···
Log in / Register

How to Reset the Maintenance Light on the Volkswagen Lavida Hatchback?

3 Answers
SanDante
07/24/25 1:29pm
Method to reset the maintenance light on the Volkswagen Lavida Hatchback: 1. Turn off the ignition switch; 2. Press and hold the 0.0 button on the instrument panel; 3. Turn on the ignition switch while continuing to hold the 0.0 button with your left hand; 4. Release the 0.0 button when the display on the instrument panel shows "Reset". Taking the 2017 Volkswagen Lavida Hatchback as an example, it belongs to the compact car category, with body dimensions of: length 4445mm, width 1765mm, height 1485mm, wheelbase 2610mm, fuel tank capacity 55l, and curb weight 1220kg. The 2017 Volkswagen Lavida Hatchback features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 110ps, maximum power of 81kw, maximum torque of 155nm, and is paired with a 5-speed manual transmission.
Was this review help?
5
2
Share
EvelynRose
08/10/25 6:39am
I've been running an auto repair shop for over a decade and often help customers reset the maintenance light on Volkswagen Lavidas. The procedure is actually quite simple. First, make sure the car is completely turned off with the engine not running. Then press and hold the small '0.0/SET' button on the dashboard without releasing it. Next, insert the key and turn the ignition switch two clicks (don't start the engine), while continuing to hold the button for about 10-15 seconds until you see the maintenance reset message or countdown numbers flash on the screen. Release the button when the prompt disappears, and the light will go off. Note that the procedure might vary slightly for different model years - for example, pre-2018 models require turning on the power first before pressing the button. It's best to check the owner's manual or app first. The maintenance light indicates it's time for an oil change or inspection. Resetting it ensures timely reminders for the next service. Don't skip this - regular maintenance keeps your car running longer and safer. I recommend checking every 5,000 kilometers to avoid costly major repairs later.
Was this review help?
5
3
Share
Expand All
Monica
09/25/25 6:02am
As a family car owner, I have reset the maintenance light on my Lavida several times. The method is not difficult: park the car and turn off the engine, but do not start it. Press and hold the 'SET' button on the dashboard with your finger. Then turn the key to the ACC position, where the dashboard lights up but the engine does not start. Hold for about ten seconds until the light flashes and goes off. Last time, my 2016 model succeeded on the first try. If you can't get it done, don't force it; go to the 4S shop and ask for free advice. Only after the maintenance light is off will you know when the next maintenance is due, so reset it in time without delay. Remember to service your car every 8,000 kilometers during daily driving to keep the engine running smoothly and avoid problems, saving money and giving you peace of mind.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

Should a Turbocharged Car Install an Underbody Shield?

Whether a turbocharged car should install an underbody shield depends on individual driving habits and road conditions. The following is an introduction to turbocharged cars: 1. Introduction: The centrifugal compressor and turbine are combined into a whole, called a turbocharger. 2. Components: The turbocharger also includes bearing devices necessary for normal operation, lubrication and cooling systems, sealing and insulation devices, as well as fixed parts such as the compressor housing, intermediate housing, and turbine housing. 3. Working Principle: Turbocharged engines on the market rely on turbochargers to increase the engine's air intake. A turbocharger (Turbo) is essentially an air compressor.
1
0
Share

What does single-color ambient lighting mean?

Single-color ambient lighting means the color of the ambient lighting is fixed and cannot be changed. Here is some relevant information about ambient lighting: 1. Introduction: Interior ambient lighting is a decorative lighting system, typically featuring light strips installed on the dashboard, door panels, roof, and center console. It comes in single-color or multi-color options, usually in red, blue, green, etc., primarily to enhance the cabin's visual appeal at night, create atmosphere, and set the mood. 2. Control: Interior ambient lighting can be categorized by control methods into smartphone control, knob control, remote control, and vehicle system control. Most aftermarket installations use smartphone control or knob plus remote control. Factory-installed ambient lighting and those using original protocols are almost exclusively controlled by the vehicle's system.
9
5
Share

What causes high idle speed in BYD F3?

The main reasons for increased idle speed in BYD F3 include: excessive air intake, excessive fuel injection, or incorrect engine control signals. However, a sudden increase in idle speed does not necessarily indicate a vehicle malfunction. It is important to conduct timely inspections and repairs to identify the specific issue. Below are the causes of abnormal idle speed: 1. Throttle valve malfunction: A dirty throttle valve can cause errors in the throttle opening angle, reducing its sensitivity. During idle, the throttle may not close properly, leading to abnormal idle speed. Additionally, throttle valve issues can affect engine power, acceleration performance, and fuel consumption. In severe cases, it may even cause difficulties in starting the engine. 2. Idle speed control valve malfunction: A faulty idle speed control valve can prevent proper adjustment of idle speed, leading to unstable idle, difficulty in cold starts, and other issues. In severe cases, the engine may not idle at all and stall when the accelerator is released. 3. Sensor malfunction: Faulty sensors can cause the engine control unit (ECU) to make incorrect judgments, or the ECU itself may malfunction, resulting in abnormal engine idle speed.
9
1
Share

Will blending clear coat damage the original paint?

It has minimal impact. The purpose of blending clear coat is to harmonize the color between the repaired area and the surrounding sections, enhancing the gloss of the repaired area to make differences less noticeable. Blending clear coat is sprayed at the junction of new and old paint surfaces to blend them together, serving as a transition to reduce color discrepancies. Extended content: Instructions for using blending clear coat: 1. Mixing ratio: Ready to use without mixing. 2. Spray gun pressure and tools: Gravity feed spray gun with 2bar pressure, nozzle size 1.2-1.5mm; suction feed spray gun with nozzle size 1.4-1.7mm. 3. Application method: After completing the paint repair, lightly spray blending clear coat once at the junction area, then wait 15 seconds and lightly spray again. 4. Suitable for: 2K topcoat, two-component clear coat. 5. Not suitable for: 1K basecoat. 6. Storage life: Can be stored for over 2 years with tight lid sealing, storage temperature at 20°C.
16
0
Share

Should the Prado use 0w20 or 5w30?

The Prado requires the use of 5w30 viscosity engine oil, as 0w20 viscosity oil is too low for its engine. The domestic version of the Prado is equipped with a 3.5-liter naturally aspirated V6 engine, while the Middle Eastern version features a 4.0-liter naturally aspirated engine. These engines are large-displacement, multi-cylinder naturally aspirated units, hence requiring 30 viscosity oil. Here are the relevant details: 1. Using the appropriate oil: During normal engine operation, the oil forms a protective film on the surfaces of various engine components, reducing wear and friction between parts. If the oil viscosity is too low, it cannot maintain a stable protective film during operation, which can accelerate engine wear. Engines operate at high temperatures, and low-viscosity oil tends to thin out under these conditions, making it unsuitable. 2. Oil specifications: The 'w' in oil grades stands for 'winter.' The number before 'w' indicates the oil's low-temperature flow performance. For example, 0w oil can flow normally at -35°C, while 5w oil can flow at -30°C. The number after 'w' represents the oil's high-temperature viscosity—the higher the number, the higher the viscosity. When purchasing oil, focus on the number after 'w' and choose the viscosity that best suits your vehicle's engine.
10
1
Share

Can a C2 Driver's License Drive a Lamborghini Sports Car?

Can a C2 driver's license drive a Lamborghini sports car? Below are the relevant details: 1. C2 driver's license: Typically refers to a C2 driving license, which permits driving small and micro passenger vehicles, as well as light and micro automatic transmission cargo vehicles. Compared to a C1 license, the range of vehicles allowed by a C2 license is somewhat narrower, limited to its own permitted vehicle types and those allowed by a C5 driving license. 2. Vehicles not permitted by a C1 driving license: Large buses, tractors, city buses, medium-sized buses, large trucks, regular three-wheeled motorcycles, regular two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.