How to reset the maintenance light on the vv7?

[SanRiley]

The method to reset the maintenance light on the vv7 is: 1. Turn on the ignition switch, hold down the reset button with one hand, and turn off the ignition switch with the other hand; 2. Keep holding the reset button until the clock and mileage on the dashboard completely disappear, then release the button; 3. Hold down the reset button again, turn on the ignition switch, and the maintenance reminder on the dashboard will start flashing. Continue holding the reset button until the maintenance reminder stops flashing, then release the button and turn on the ignition switch again. Taking the WEY vv7 2021 2.0T Technology Edition as an example: its dimensions are 4760mm in length, 1931mm in width, and 1655mm in height, with a wheelbase of 2950mm, and a top speed of 205 kilometers per hour.

[OMalachi]

Last time I managed to reset the maintenance light on my VV7 by myself, and it wasn't actually difficult. First, power on the car without starting the engine, then press the menu button on the left side of the steering wheel to find the vehicle settings. Next, scroll to the maintenance information section where you'll see the maintenance reminder option. Hold down the confirmation button on the steering wheel for about 5 seconds until a reset prompt appears on the screen, then press confirm again to complete the process. Remember to wait until the dashboard shows a successful reset message – I wasted two attempts initially by not waiting long enough. This method works for VV7 models from 2017 to 2020; newer models might require operation through the central control screen, and the manual should have detailed instructions.

[LeAlina]

Resetting the VV7 maintenance light yourself really saves a trip to the 4S shop. First, power on the vehicle, then use the steering wheel buttons to navigate to the trip computer menu and locate the maintenance cycle settings. The key is to select the reset reminder option in the submenu and hold down the OK button without releasing it until the progress bar on the dashboard completes. I learned the hard way the first time by not watching the progress. This method works for most VV7 model years, though button positions may vary slightly between different years—refer to page 78 of the owner's manual for illustrated instructions. After resetting, remember to note down the next maintenance mileage for better planning.

[LukeMarie]

Resetting the maintenance reminder light on the VV7 is actually quite straightforward. After powering on the vehicle, press the menu button on the steering wheel to navigate to the maintenance settings in the vehicle information page. Then select the reset option and hold down the confirmation button until the prompt disappears. The key is to perform this operation when the vehicle is completely stationary—last time I tried resetting while pressing the brake pedal and it didn’t work. After resetting, the system will restart the countdown based on the factory settings of 5,000 kilometers or six months, but the actual maintenance interval should depend on the quality of the oil you use. Full synthetic oil can actually last for 7,000 to 8,000 kilometers before needing a change, so don’t feel constrained by the light.