How to reset the maintenance light on Tiggo 3?
4 Answers
Tiggo 3's maintenance reminder light reset steps are as follows: 1. First, turn off the Chery Tiggo 3 key to make all dashboard lights go off. 2. Then press and hold the Chery Tiggo 3 maintenance light reset button. 3. Simultaneously turn on the Chery Tiggo 3 key to make all dashboard lights illuminate, then continue holding the button for a moment until the Chery Tiggo 3 maintenance cycle indicator enters reset mode. 4. Finally, release the Chery Tiggo 3 maintenance reset button, and press button "A" within 20 seconds to quickly restore the indicator light to normal display.
I've been driving my Tiggo 3 for several years, and the maintenance light always reminds me when it's time to change the oil. To reset it is quite simple. First, turn the key to the ON position, which is one step before starting the engine, but don't start it. Then, press and hold the small button on the dashboard, usually the trip reset button, without releasing it. Keep holding it for about 5 to 10 seconds, and you'll see the maintenance light start blinking or go off directly. At this point, release the button, and you're done. If it doesn't work the first time, try turning off the key and repeating the process. I recommend doing this in a quiet place and not rushing, as accidentally starting the engine or pressing other buttons might cause the light not to reset or lead to errors. Additionally, the maintenance light is part of the vehicle's reminder system, designed to protect the engine's lifespan. After resetting it, make sure to schedule a maintenance visit at the 4S shop on time; otherwise, the car might develop serious issues. If you can't handle it yourself, take the manual to a professional repair shop.
As a long-time owner of the Tiggo 3, I've researched the method to reset the maintenance light several times. The key is accessing the vehicle's setup mode. Turn the key to the ON position without starting the engine, then press and hold the reset button on the dashboard for about 10 seconds until you see the light change before releasing. This procedure might vary slightly depending on the model year - some require button combinations or waiting for indicator light confirmation. From my experience, sometimes it takes a few attempts, so don't get discouraged and consult your manual for specific instructions. The maintenance light serves to monitor service intervals - resetting it doesn't mean neglecting maintenance but rather restarting the reminder. Regularly checking your oil and filter condition can extend your car's lifespan. If unsure about the procedure, seek help from a car-savvy friend or visit a dealership for free assistance - safety comes first.
If the maintenance light on your Tiggo 3 comes on, don't worry. The steps to reset it are straightforward: turn the key to the ON position without starting the engine, immediately press and hold the mileage reset button for a few seconds, then release it when the light goes off. Usually, it works on the first try. When I drove this car, I only went for maintenance after the light came on to avoid wasting time. If the button doesn't respond, it might be due to low battery power or a minor glitch—try the procedure again or consult the user manual. After resetting the maintenance light, sticking to regular maintenance can prevent more serious engine issues, which is cost-effective and hassle-free. If all else fails, a quick visit to the repair shop will have it sorted in no time.
