How to reset the maintenance light on Volkswagen Lavida?

Why is the Land Rover Freelander 2's one-button start not working?

The reasons why the Land Rover Freelander 2's one-button start is not working are as follows: 1. Smart key battery depletion: This situation is most likely due to the smart key's battery being low, causing the start system to fail to detect the weak signal emitted by the smart key. It is recommended to pick up the smart key and place it on the start button, then press the button to start. 2. Steering wheel lock: The steering wheel lock is an anti-theft feature. When the car is turned off, turning the steering wheel from the straight position to a certain angle in one direction will lock the steering wheel. In the locked state, the one-button start function will not work.

8

5

Share

How much horsepower does the Magotan have?

Magotan is a B-class sedan under the Volkswagen brand, equipped with two versions of 2.0T engines: a low-power version and a high-power version. The low-power engine delivers 186 horsepower, while the high-power version produces 220 horsepower. Below are some key specifications of the Magotan: 1. Suspension: The front suspension uses a MacPherson independent setup, and the rear suspension employs a multi-link independent configuration. 2. Dimensions: The car measures 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm. It has a fuel tank capacity of 66 liters and a trunk capacity of 533 liters.

15

0

Share

What brand is the Lingyue car?

It is a sedan under the Southeast Motors brand. Below are specific details about the Lingyue: 1. Dimensions: The car measures 4420mm*1700mm*1415mm, with a fuel consumption of 5.8L/100km, a wheelbase of 2.5 meters, and a trunk capacity of 420 liters. 2. Powertrain: The Lingyue is equipped with a Mitsubishi Technology 1.5L-MIVEC engine, featuring DOHC double overhead camshafts and a variable valve timing system. 3. Features: The Lingyue comes with four-wheel disc brakes (both front and rear), ABS+EBD, 2SRS, and power windows for all four doors.

15

3

Share

What causes the Land Rover Discovery Sport's air conditioning to stop blowing air?

Land Rover Discovery Sport's air conditioning may stop blowing air due to the following reasons: 1. Blower malfunction: The blower is the core component responsible for air circulation in the car's air conditioning system. If it is damaged, the air conditioning will inevitably stop blowing air. Possible causes of blower failure include overheating damage to internal coils or capacitor failure. 2. Blocked air ducts: Outside air passes through the cabin air filter before entering the vehicle, which can accumulate various airborne particles, leading to potential blockages. 3. Control system failure: If none of the above causes apply, the issue may lie with the control system. Possible culprits include malfunctioning air vents, control switches, or the vehicle's air conditioning computer.

5

Share

What does it mean when the ABS yellow light on the dashboard is on?

When the ABS light is displayed on the car, it indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, which poses a significant safety hazard. There are several states in which the ABS light may illuminate, with different causes and solutions for each state, as detailed below: State 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed or the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases and the voltage rises, the ABS light turns off. The ABS system's power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and verify the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary. Check if the connector gap has widened; replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. Incorrect tire or wheel rim specifications may also be the cause. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and push the brake switch linkage down with a finger to its limit. Then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary.

10

1

Share

Can the old license plate be transferred to a used car?

Can the old license plate be transferred to a used car? The following is detailed information about transferring the old license plate to a used car: 1. Conditions: After the license plate transfer, the old license plate must have been used for one year and can be applied for a new car or a used car under the original owner's name. If there is a vehicle transfer between spouses, the new owner must continue to use the license plate for one year before it can be retained. 2. Notes: For vehicle transfer, you need to bring the vehicle registration certificate and the vehicle must be present. Both parties should bring their ID cards. If the buyer is from another city and needs to register a local license plate, they must apply for a temporary residence certificate at the local police station.

5

2

Share

How to reset the maintenance light on Volkswagen Lavida?

Why is the Land Rover Freelander 2's one-button start not working?

How much horsepower does the Magotan have?

What brand is the Lingyue car?

What causes the Land Rover Discovery Sport's air conditioning to stop blowing air?

What does it mean when the ABS yellow light on the dashboard is on?

Can the old license plate be transferred to a used car?

What is the actual range of Tesla Model 3?

Can an Automatic Transmission License Drive a Semi-Automatic Transmission Car?

Where is the daytime running light switch on the Baojun 510?

Where is the Tesla Referral Code?