How to reset the maintenance light on the Roewe erx5?
3 Answers
The method to reset the maintenance light on the Roewe erx5 is: 1. Turn off the ignition switch; 2. Press and hold both arrow buttons simultaneously, then turn on the ignition switch; 3. Release both arrow buttons after approximately 3 seconds; 4. The reset menu will appear, press and hold the set button for more than 3 seconds; 5. Press the mode button to confirm. The Roewe erx5 is a compact 5-door, 5-seat SUV with body dimensions of: length 4554mm, width 1855mm, height 1716mm, and a wheelbase of 2700mm. It is equipped with a 116-horsepower permanent magnet synchronous single motor and an electric vehicle single-speed transmission, with a maximum power of 85 kW and a maximum torque of 255 Nm.
I remember the last time the maintenance light came on in my Roewe ERX5, I followed an online tutorial to reset it myself. The steps were quite simple: first, park the car and turn off the engine, then turn the key to the ON position to illuminate the dashboard without starting the engine. Next, locate the small TRIP button near the steering wheel, which is usually used to toggle the mileage display, and hold it down for 5 to 10 seconds. At this point, you'll see the maintenance light on the dashboard blink once and then turn off, indicating a successful reset. After resetting, the system will recalculate the maintenance interval, and the reminder will only appear again when it's time. If you don't perform this reset, the light will stay on, potentially leading to misjudgment of the maintenance cycle and inadequate vehicle upkeep. I recommend that new car owners reset the light promptly after maintenance to develop good habits and ensure accurate records. Additionally, Roewe's design is quite user-friendly—once you learn it, you'll remember it.
Having owned the Roewe ERX5 for over two years, I always reset the maintenance light myself. Here's how: Without starting the engine, just press the ignition button to the ON position (dashboard lights on). Then locate the TRIP button (a rotary knob) on the left side of the steering wheel, press and hold it firmly for about 10 seconds. Once the maintenance reminder disappears, the reset is successful - very convenient. Note that button positions may vary slightly across model years. For instance, my 2020 version has it on the right side, so consulting the manual is crucial to avoid mistakes. After resetting, the system returns to normal and accurately reminds you of the next service interval. This little trick saves me trips to the dealership. Remember to reset immediately after maintenance – don't delay – it greatly benefits vehicle condition management.
