How to reset the maintenance light on Zotye Damai X7?

1 Answers
BrooklynLee
07/30/25 6:16am
The method to reset the maintenance light on Zotye Damai X7 is: After turning off the engine, press the button on the left side of the dashboard while powering on the car, and the maintenance light will reset after a few seconds. Taking the 2018 Zotye Damai X7 Glory Edition as an example, it belongs to a mid-size SUV with body dimensions of: length 4736mm, width 1942mm, height 1672mm, wheelbase of 2850mm, and a fuel tank capacity of 60 liters. The 2018 Zotye Damai X7 Glory Edition is equipped with a 1.8T turbocharged engine, with a maximum power of 130kW and a maximum power speed of 5800rpm, paired with a 6-speed dual-clutch transmission.
Was this review help?
4
0
Share
More Forum Discussions

Why is the exhaust pipe noise loud when stepping on the accelerator?

Engine noise is directly related to the RPM (revolutions per minute). The higher the RPM, the louder the sound. When you step on the accelerator, the engine RPM increases, and consequently, the noise also becomes louder. Possible causes for this phenomenon include issues with the air filter, spark plugs, ignition wires, gasoline, fuel filter, carburetor, or fuel pump. You can systematically check these components to identify any problems. Here is some relevant information about the car's cabin air filter: 1. Introduction: The car cabin air filter is a specialized filter designed for air purification inside the vehicle compartment. It uses activated carbon composite filter material, which combines highly efficient adsorption material (activated carbon) with long-fiber non-woven fabric, resulting in a compact structure. 2. Function: It effectively filters smoke odors, pollen, dust, harmful gases, and various other odors. The filter also efficiently captures and adsorbs particulate impurities, achieving oil filtration and air purification performance.
17
0
Share

What causes the jerking sensation when shifting from N to D gear?

Damaged solenoid valves are a significant cause of jerking sensations. Below is relevant information about gear positions: 1. Concept: Gear positions are adjustment devices that regulate a car's speed and traction (torque). The lower the gear, the slower the speed, but the greater the car's traction (torque). The higher the gear, the faster the speed, but the smaller the car's traction (torque). Gear positions are generally divided into two main categories: forward gears and reverse gear. Engaging a forward gear makes the car move forward, while engaging reverse gear makes the car move backward. 2. Common car gear positions: Typically, common cars have five forward gears and only one reverse gear. The first forward gear is the starting gear, where the speed is the slowest (0-10 km/h), but the torque is the greatest.
17
0
Share

How Wide is an Average Family Car?

The average sedan is approximately 4.8 meters long and 1.8 meters wide. The dimensions vary depending on the model. Length: Microcars range from 3 to 4 meters, compact cars around 4 meters, midsize cars around 5 meters, and luxury cars over 5 meters. Heavier vehicles generally offer better stability at high speeds. Factors influencing high-speed stability include: 1. Vehicle Tires: Tires are the only components in contact with the road. Wider and flatter tires generally improve stability at high speeds. 2. Vehicle Shape: Aerodynamics play a crucial role in high-speed stability; vehicles with better aerodynamic designs are more stable. 3. Drivetrain: Most vehicles are front-wheel drive, rear-wheel drive, or all-wheel drive. All-wheel drive vehicles tend to be more stable than two-wheel drive vehicles. 4. Suspension System: Vehicles with independent suspension systems, such as MacPherson struts or multi-link suspensions, are generally more stable than those with non-independent suspension systems.
16
3
Share

Is 15 Liters per 100 Kilometers Normal?

Fuel consumption of 15L/100km means that 15 liters of fuel are consumed every 100 kilometers, which calculates to 0.15 liters per kilometer. Strictly speaking, 15L/100km is relatively high fuel consumption, as most vehicles on the market typically have a fuel consumption level of around 7 to 8 liters. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in constant-speed driving fuel consumption tests specified by national standards for certain types of vehicles. 2. Testing Methods: The test can be conducted on the road or on a chassis dynamometer, and the fuel consumption per 100 kilometers is then determined using the 'flowmeter method' or 'carbon balance method'.
12
5
Share

What does engine oil SPC3 mean?

SP is the new standard of the American Petroleum Institute, which is the grade standard for engine oil; C3 engine oil is the testing and certification standard for automotive lubricants by ACEA, the European Association of Automobile Manufacturers. The relevant information about engine oil is as follows: 1. Introduction: Engine oil, also known as engine lubricant, English name: Engine-oil. With a density of approximately 0.91×10³ (kg/m³), it can lubricate and reduce wear, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption for the engine. 2. Composition: Engine oil consists of two parts: base oil and additives. Base oil is the main component of lubricating oil, determining its basic properties, while additives can compensate for and improve the shortcomings of base oil performance, endowing it with new properties, making them an important part of lubricating oil.
16
2
Share

How to Reset the Maintenance Reminder on the Car Dashboard?

Method to reset the maintenance reminder on the car dashboard: Turn on the power, press and hold the mileage reset button on the dashboard until the "flashing reminder" disappears, then start the engine and repeat the operation once more. Here are the related steps for the dashboard: 1. Insert the key to the first position; then press and hold the wrench symbol button located at the bottom right of the speedometer without releasing. 2. With the other hand, turn the key to the second position, where all the indicator lights on the dashboard illuminate. 3. At this point, place your hands on the two buttons at the bottom left of the tachometer and the two buttons at the bottom right of the speedometer, then press all four buttons simultaneously. You will notice that the "Service Now" message on the information screen disappears.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.