How to Reset the Maintenance Light on the Tiguan?

1 Answers
OSawyer
07/29/25 10:45pm
The method to reset the maintenance light on the Tiguan is: 1. Turn off the ignition switch and shut down the engine, press and hold the right button (reset or zero) on the instrument panel with your left hand; 2. While holding the right button with your left hand, turn on the ignition switch; 3. Continue holding the reset button with your left hand until the maintenance light enters the reset mode, then release the right button (reset or zero button); 4. Within 20 seconds of releasing the right button, press the left button 'menu or time setting' once to confirm the reset. The Tiguan is a compact 5-door, 5-seat SUV under SAIC Volkswagen, equipped with a 6-speed automatic manual transmission, with a top speed of 190 kilometers per hour.
Was this review help?
20
2
Share
More Forum Discussions

What to Do If the Car Noise Is Too Loud?

Here are the solutions for excessive car noise: 1. Replace the tires to prevent noise caused by tire wear. 2. Reinforce the engine to prevent engine failure. 3. Replace the engine oil with higher-quality oil. 4. Perform full-car soundproofing to reduce noise pollution. The causes of excessive car noise are as follows: 1. Severe tire wear: When the tires have bulges, air leaks, or severe wear, friction can generate noise during normal driving. 2. Aging car parts: Over time, components such as the engine, brakes, exhaust pipe, and seats may loosen due to aging, leading to noise. 3. Low-quality engine oil: Using low-quality oil can cause impurities to clog the oil passages, and the engine may not be properly lubricated, resulting in noise. 4. Damaged soundproofing material: If the car's soundproofing material is damaged.
11
3
Share

Where does the license plate 'Min D' belong to?

Min D is the license plate for Xiamen, Fujian. Below is an introduction to the local license plates in Fujian Province: 1. Min A: Fuzhou (excluding Pingtan County), Min B: Putian, Min C: Quanzhou; 2. Min D: Xiamen, Min E: Zhangzhou, Min F: Longyan; 3. Min G: Sanming, Min H: Nanping, Min J: Ningde; 4. Min K: Provincial system, Pingtan Comprehensive Experimental Zone. The following is an introduction to license plates: 1. The first character of a license plate is a Chinese character representing the abbreviation of the province where the vehicle is registered. 2. The second character is an English letter representing the code for the prefecture-level city where the vehicle is located. Generally, 'A' is the provincial capital, 'B' is the second largest city in the province, 'C' is the third largest city, and so on. The last few digits are the sequential number of the license plate.
10
3
Share

Is the fuel consumption high for the 2009 Tucson model?

The fuel consumption is relatively high for all three variants of the 2009 Tucson. Detailed information about the fuel consumption of the three 2009 Tucson variants is as follows: 1. Equipped with a 2.0L 141HP L4 engine and a 4-speed automatic transmission, the average fuel consumption is 10.69 liters per 100 kilometers, with a range of 9.14~12.25 liters per 100 kilometers. 2. Equipped with a 2.0L 141HP L4 engine and a 5-speed manual transmission, the average fuel consumption is 9.59 liters per 100 kilometers, with a range of 8.43~10.74 liters per 100 kilometers. 3. Equipped with a 2.7L 175HP V6 engine and a 4-speed automatic transmission, the average fuel consumption is 13.29 liters per 100 kilometers, with a range of 11.75~14.84 liters per 100 kilometers.
15
0
Share

What is the purpose of an automotive filter?

Automotive filters are primarily used to remove impurities such as dust, metal particles, carbon deposits, and soot particles from engine oil, thereby protecting the engine. There are mainly two types: 1. The first type: Full-flow filter. It is connected in series between the oil pump and the main oil passage, filtering all the lubricating oil entering the main oil passage. 2. The second type: Bypass filter, which is connected in parallel with the main oil passage and only filters a portion of the lubricating oil pumped by the oil pump. The oil filter removes harmful impurities from the oil coming from the oil pan, supplying clean oil to moving parts such as the crankshaft, connecting rod, camshaft, turbocharger, and piston rings, providing lubrication, cooling, and cleaning functions, thereby extending the lifespan of these components. Simply put, the role of the oil filter is to filter the engine oil, making the oil entering the engine cleaner and preventing impurities from entering and damaging the precision components of the engine.
13
3
Share

Is It Normal for the Car Temperature Gauge to Be at Half?

Having the temperature gauge at half is normal for engine temperature. Generally, when the car engine is operating, the temperature fluctuates between 85-100 degrees Celsius. Here is some relevant information: 1. Temperature Gauge: The temperature gauge ranges from C to H, where C represents 60 degrees. As long as the pointer on the temperature gauge points to C, it indicates the temperature has reached 60 degrees. The H red mark represents a temperature of 110 degrees. The span from 60 to 110 degrees allows you to estimate the temperature indicated by the gauge. 2. Precautions: Turning on the air conditioning can cause the engine temperature to rise because the engine idles automatically to generate more heat, making it difficult for the car to stop. The cooling speed from the fan might not be sufficient, but most cars won't experience this issue as they are equipped with a temperature-controlled fan. Prolonged high engine temperatures can reduce the lubrication effectiveness of engine oil, leading to increased wear on internal engine components.
2
3
Share

Can I Get a Local License Plate in Another City?

You can get a local license plate in another city. According to national regulations, as long as the vehicle meets the standards and satisfies the local license plate registration requirements, you can proceed with the license plate registration process, regardless of where the vehicle was purchased. There is not much difference between registering a license plate in another city versus locally. Materials required for registering a vehicle purchased in another city: Vehicle qualification certificate; Purchase invoice; Proof of compulsory traffic insurance; Vehicle purchase tax certificate; ID card; Residence permit. Specific process for registering a vehicle purchased in another city: Purchase the vehicle at a local 4S store. Prepare a temporary license plate for the journey back in case of traffic police checks. Be sure to note the validity period of the temporary license plate. Contact the local insurance company to purchase the corresponding compulsory traffic insurance and vehicle damage insurance by providing the vehicle frame number before registering the new vehicle. Complete the license plate registration process at the local vehicle management office.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.