How to Reset the Maintenance Light on Volkswagen Magotan?

1 Answers
HaileyLee
07/29/25 4:39pm
Volkswagen Magotan maintenance reset method: 1. Turn off the ignition switch and shut down the engine; 2. Press and hold the 0.0 button on the instrument panel; 3. Turn on the ignition switch while keeping the 0.0 button pressed with your left hand; 4. When the instrument panel display shows a message, release the 0.0 button; 5. Press the 0.0 button once again to confirm, a single press is sufficient. The Volkswagen Magotan originates from the Future B6, which is closely related to the Passat B6, and it is the first B-segment sedan produced and sold by FAW-Volkswagen since its establishment. In terms of body dimensions, it measures 4866mm in length, 1832mm in width, 1464mm in height, with a wheelbase of 2812mm.
Was this review help?
8
1
Share
More Forum Discussions

Which country manufactures Mazda cars?

Mazda cars are manufactured in Japan. It is a Japanese multinational automobile manufacturer listed on the Tokyo Stock Exchange. Mazda is one of Japan's renowned automotive brands and the only car company in the world that develops and produces rotary engines. Mazda's logo features a seagull spreading its wings within an ellipse, forming the letter 'M', which stands for the first capital letter of MAZDA. Taking the Mazda3 as an example, the car's dimensions are 4515mm in length, 1745mm in width, and 1465mm in height, with a wheelbase of 2640mm. The vehicle is equipped with advanced features such as a lighting control system, active adaptive headlights, hill start assist, emergency brake signaling, and lane departure warning system.
16
5
Share

How many exam attempts are allowed for Subject 2 and Subject 3 combined?

For Subject 2 and Subject 3, each appointment allows one exam attempt. If the exam is not passed, an immediate retake is permitted. If the candidate does not take the retake or fails the retake, the exam session ends, and the applicant must reschedule the exam after ten days. Within the validity period of the driving skill test permit, the number of exam appointments for Subject 2 and Subject 3 (road driving skills) must not exceed five. If the fifth attempt is still unsuccessful, the passing scores of other previously passed subjects will be invalidated. Subject 2 is scored out of 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, or deducting 5 points. The exam is considered passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. Subject 3 is scored out of 100 points, with a passing score of 90. The exam generally includes: vehicle preparation, light simulation test, starting, straight-line driving, gear shifting, lane changing, pulling over, proceeding straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and night driving.
20
5
Share

What are the body dimensions of the Hyundai ix35?

The body dimensions of the Hyundai ix35 are 4420mm in length, 1820mm in width, and 1690mm in height, with a wheelbase of 2640mm, making it a compact SUV. The vehicle is equipped with high-tech features such as a 6-speed automatic transmission, ESP stability control, hill start assist and descent control, brake override system, electronic throttle pedal, and an on-demand four-wheel-drive system. In terms of power, the Hyundai ix35 offers two engine options: a 2.0-liter and a 2.4-liter. The 2.0-liter engine delivers a maximum output power of 120kW and a maximum torque of 194Nm, while the 2.4-liter engine provides a maximum output power of 128kW and a maximum torque of 226Nm.
4
2
Share

What is the normal intake air temperature for a sedan?

Sedan intake air temperature is normally between 10 to 50 degrees Celsius. The intake air temperature sensor is a negative temperature coefficient thermistor. When the temperature rises, the resistance value decreases; when the temperature drops, the resistance value increases. The change in resistance within the circuit causes a change in voltage, thereby generating different voltage signals to complete the automatic operation of the control system. The intake air temperature sensor consists of a 5V voltage THA supplied by the engine ECU and an E2 ground wire connected to the engine's internal ground. It is installed on the intake pipe or inside the air flow meter, and its function is to detect the engine's intake air temperature and convert it into a voltage signal input to the ECU as a signal for fuel injection correction.
6
5
Share

What is the appropriate level to add coolant to a Nissan Sylphy?

The coolant in a Nissan Sylphy should be added to the middle position between the upper mark (MAX) and the lower mark (MIN) on the reservoir. The method for replacing coolant is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way water pipe. The coolant flows through the five-way pipe and is then distributed to different parts of the car to function. If there is any leakage of coolant in this section, the water pipe should be replaced or the interface re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continuously inject water into the reservoir so that it flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will be slightly pinkish. Continue adding clean water until the water coming out is clear. Note: Remember to disconnect the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. Then, add another bottle of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is expelled from the cooling system. Add more coolant until it reaches the maximum mark "MAXT" on the reservoir.
18
2
Share

What is the horsepower of the Fista?

The Fista has a horsepower of 140 hp and 204 hp. The car is equipped with a 1.4T engine with a peak torque of 240 Nm and a 1.6T engine with a peak torque of 265 Nm, paired with a 7-speed dual-clutch transmission. In terms of suspension, the front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. The dimensions of the Fista are 4600mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm. The car features a 10.25-inch central control color screen, Smartphone Interconnect 2.0 system, multiple driving mode selections, ESC body stability control system, and rear side airbag configurations.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.