How to Reset the Maintenance Light on Tianyu?
4 Answers
Tianyu maintenance light reset method: 1. First, press the start button to start the Tianyu vehicle; 2. Check the vehicle's dashboard, and the maintenance reminder will appear; 3. Press the SET button on the steering wheel; 4. Then press the SEL button on the right side of the steering wheel; 5. Press the cancel button on the steering wheel again; 6. Finally, the maintenance light reset is completed. The dimensions of this car are 4490 mm in length, 1730 mm in width, and 1555 mm in height, with a wheelbase of 2500 mm. Tianyu is equipped with two engines: the 1.6L engine has a maximum power of 80 kW and a maximum torque of 144 Nm; the 1.8L engine has a maximum power of 96 kW and a maximum torque of 170 Nm.
Last time the maintenance light on my Suzuki SX4 came on, I took some time to figure out how to reset it, and the process turned out to be quite simple. First, make sure the car is turned off with the key in the ACC position (the position before starting the engine), and definitely don't start the engine. Then, locate the small button on the dashboard, which might be the trip or mode switch button, and hold it down for about 10 seconds. You'll see the maintenance light start flashing and then turn off, indicating a successful reset. If it doesn't work, repeating the process once or twice should do the trick. Remember to perform this operation in a safe environment, such as a garage or parking lot, to avoid distractions while on the roadside. The maintenance light reminds us of the importance of regular maintenance, including oil changes and filter replacements. After resetting, it's best to schedule maintenance as soon as possible to avoid any negative impact on the engine's lifespan.
I found that resetting the maintenance light on the Tianyu doesn't require professional tools. Just follow a few simple steps to get it done. After getting in the car, turn the key slightly to illuminate the dashboard lights without starting the engine. Then focus on the Trip button—press and hold it for a few seconds, usually 5 to 8 seconds, until the maintenance indicator flashes and disappears. This light mainly serves as a reminder for scheduled maintenance, such as oil changes or brake inspections. Ignoring it for too long may lead to accumulated issues like reduced power or higher fuel consumption. After resetting, it's advisable to check your car's condition regularly rather than waiting for the light to come back on. The method is straightforward, but don't overlook the details. A friend of mine tried doing it hastily while driving, which didn't work and caused a false alarm—fortunately, it was just a scare.
When the maintenance light of my TianYu comes on, I learned to reset it by pressing the button, which is quite straightforward. Turn the key to the ACC position, hold down the Trip button on the dashboard until the light goes off, usually taking about ten seconds. This design is meant to remind car owners to go for regular maintenance at the shop. After resetting, don't forget to actually service the car.
