How to Reset the Maintenance Light on the Vezel?

1 Answers
MacSteven
07/30/25 8:33am
Honda Vezel maintenance light reset method is as follows: 1. Press the "A" button and depress the brake pedal, neither should be released midway. 2. Do not start the engine, but the vehicle's power must be turned on. 3. At this time, the dashboard or characters will start flashing. 4. Continue holding down the reset button "A" until "..." appears on the display. 5. Release the brake pedal and the "A" button. 6. Turn off the vehicle's power to complete the maintenance light reset. Below is more information about the Honda Vezel: 1. The Vezel is the first SUV under GAC Honda, officially launched on October 25, 2014. 2. The Vezel's dimensions are 4294mm in length, 1772mm in width, 1605mm in height, with a wheelbase of 2610mm.
Was this review help?
17
0
Share
More Forum Discussions

Does Revving the Engine in Neutral Damage the Car?

Revving the engine in neutral can indeed damage the car, primarily harming the engine and accelerating its wear. This is especially destructive when the car is not running, as repeatedly revving the engine can lead to carbon buildup, and prolonged idling can harm the engine. The throttle, also known as the accelerator or gas pedal, is the control device that regulates the engine's power (thrust). In piston aircraft engines, the throttle controls the carburetor's throttle valve opening to regulate the cylinder's filling volume, thereby determining the engine's output power. In gas turbine engines, the throttle controls the metered fuel flow of the fuel regulator, thus determining the thrust generated by the engine.
8
3
Share

Does a New Car Need a Break-in Period?

New cars do require a break-in period, which refers to the initial driving phase after purchasing a new car or after a major overhaul. The break-in period is typically around 5,000 kilometers. Precautions during the break-in period of a new car include: 1. Maintain smooth starts, avoid sudden acceleration, and do not let the engine RPM get too high; 2. Ensure the coolant temperature reaches above 50 degrees Celsius before starting, begin in a low gear, and shift to a higher gear after 1 kilometer; 3. Shift gears promptly while driving, avoid prolonged use of a single gear, and do not drive at low speeds in high gears or at high speeds in low gears; 4. Choose good road conditions to avoid excessive vibration and impact, and disengage the clutch before braking; 5. Use high-quality fuel and engine oil, and avoid using engine wear-resistant additives.
9
4
Share

What does rear side privacy glass mean in cars?

Rear side privacy glass in cars refers to the side windows that are coated with a special film, making all rear side windows darker to enhance privacy inside the vehicle and block sunlight. This feature is commonly found in many business vehicles. Its functions include: 1. Enhancing privacy inside the vehicle; 2. Blocking sunlight to provide a safer and more comfortable environment for passengers. Privacy glass is made using a metal functional layer through lamination or magnetron sputtering technology, offering high performance in reflecting solar radiation heat and visible light. Maintenance methods for the glass include: 1. Using dedicated or suitable wiper blades to avoid scratching the glass; 2. Using a soft cloth when cleaning the car; 3. Using specialized glass cleaner to wash the glass; 4. Applying heat-insulating film to the glass.
8
5
Share

What is the displacement of the Shanghai Volkswagen Passat 330tsi?

The displacement of the Shanghai Volkswagen Passat 330tsi is 1.8T. Displacement refers to the total working volume of all engine cylinders, which is the volume swept by the piston from top dead center to bottom dead center multiplied by the number of cylinders. The Shanghai Volkswagen Passat is a mid-sized 4-door, 5-seat sedan with dimensions of 4933mm in length, 1836mm in width, and 1469mm in height, a wheelbase of 2871mm, and a fuel tank capacity of 68.5 liters. The Passat is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. It is paired with a 7-speed dual-clutch transmission. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
12
3
Share

What to Do When the Engine Exhaust System Warning Light Comes On?

Engine Exhaust System Warning Light Comes On? The solutions are: 1. Start and turn off the vehicle three times in a row, or disconnect the negative terminal of the engine battery, wait for 30 seconds, and then reconnect it; 2. If the light comes on while driving, immediately reduce speed and drive to the nearest service station for inspection. The reasons for the engine exhaust system warning light coming on are: 1. Impact during driving, tampering with a certain connector on the engine, or temporary signal interruption in the ECU; 2. Poor combustion of the air-fuel mixture; 3. Irregular maintenance or poor driving habits; 4. Failure to use the required fuel grade.
13
4
Share

Where is the seat heating in the Polo?

The seat heating in the Polo is located above the air conditioning control buttons on the lower part of the center console. The button in the left red frame is the driver's seat heating switch, and the button on the right is the passenger seat heating switch. Seat heating works by using internal resistance wires to heat the seat, causing it to warm up gradually in a short time. There are no safety hazards when using seat heating, and the internal materials will not easily cause short circuits, open circuits, or aging even under harsh conditions. The Polo is a model under SAIC Volkswagen. In terms of suspension, the Polo features a MacPherson strut front suspension and a torsion beam rear suspension.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.