How to Reset the Maintenance Light on Zotye SR7?

1 Answers
LeCaden
07/24/25 8:04pm
Zotye SR7 maintenance light reset steps are as follows: 1. Turn off the ignition switch. 2. Press and hold the trip meter "reset" button located at the lower left of the instrument panel. 3. Turn on the ignition switch, at this time the odometer display will start counting down, keep pressing the "reset" button. 4. When the maintenance reminder stops flashing, release the "reset" button. 5. Turn on the ignition switch or start the car again to check if the maintenance light has been reset. The small wrench icon on the instrument panel is the car's maintenance reminder light. When the maintenance light is on, it indicates that the car needs maintenance. Regular maintenance includes body maintenance, interior maintenance, and body refurbishment. 1. Body maintenance mainly involves removing various oxides inside and outside the car body to prevent corrosion. 2. Interior maintenance mainly involves repairing the fuel, lubrication, and other operating systems to ensure the car's operation. 3. Body refurbishment mainly involves repairing scratches, engines, bumpers, leather, and other materials.
Was this review help?
8
2
Share
More Forum Discussions

How to Wear a Motorcycle Helmet?

When wearing a motorcycle helmet, the helmet should remain parallel to the head, with the edge of the helmet positioned approximately 1 centimeter above the eyebrows. There should be a gap of about two fingers' width under the chin strap. Once the helmet is properly worn, it should not wobble from side to side. Below is some information about motorcycle helmets: 1. Introduction: A motorcycle helmet is a protective device designed for the heads of motorcycle riders and passengers. Its primary purpose is to protect the rider's head during an impact, preventing or reducing injuries and potentially saving the rider's life. 2. Precautions: Generally, helmets can fit any head shape, but attention should be paid to the helmet's ventilation and size.
11
2
Share

How Many Remote Keys Can a Car Have?

When purchasing a car, the 4S dealership provides two keys: one can be carried around, and the other can be kept at home as a spare in case the key is lost or locked inside the car. Below is relevant information: 1. Types: There are three common types of car keys: traditional mechanical keys, remote keys, and keyless start. 2. Chip System: Modern car keys are generally equipped with a built-in chip system. The car's computer will recognize the key chip and read the information stored within. 3. Remote Key: This type of key allows you to unlock and lock the doors remotely without inserting the key into the lock. Its biggest advantage is that, regardless of day or night, you can conveniently unlock and lock the car from a distance without needing to locate the keyhole.
9
1
Share

Can I Turn on the Air Conditioning While Charging a New Energy Vehicle?

It is best not to turn on the air conditioning, as this will increase power consumption and slow down the charging speed. In electric vehicles, the compressor for air conditioning cooling is driven by the motor, so using the air conditioning consumes electricity. The cooling principle of car air conditioning is as follows: 1. Compressor: In gasoline cars, when cooling is needed, the AC button must be pressed, which engages the compressor clutch. At this time, the engine drives the compressor to operate, allowing the compressor to continuously compress the refrigerant and deliver it to the evaporator. 2. Evaporator: The refrigerant expands and absorbs heat inside the evaporator, cooling the evaporator. The cooled evaporator then cools the air blown by the blower, allowing the air conditioning vents to blow cold air.
20
2
Share

What Causes the Abnormal Noise After a Car Drives Through Water?

Possible reasons for abnormal noise after a car drives through water are as follows: 1. Brake pads getting wet: If the car's wading depth is not significant and water splashes onto the brake pads, it is normal to hear a squealing sound when braking. This situation will resolve itself as the water on the brake pads dries up with normal driving. 2. Foreign objects on brake pads: If the car wades through deeper water, foreign objects such as plastic bags, paper scraps, or mud mixed in the water may get stuck on the brake pads, causing noise when braking. In this case, the brake pads need to be cleaned. 3. Water ingestion in the exhaust pipe: If the car wades through deep water and water enters the engine through the exhaust pipe, it can prevent the normal combustion of fuel and air mixture in the engine, resulting in noise.
15
1
Share

Where is the USB port on the new Volkswagen Santana?

The USB port on the new Volkswagen Santana is located under the center console panel. The in-car USB can be used to read USB drive information for the car entertainment system and charge mobile phones, among other functions. However, due to power limitations, the charging speed is not very high. More extended information is as follows: 1. Exterior: The new Santana already features the current standard design style of Volkswagen's three-box sedan, whether it's the front face or the waistline curves. Its front face design can even be said to have a 'Shanghai Volkswagen style.' Real wood interiors are only available in high-end models, and the steering wheel follows the popular style common in the Volkswagen family. 2. A05+ Platform: It adopts Volkswagen's latest A05+ platform. A05 refers to the fifth-generation platform of Volkswagen's A0-class models, and the '+' symbol represents an enhanced version of the platform, with the enhancement mainly focusing on increased dimensions. 3. Powertrain: It uses Volkswagen's latest EA211 series, including a 1.6L EA211 engine, and another 1.4L engine also based on the EA211 will be introduced. 3. Configuration: The Santana successor will offer up to 9 optional packages. These include side airbags, curtain airbags, dual-zone air conditioning, a multifunction steering wheel, seat heating, and ESP body stability system, among others.
1
3
Share

Can motorcycles undergo annual inspection in a different location?

Motorcycle driver's licenses can undergo annual inspection in a different location. Below is relevant information about the annual inspection: 1. Conditions: If the vehicle condition does not match the records on the driving license or vehicle file, or if the license plate or driving license is damaged, incomplete, illegible, or if the license plate is self-made. 2. Notes: The vehicle's exterior must not be modified. The color of the glass sunshade or anti-glare film must not be too dark (items inside the vehicle should be clearly visible from one meter away; mainly applies to vans and trucks, but not to small cars with 5 seats or fewer); vans and trucks must have enlarged rear license plate numbers, the number of spring leaf plates cannot be increased or decreased, the number of seats in vans cannot be increased or decreased, and a fire extinguisher must be present.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.