How to reset the maintenance light on Zhonghua V3?
3 Answers
The method to reset the maintenance light on Zhonghua V3 is: 1. Turn off the ignition button of the car; 2. Press and hold the maintenance reset button on the car dashboard for a long time; 3. While holding the maintenance reset button, press the car's start button to start the vehicle; 4. When the display shows 0000.0, release the maintenance reset button. The Zhonghua V3 is a 5-door, 5-seat compact SUV with body dimensions of 4240mm in length, 1803mm in width, and 1600mm in height, with a wheelbase of 2570mm. The Zhonghua V3 is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 87kW and a maximum torque of 150Nm, paired with a 5-speed manual transmission.
I really enjoy tinkering with cars myself, and recently helped a friend deal with the maintenance light issue on his Zhonghua V3. The method is quite straightforward: turn off the engine without starting it, then rotate the key to the ACC position (where the dashboard lights up but the engine doesn't run). At this point, locate the small button or menu key on the dashboard, usually labeled RESET or something similar, and hold it for at least 5 to 8 seconds until the light goes off. If there's no response, check the manual or try turning the key on and off a few times. The maintenance light indicates that the car needs regular servicing, and resetting it allows the system to record the new service time, preventing you from forgetting the next maintenance. DIY can save time and money, but if you're unfamiliar with electrical systems or notice anything unusual, it's best to consult a professional mechanic—safety first, don't push your luck.
As an ordinary car owner, I'd like to share a practical tip with everyone. Resetting the maintenance light on a Zhonghua V3 isn't difficult: After turning off the engine, rotate the key to the ignition-on position (where the dashboard lights up but the engine doesn't start). Then press and hold the reset button on the instrument panel for about 10 seconds until the light goes off. Remember to do this only after completing maintenance, otherwise it might trigger false alarms. I've successfully used this method once before. If the light doesn't turn off, it could be due to loose wiring or a bulb issue - simple checks can help you fix it yourself. I recommend regular vehicle maintenance as this function reminds you to change oil filters; neglecting it could lead to major repairs later.
