How to reset the maintenance light on Volkswagen Bora?
3 Answers
Volkswagen Bora maintenance light reset method: 1. First press the wrench button with your left hand, then turn on the ignition switch with your right hand; 2. Release the wrench button with your left hand and press the minute adjustment button of the time setting knob, then turn off the ignition switch; 3. Remove your left hand from the time button, then turn on the ignition switch or start the engine again. The Bora is equipped with a cruise control system, standard EPB electronic parking brake and Autohold automatic parking function across all models. It also features a multi-function electric seat with 6-way power adjustment. The luxury version additionally includes seat heating function, Cleanair 2.0 air purification system, and dual-zone automatic climate control system.
Resetting the maintenance light on the Volkswagen Bora isn't too difficult. I've run my own auto repair shop for over ten years and often encounter this issue. First, turn off the ignition to ensure the car is completely shut down and the dashboard is dark. Then locate the reset button near the dashboard, usually a small knob labeled 0.0, and hold it down. Next, turn the key to the ON position, which lights up the dashboard without starting the engine. Keep holding the button for about 5 to 10 seconds until the wrench icon or maintenance reminder starts flashing and eventually disappears, then release the button. That's it! Why reset it? The maintenance light reminds you to change the oil or get a check-up. If you don't reset it after maintenance, it stays on, reducing its effectiveness. If the button sticks or doesn't work, check if the key is in the wrong position or try restarting the car's system. I recommend servicing every six months to keep the engine in good shape and save money. If all else fails, a quick trip to the 4S store will solve it in two minutes at no extra cost.
As a car enthusiast, I often follow online tutorials to tinker with my Volkswagen Bora. Resetting the maintenance light is super easy: turn off the engine, press and hold the 0.0 button on the right side of the dashboard, then turn the key to the ON position—don't start the engine. Hold the button for about 5 seconds until you see the light flash and go off. I've made a video sharing the foolproof steps: first, turn off the engine; second, press the button all the way down; third, turn the key to light up the dashboard, and release when the light flashes. If you don't reset it, the light stays on, which might mislead you about the maintenance timing. I recommend doing this after every service, using a bit of finesse instead of brute force. The Bora's maintenance light system is reliable, but if you're a new owner, first confirm the model year, as button locations may vary across versions. You can also download a phone app to track mileage. Regular maintenance keeps the car running smoothly—safety first, don't wait until the light comes on to fix issues.
