proceeding. After several attempts, I've mastered this process and can even DIY clean the air filter to save on labor costs. In summary, DIY is simple and convenient, but consult your owner's manual for model-specific variations if unsure.
I helped a friend reset the maintenance light on his Escape once, and it was quite simple. Turn off the ignition key, hold down the button near the steering wheel without releasing, then turn the key to the ACC position until the dashboard lights up. Don't press the brake, count to about six seconds until the light goes off. Don't rush during the operation, one try is enough. The maintenance light is mainly to remind you to check things like engine oil. After doing these, you don't need to spend money at the shop to have someone do it. Learning to do it yourself is quite convenient.
