How to reset the maintenance light on Zotye T700?

What Causes a Heavy Clutch in the Sonata?

Sonata clutch heavy reasons are as follows: 1. The return spring tension is too high; replacing it with a spring of lower tension can resolve the issue. 2. The clutch assist cylinder is damaged; check if the assist cylinder is functioning properly, as low-quality assist cylinders are more prone to such problems. 3. Low compressed air pressure; when this fault occurs, priority should be given to checking the compressed air pressure leading to the clutch booster. 4. Insufficient lubrication leading to excessive friction, which can cause the clutch pedal to feel heavy. 5. The release bearing is too tight; if the clearance between the release bearing and the guide sleeve is too small, it will result in excessive friction, naturally making the pedal heavy.

2

Share

How to Check the Tire Pressure Monitoring System?

Tire pressure monitoring system can be viewed on the central LCD screen of the instrument panel or the multimedia screen. The tire pressure monitoring system automatically monitors the tire pressure in real-time during driving and alerts the driver in case of tire leakage or low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and then the tire pressure data for each tire is displayed. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure of a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds between tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped. Compared to using only direct systems, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data of the actual pressure in all four tires as direct systems do.

3

Share

Where is the OBU installed?

Best installation locations are as follows: 1. Height should be no less than 1.2 meters and no more than 2.5 meters. 2. Installation angle N should be between 30-90 degrees (the angle between the electronic tag surface and the horizontal plane). 3. For small vehicles such as cars and minivans, the OBU device should be installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position should be in the middle lower part. 4. If the vehicle has anti-explosion film or is fitted with anti-explosion film later, since the film contains metal ions that may affect microwave communication signal transmission, it should be installed in the "microwave window" area or a rectangular area of 8cmX10cm should be cut out from the anti-explosion film.

17

4

Share

What engine is equipped in the Changan CS95?

The Changan CS95 is equipped with the Blue Whale engine, which is independently developed by Changan Automobile and belongs to a domestically produced engine. The engine model of the Changan CS95 is JL486ZQ4, with a maximum power of 171kW, a maximum torque of 360 Nm, and a maximum horsepower of 233. For daily maintenance of the Changan CS95 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and maintain an appropriate oil level. When engine oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

17

5

Share

Is It Normal for a Car to Leak Water When the Air Conditioning Is On?

Whether it is normal for a car's air conditioning to leak water depends on the situation, as follows: 1. Normal: It is normal for water to leak from the rear exhaust pipe or other external parts of the car when the air conditioning is on. This is condensation from the air conditioning and does not harm the car or the air conditioning system. 2. Abnormal: If water leaks inside the car, such as under the passenger seat, it is abnormal, and the car should be taken to a repair shop for maintenance. Here are some car air conditioning maintenance tips: 1. Do not frequently adjust the direction of the air conditioning vents. 2. In winter, the air conditioning should be turned on periodically. 3. In summer, ventilate the car to cool it down before driving, then use the internal circulation mode. Avoid using the internal circulation mode for extended periods.

15

1

Share

What is the abbreviation for Inner Mongolia license plates?

Inner Mongolia's license plate abbreviation is Meng. The license plate codes for various regions in Inner Mongolia are: Meng A for Hohhot, Meng B for Baotou, Meng C for Wuhai, Meng D for Chifeng, Meng E for Hulunbuir League, Meng F for Xing'an League, Meng G for Xilingol League, Meng H for Ulanqab League, Meng J for Ih Ju League, Meng K for Bayannur League, Meng L for Alxa League, Meng M for Alxa League. Here is some relevant information about Inner Mongolia: 1. Area: Inner Mongolia covers a total area of 1.183 million square kilometers. 2. Location: It is situated between 37°24′N to 53°23′N latitude and 97°12′E to 126°04′E longitude.

3

Share

How to reset the maintenance light on Zotye T700?

What Causes a Heavy Clutch in the Sonata?

How to Check the Tire Pressure Monitoring System?

Where is the OBU installed?

What engine is equipped in the Changan CS95?

Is It Normal for a Car to Leak Water When the Air Conditioning Is On?

What is the abbreviation for Inner Mongolia license plates?

Which company owns the Lynk & Co brand?

How to remove ETC from the vehicle?

Does the Ferrari 488 Have Four-Wheel Drive?

Why is the Volkswagen water pump leaking?