How to reset the maintenance light on the Shuailing T6?

Why Can't the Gear Be Engaged in a Manual Transmission Car?

The reasons why the gear cannot be engaged in a manual transmission car are: 1. The gear is not engaged and is in neutral; 2. The gear switch of the transmission is faulty; 3. The clutch is not fully depressed; 4. The synchronizer is not installed, causing the gear teeth to misalign; 5. The handbrake is not released, and the car is in manual braking state. The starting steps for a manual transmission car are: 1. After starting the car, press the clutch pedal all the way down with the left foot to completely disengage the clutch; 2. Shift the transmission into first gear; 3. Press or lift the electronic handbrake button; 4. Ensure safety by observing the road and other vehicles or pedestrians; 5. Continue to press the clutch pedal with the left foot to keep the clutch disengaged, press the accelerator pedal with the right foot, and slowly release the clutch pedal with the left foot.

9

5

Share

How to Determine the Production Date of New Car Glass?

Confirming the production date of new car glass can be done by: 1. Checking the code at the lower left or lower right corner of the window glass; 2. The number represents the year, and the dots represent the month; 3. If the dots are in front of the number, it indicates the first half of the year, and subtracting the number of dots before the number from 7 gives the month in the first half; 4. If the dots are behind the number, it indicates the second half of the year, and subtracting the number of dots after the number from 13 gives the month in the second half. The classification and functions of car glass are: 1. Laminated glass: Transparent adhesive plastic film is applied between two or three layers of glass, increasing the glass's resistance to breakage; 2. Tempered glass: Ordinary glass is quenched to form certain internal stresses, and when impacted and broken, the glass splits into small fragments with blunt edges, reducing the risk of injury to passengers.

6

1

Share

What's the Difference Between Buying a Car from an Auto Trade Shop and a 4S Store?

The differences between buying a car from an auto trade shop and a 4S store are as follows: 1. Different store locations: Auto trade shops are mostly located in downtown areas, while 4S stores generally require larger spaces and are usually located farther from the city center. 4S stores have grand appearances and offer both pre-sales and after-sales services; however, auto trade shops have relatively lower requirements, with just two storefronts on the street being enough to sell cars. Additionally, 4S stores exclusively sell one brand, whereas auto trade shops can offer a variety of brands. 2. Different sales prices: Generally, 4S stores have higher labor costs and other expenses like store rents compared to auto trade shops, and they have their own pricing regulations for each car. However, auto trade shops can source cars not only from local 4S stores but also from other regions, leading to significant price differences.

4

2

Share

What Are the Consequences of a Faulty Car Voltage Regulator?

The consequences of a faulty car voltage regulator include: 1. Consequence one: Unstable voltage. The voltmeter will show a charging voltage lower than normal, possibly even below the battery's original voltage. Additionally, the horn sound will diminish, and the lights will dim. 2. Consequence two: Impact on ignition. The voltage regulator stabilizes the circuit required for starting, ensuring stable and effective ignition. A car voltage regulator is a power supply circuit or device capable of automatically adjusting the output voltage. Its main functions are: 1. Voltage stabilization: It stabilizes the power supply voltage during car startup and when electrical appliances are in operation, maintaining the fluctuating or inadequate power supply voltage within its set range, allowing various circuits or electrical devices to operate normally at their rated voltage. 2. Circuit control: It samples, compares, amplifies, and then drives the servo motor to rotate, changing the position of the voltage regulator's carbon brush. By automatically adjusting the turns ratio of the coil, it ensures the output voltage remains stable.

5

0

Share

How to adjust the time on a Bora?

Here is the method to adjust the time on a Bora: 1. There are two buttons on the Bora's dashboard, the left one has a time symbol, and the right one is the 0.0/SET button. Press the left time button, and the time display will flash. 2. Press the right SET button to adjust the time. Here is some related information: 1. The lights in the Bora's dashboard are designed with certain rules. Red lights are generally danger warning lights. 2. Yellow lights are fault indicator lights. When a yellow light on the dashboard lights up, it informs the driver that a certain system's function has been lost. For example, if the ABS warning light comes on, it directly means the ABS is no longer functioning, which might cause the wheels to lock up during braking. 3. Green indicator lights are status lights, showing what working state the vehicle is in. For example, the power mode indicator light for automatic transmission or the HINLO for body height adjustment are not warning the driver but indicating the vehicle's current state.

10

5

Share

Must Pickup Trucks Weigh In Before Entering Highways?

Pickup trucks must weigh in before entering highways. The specific circumstances are as follows: 1. Avoid overloading: As pickup trucks are still classified as trucks, violations such as speeding, exceeding width limits, overloading, improper lighting, and reflective strip issues will incur penalties. 2. Toll charges: Similar to passenger vehicles, standard toll rates apply. Precautions for pickup trucks entering highways include: 1. Refuse overloading: The pickup truck policy clearly states that closed highway toll stations must implement non-stop weight detection at entry points. Since tolls aren't weight-based, the purpose of weighing is obviously to prevent pickup truck overload violations. 2. Speed limits for pickups: Following commercial vehicle speed standards, the speed must not exceed 100km/h. Blue-license plate pickups also have a 100km/h speed limit. Exceeding the limit by 50% or more will result in immediate deduction of 12 driver's license points.

7

1

Share

How to reset the maintenance light on the Shuailing T6?

Why Can't the Gear Be Engaged in a Manual Transmission Car?

How to Determine the Production Date of New Car Glass?

What's the Difference Between Buying a Car from an Auto Trade Shop and a 4S Store?

What Are the Consequences of a Faulty Car Voltage Regulator?

How to adjust the time on a Bora?

Must Pickup Trucks Weigh In Before Entering Highways?

Where is the PCV valve located in the engine?

What driving modes does the Mercedes-Benz C200 have?

How many kilometers between maintenance intervals for the Boyue?

What should I do if the engine warning light comes on in a new car?