How to reset the maintenance light on Zotye T700?
2 Answers
Zotye T700 maintenance light reset steps are as follows: 1. Turn off the ignition switch, then press and hold both arrow buttons simultaneously, and turn on the ignition switch; 2. After the ignition switch is on for about 3 seconds, release the two arrow buttons. At this time, the maintenance menu will appear on the display, showing a page asking whether to reset; 3. Press and hold the SET (reset) button for about 3 seconds, then press the MODE button to turn off the ignition switch, and the maintenance will be reset. When the maintenance light comes on, it means that the car needs maintenance, and the maintenance light should be reset after the maintenance is completed.
I've also driven the Zotye T700, and resetting the maintenance light is quite simple. You need to turn the key to the ON position but don't start the engine. Then look at the steering wheel, press the multifunction button on the right, usually the TRIP button, and select the maintenance option in the instrument menu. Find a reset option and hold it for a few seconds until the light goes off. I've done it a few times myself, mainly following the vehicle manual's instructions. The maintenance light comes on to remind you to change the oil and perform routine checks; not addressing it promptly can affect the engine's lifespan. After driving it for over a year, I think regular maintenance saves both hassle and money. If you really can't figure it out or the light keeps coming back on, it's best not to force it—take a trip to the 4S shop and let the technician diagnose it with a computer. Safety first. After all, the car is your old buddy; you've got to take good care of it.
